Jump to content
HybridZ

Cunnz240

Members
  • Posts

    6
  • Joined

  • Last visited

About Cunnz240

  • Birthday 11/06/1988

Profile Information

  • Gender
    Not Telling
  • Location
    Oviedo, FL

Cunnz240's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. I just switched the internals of the distributers out and ran it into the same harness using the z31 distributer connection. Ok so pin 65 is connected to a switched 12v power to turn the ecu on? And pin 20 goes to the FPR that is controlled by the ecu? Thanks, -S
  2. Ok so I have a L28ET in a 73 240z. I currently have the 280zx harness and computer in the car, but the harness is in poor condition and the engine runs poorly. I now have a complete 88 turbo harness and ecu and am trying to swap it into the car. I have already done all the distributer work so all thats left is finding all the connections for the harness. What im having touble finding is the location of the ignition wire that turns the ecu on. Also I cannot find where the output wire to the fuel relay is. Any help/ tips would be greatly appreciated. Thanks, -S
  3. I have to say, my timing always seems to be perfect. -S
  4. Im looking for stock turbo injectors for the L28et. Something in fairly good condition. Thanks, -S
  5. I just took a look at those injectors and they are very different. So never mind about them, but the harness question still remains.
  6. I have a 240 with a l28et. I have access to an 88 turbo z31 parts car in almost perfect condition. I have read up about the swap and how to splice it into the existing harness. I would like to know if it is possible to just swap in the z31 harness as well. Also is it possible to run the side feed injectors on my motor. I dont want to have to run resistors to each injector, as the 88 injectors are high impedance and my current ones are low. My current injectors are also in pretty bad shape and i know that these ones are in very good shape. Thanks. -S
  7. Cunnz240

    Z

  8. I need the upper door hinge for a 73 240z. I believe any hinge from a 70-78 will work.
  9. Im looking for a complete l28 motor. If it is turbo i am also interested in the fuel injection and ecu. If it is non turbo than im just interested in the longblock. I am located in central florida.
×
×
  • Create New...