Jump to content
HybridZ

98blackbell

Members
 View Profile  See their activity

  • Posts

    176

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by 98blackbell

  1. 98blackbell
    Nice!
  2. 98blackbell
    Found a plug at Pep Boys. Got that plugged up then had oil leak. The an -4 90 onto the turbo was leaking at the hose. Went to tighten and snapped it off. Back to Pep Boys. They had 2, can you believe that. Back on and runs , no leaks. Need to put some miles on it before taking it to the track. Still need to finish the trunk area where we hung the fuel cell. I think tooquick is going to take the 88 Volvo rally cross in the dirt Saturday in Macon Ga. We swapped the cam out rigged up a cold air intake with a new alternator. Hillarious watching the car drifting. Stay tuned.
  3. 98blackbell
    Some work done.
  4. 98blackbell
    Onto next mods. We are unhappy with the fuel system;tank, lines, pump Currently using the stock metal lines for supply and return. Msd2225 fuel pump. We are having fuel starvation on low fuel level and vacuum issues from poor venting. New plan is to remove fuel tank, remove spare tie wheel well and mount a fuel cell. Run -8 AN lines and fittings. Canister fuel filter. New fuel rail and fuel regulator. Run -8 fuel lines for supply and return. Just to add more work we are removing the 38mm tial blow off and adding a turbo smart blow off valve. Adding a hybrid t3/t4 turbo. Updating the exhaust, moving the oil cooler from between the radiator and inter cooler. Process and pictures are coming.
  5. 98blackbell
    That's respectful! Close to your goal with a few more things to work on. Now drive and enjoy! Well if you are like us your never totally satisfied.
  6. 98blackbell
    Great build, How are engine temps? Wondering because we set up our oil cooler between the inter cooler and radiator like yours. Having some temp issues when hot lapping at events.
  7. 98blackbell
    ANy issues with that hood? Alignment, latch or hinge bolts? Are you using the stock hardware?
  8. 98blackbell
    I did all that. Ended up going diy megasquirt.
  9. 98blackbell
    Fantastic. Great build, if my son and I could find time to work on ours.
  10. 98blackbell
    Sorry Tony D! Thieves are the worse low lifes. My son (tooquick260 on here) had his first car stolen from our driveway, 1995 240sx wit out full coverage insurance. He worked McDs for 4 years to build it. S15 swap, 6 speed, a/c, body kit. Stolen at 3am Sunday 10/30/2010 morning (neighbors kid saw them) police found the car Monday night striped to the bone. We found the thieves but cops did nothing. Parts were spread out all over Florida! Now the Datsun is marked uniquely on all special parts real hard to disguise! We work to hard for this to happen, hope you have some justice.
  11. 98blackbell
    Like the setup. Tooquick and I are doing the same thing. We have all parts collected just need to take time to do the update! Well between my boat work and his work that is. He is planning to go road race tomorrow in Macon GA! First time out since the rod bearing issue at Znationals 2015.
  12. 98blackbell
    Yeah you up to cruising to Savannah? Cars and coffee Saturday Mornings? We will meet you with tha datsun and wife's g35 coupe?
  13. 98blackbell
    Looks great
  14. 98blackbell
    https://youtu.be/baDfCgJmjlk In memory of the ones we lost. Visited Ft McAllister in Richmond Hill GA.
  15. 98blackbell
    Moved battery to rear and used that space for coil pack, and 2 fuse blocks.
  16. 98blackbell
    Stole the kids car for the day. https://www.youtube.com/watch?v=NhujyXuK920
  17. 98blackbell
    New Snail! Hope we can hold boost without spiking.
  18. 98blackbell
    I have chopper wheel. $50 shipped. I have a couple ecus, let me look and make sure they are not burnt. Had the flash tuned.
  19. 98blackbell
    Ditto. Look at our build. Did the p90 head with z31 ecu. Then hurt the motor, rebuild with megasquirt. We thought we had 8.9 to 1 but really closer to 9.1, so little agressive. Went back with thicker head gasket. Good luck. The details are the devil or the devil is in the details. Have fun.
  20. 98blackbell
    Newhy rebuilt turbo on the way.
  21. 98blackbell
  22. 98blackbell
    I would start a new thread but keep a link in your signature. Good luck with new build , please keep us up to date.
  23. 98blackbell
    Looks good.
  24. 98blackbell
    I have a set of 850cc high impedance.
  25. 98blackbell
    Plans to go with new Garrett turbo with external waste gate to hold boost bettter. T3/T4e 50 trim should get to 400 hp. Don't want that much but would be nice to have a driveable 300-325 hp.
×
×
  • Create New...