z_boi

there is only one port for vacuum or boost. It comes out the side. this is the one i have.... http://216.242.145.16/products/product.phtml?p=10

I have an aeromotive A1000-6 FPR and a jsk fuel rail. My fuel pressure drops when i rev the engine. Is that supposed to happen? I also jus changed the pump to a higher flow bosch pump and it still does the same thing? ( pump flows 50gph which is about 190lph and 100 max psi ) whats stock pressure supposed to be? this if for a 78 280z.

wat about at night time? how does it light up?

Ok, i installed a cranecams XR3000 ignition kit and now my stock tach doesnt really work. has anyone else had this problem? anyway. to my question. Are the indash speedo and tachs the 5in ones? and wat about the volt/fuel and water guage sizes? Looking to get autometer guages.

Ok, so i know for a fact that the rear mounts on the 280 is definatly bigger that the 240 one. but when i looked at the fronts. they looked exactly the same. so your sayin that even tho they look the same. the 240 one will actually give me a lower height on the front?

haha...kool. thanks. i havent really had a problem with not having enough power.

ok.... Im kinda on a budget rite now. and in need of a new fuel pump. so heres my question... Is a 100 max psi 50gph (approximately 190lph) fuel pump is enought for 300rwhp? Im goin to be using it on my NA setup for now but plan on puttin it to use with my turbo setup once i get my hands on a turbo motor for a good price.

Wonder if anyones heard of it? I noe its made for heavy duty automatic turks. but can i use it in my tranny or lsd diff if i mix in solution wiht a thicker weight gear oil? has anyone every tried it? its supposed to help creat more friction so things work better. not sure about using it in the tranny but diffenately wanna try it in my LSD for my cressida.

u used the extra spring from the stock tb with the bracket. but i had to buy a longer bolt to make it fit. u can always add springs to make it as stiff as u want it to be.

kool..thanks. My tach worked fine untill i installed the xr3000 so it most likely is that problem.

anyone?????????

any one having problems with not enuff fuel flow from the stock pump, or are u guys running after market pumps. Wat kinda flow rate is the stock pump any way?

I installed a crane cam xr3000 on my 280 and now my tach doesnt work rite. its doesnt read untill i get it up to high rpms... How do i make the tach work on the system?

i've drifted my z b4 and it was on dry pavement. i had no problems. exept i had way too much toe out and would under steer sometimes...thats when the ebrake comes into play...hahhaha. my 280 has plenty power to drift. it countersteers pretty easily also.

thanks, i was jus tryin to make sure... tryin to cancel things out to pinpoint my problem.