Jump to content
HybridZ

kontkommer

Members
  • Posts

    3
  • Joined

  • Last visited

Everything posted by kontkommer

  1. Hi guys, I did some work on the interior of my 77 280Z and removed the dash, center console, steering column + switches, heater core and I also disconnected the fusebox and relays and and ziptied those to the side to get work space. Yesterday I wanted to get the car running again because I am moving to a new house in a few weeks and need to move it. So I reinstalled the dash, the steering column + switches, the center console and connected the fusebox en relais. But I left the heater core and the heater controls out so a few plugs are not connected.. Now I don't have any power to any of the systems. None of the lights work and the ignition switch does nothing. I have tested the ignition switch which is ok. If I supply power to the ignition switch power pin I hear the ignition relais clicking but nothing happens so the ignition relais has also no power. If I supply power at the hazard light switch which is part of the ignition switch circuit de car starts cranking. Are the heater core and/or the heater controls essential parts of the electric system? Or is there something else wrong here? Thanks! Reinier Okay so I am a moron. I had forgotten two giant connectors just behind the firewall.
  2. Hi guys,Does anyone know why the frame rails (aka floor supports) don't run de complete length of the floor pan in the rear? They stop around 3 inches in front of the end. See picture.I need to replace those end sections I was wondering if I can just extend them to the end because I think that will give extra strength. Or is there a good reasons they don't run to the end?Thanks!ReinierAmsterdam, The Netherlands
×
×
  • Create New...