Search the Community
Showing results for tags 'skillard'.
Found 2 results
3ftyZ posted a topic in Body Kits & PaintI need some help. I purchased a Skillard s30 splitter for type 1 air dam and can't seem to install it. Here's my combo: 73 240z MSA urethane air dam - http://www.thezstore.com/page/TZS/PROD/classic02a01b/50-1411 Skilard Splitter - https://skillard.com/products/240z-260z-280z-front-lip-splitter the problem? The bolts that should go into the core support aren't the right size The sway bar is in the way The biggest problem, the splitter wont even mount up flush onto the core support, its off by many inches The air dam appears to be way lower that those of the pictures I've seen, so when i pull up the splutter to the bottom of the air dam, it doesn't come up to the core support to allow it to mount up. One thing I know will get in my way - the previous owner hacked in some radiator supports that are lower than the stock core support - so I'll have to make some adjustment there. Does anyone have pictures of the core support and the mounting holes I should be using? Does this air dam even work with the splitter? Did i completely F it up by buying two incompatible parts? I'll try and take some pictures but without more hands it'll be hard to show the gap... Helps!!!
I am working on some #4 brushed stainless steel inner scuff plates for the 280Z. They are modeled after the the later 280Z plates but I also put them in a 76 that had the early 280Z scuff plates and they fit great. In the early 280Z's you may need to drill a few 1/8" holes for mounting is all. I will also offer the option to powder coat them black (they will still be the same stainless steel under the powder coat). I can also look at making them for the 240Z but I know that those are still available to purchase... If there is enough interest for the 240's to have stainless steel scuff plates I can do that too. I should have these up at skillard.com to pre-order this week and should have them ready to ship early January. The price point isn't finalized yet but it's looking like $80 for a set of 2 with stainless mounting screws. Add $10 for powder coating.