Jump to content
HybridZ

frodriguezvsi

Members
  • Posts

    36
  • Joined

  • Last visited

Profile Information

  • Location
    pa

frodriguezvsi's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. the Turbo F54/P90 combo with Dish pistons will lower your compression which is best for turbocharging and Flat pistons will raise your compression and bad for turbocharging high boost.Every block/ head combo is going to need tweaking of the MS tune.
  2. Hi Grillhands, here is a good thread on dizzy lockout. http://forums.hybridz.org/topic/121378-280z-dizzy-lockout/
  3. Hi Nismo, you mention you are running Megasquirt for Fuel. How are you controlling the Ignition?
  4. looks awesome! also how about a cleanup site for the legacy products like MS2?
  5. I'm still learning the software or TunerStudio and Im using one of the sample programs in TunserStudio. Can you point me to were to check those settings or if you can send me a snapshot of it that will be great! thanks
  6. Hello, I have a MS2 with firmware 3.3.3 and Im trying to use the Stimulator V2 and I can get feedback from all the knobs CTL,Throttle, oxygen etc but cant get the RPM knob to provide me feedback to the gauge in TunerStudio.Do I need to set or configure any settings for the RPM knob in the Stimulator to work with TunerStudio. any help is appreciated
  7. sorry I gave it to a friend for a draw thru setup his working on
  8. Hi chipndip829, I'm going thru the same setup you had with the stock 280z dizzy. How do you ended up controlling the ignition.How did you wired it to the megasquirt? thanks for the info in advance
  9. yeah thats what I thought but i took a T3 flange and it matches up with the bolts but yeah dont know about the round whole.The guy at the flea market said something about a Draw thru setup for a carburetor datsun
  10. Hey All, I wanted to share this and maybe get a few ideas. I found this exhaust manifold for Z car at a flea market only pay $10 for it but it also had an adapter that seems someone made. I think the adapter is to fit a turbo to a stock manifold but not sure because of the round shape at the flange. Let me know what you all think.
  11. Are you still running your Knock sensor or took it off?
  12. can a knock sensor be added to an L28 engine and if its possible how can it be install. Do you need to tap a hole on the engine block?
  13. Where is the knock sensor located for a 78 datsun or does it even have one?
  14. hey you check my boy nismo_zxt he always got good parts http://forums.hybridz.org/topic/121307-1983-280zx-turbo-distributor-shaft/ frod
×
×
  • Create New...