ZTR how are you doing? Did you fix the crank collar issue on your motor? I run the anti lag just using the vss and even though I have fixed the crank collar problem, i am not using hard cut at all. Hard cut is lethal on the motor and mostly your turbo and oil pump. Do a 1 or 2 setting on your redline cut off. Its pretty simple to set the anti lag using your vss, just follow the instruction on the help menu. For a launch setup start 2step Retard Rev at 3k rpm as the start and 2step Ignition Cut at 3800rpm. Now depending on your 2step Rev Limit setting you will spool standing still as you step on the gas. Once again try to keep the Rev Limit numbers down as it is very hard on your motor and turbo. I have seen the compressor wheels shredded due to hard cut anti-lag setting on Evos due to the deflection of the turbine shaft and the blades shredding on the compressor housing.