Jump to content
HybridZ

260z filler neck


David GArcia

Recommended Posts

As many of you may know the carburated 260z gas tank has a vapor tank that goes inside the cabin tucked in behind a body panel by the hatch. Since I am switching to EFI i have decided to remove the vapor tank but I am left with a dilemma since the filler hose has an opening that was meant for the vapor tank. Do i cap it? and how or, Is the a filler neck that could be used instead of that one. Thanks

Link to comment
Share on other sites

The tank requires two vents. One while filling and one while running. You'll just hate trying to fill your tank without hooking that vent line at the filler neck to the tank, and the tank will collapse as it empties without a vent to somewhere while running. Study the FSM's and you'll see how it works. There is a great thread on here someplace that fully explains methods to remove the vapor canister but keep venting.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...