Jump to content
HybridZ

OneSickZ

Members
  • Posts

    37
  • Joined

  • Last visited

About OneSickZ

  • Birthday 07/10/1978

Profile Information

  • Location
    Orlando

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

OneSickZ's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. updated pic Thanks for answering my pm jody! you rock!
  2. OneSickZ

    z31 swap

    it is built now. and i built the car, my buddy(owner of CFT) and me tuned it. i made 280hp 345tq with a stock engine, stock ecu and stock turbo with just a fuel pump, gutted intake, flywheel,exhuast and starion fmic. Made 450 with same as above just a 60-1 turbo and jwt plugnplay kit i made 489 on a stock bottom end with the same 60-1 turbo and jwt plugnplay kit with cams I made 530hp and 501 tq (notice the tq? far above sr territory for that power level) with the same as above just built the motor because i broke it when i didn't know my fpr gauge was bad All the above we also way before nistune exsited and i've built numerous sr20 cars. even a 622hp one.. I love the sr motor but there is no comparison the vg owns the SR. Even more so in the z31 frame as you suggested.
  3. you ROCK. thanks ill post pics once i figured out my hybrid rear end swap.
  4. im not sure but that would make my day!! maybe the shaft from boot to boot? check red-dot's on pic: as well as a visual idea? or what ever you can figure out. it doesn't have to be exact. i just need a shorter vs longer answer. thanks sir. It looks shorter but i need proof.
  5. im speaking about the vg30dett axles not the vg30e or vg30et. thanks
  6. I know the drivers side and passanger side are diff lengths. But does anyone know for sure which side is which. Is the drivers side the longer one or shorter one?
  7. Satan how many bolt are on the r200 (Q45) ring gear? any options there.
  8. 84-86 turbo z31's were T5's similar to that of everycar that uses a t- The input shafts and bellhousings are what's diff between the cars
  9. Sorry i didn't explain enough as it is topic related. im having rfi issues and need a resistor plug so i was searching and found this post which describes some of my issues and im just trying to hunt it down. EDITED by mobythevan:question was where do you get your br8 plugs from and I am concerned about 5/8 vs 13/16 Answer: Autozone or http://www.sparkplugs.com/default.asp?KID=2521&gclid=CL63mrLxz5gCFQNbxwodWT3W1A
  10. http://www.ngk.com/results_cross.asp?pid=BPR7E&x=36&y=14 unless u mean BPR7ES: http://www.ngk.com/results_cross.asp?pid=bpr7es&x=44&y=5 the only diff is the S which indicates no v-groove any reason you run the PRojected tip over the standard tip ? I know a projected style spark plug firing tip temperature is increased by 10°C to 20°C and that a projected tip gives you an additional step between heat ranges..... so a bpr7 is like a 6.5 br haha just asking.. And this thread is 9 years old.....
×
×
  • Create New...