[Blue z 89 2jz]

converting to electrical power steering for Prius 

 

[Blue z 89 2jz]

I have already started and pulled the motor and trans out.

 

[Blue z 89 2jz]

Hi forum,

I have z300 1989 with rb25det,I decided to swap 2jz. Found 2jzGE full built.

[Rb25 max psi]

with ps6266 you can run higher  psi than stock turbo 12psi. I think its ok to run 24psi with limited rpm to 7k because of weak oiling system.

[2jz out LS1 in]

Fill and restore the cracked dashboard and  interior parts also trying to replace broken ac with universal one.

Closed all firewall holes; ac pipes, heater pipes and ecu harness hole, and made one hole for all from battery tray side. And battery moved to rear side

 

 

 

 

[2jz out LS1 in]

Replaced the old clutch master cylinder with new OEM Nissan patrol one and made flange to make it fit 

 

[2jz out LS1 in]

Thanks for comments. I will make holes in shroud. There is a seal tape between shroud and rad to close the gap, also planning to  install one  12inch slim puller fan.

[2jz out LS1 in]

Installing 42 Row Engine Oil Cooler with AN10 Oil Filter Relocation Adapter

[2jz out LS1 in]

Installing radiator three rows and fabricating fan shroud for flex fan3000cfm

[2jz out LS1 in]

Stainless headers fabricated

 

[2jz out LS1 in]

[2jz out LS1 in]

adapter plate done and fit with gearbox

[2jz out LS1 in]

install  motor 

 

 

Making adaptor for rb20 gearbox

 

 

 

[2jz out LS1 in]

custom make engine mounts

 

[2jz out LS1 in]

exchanged with RB28 HKS

 

[2jz out LS1 in]

Engine and trans out ,clean and paint the bay

 

 

 

 

 

 

Fabricating custom oil pan with rear sump,  -10 AN fitting Oil Port Fitting for External Oil Filter, Depth: 6" at sump, 1 5/8" front half of pan also oil pickup extended  and modified.

 

[2jz out LS1 in]

Hey Forum

I would like to share my swap bought 300z with 2jz but always overheated and I cant drive for long distance

[2jz out LS1 in]

Fabricating custom oil pan with rear sump,  -10 AN fitting Oil Port Fitting for External Oil Filter, Depth: 6" at sump, 1 5/8" front half of pan, also oil pickup extended  and modified.

 

 

[2jz out LS1 in]

Engine and trans out ,clean and paint the bay

[2jz out LS1 in]

Hey Forum

I would like to share my swap bought 300z with 2jz but always overheated and I cant drive for long distance  

[Tachometer connection]

Hi everyone,

I have swapped rb20 into 280zx 1983turbo. The stock speedometer was straight forward mechanical outputs, but I don’t know how to modify stock tachometer to take a rb20 signal .

Any advice is appreciated as always

[280zx- rb20 Tachometer connection]

Hi everyone,

I have swapped rb20 into 280zx 1983turbo. The stock speedometer was straight forward mechanical outputs, but I don’t know how to modify stock tachometer to take a rb20 signal .

Any advice is appreciated as always 

[WHICH BRAKE BOOSTER]

I have upgraded my 240z brake booster with electrical vacuum pump, connected direct to brake booster, works great no issue  

 

 

[RB26 Front Sump Setup with Custom Crossmember]

I bought rb25 pan and modified it Check my building

 

http://forums.hybridz.org/topic/123114-golden-rb-240z/?do=findComment&comment=1151028

[RB26 Front Sump Setup with Custom Crossmember]

better to go with R33gts or s14 crossmember, approximately  2inch wider