OZZ240 Posted July 4, 2012 Share Posted July 4, 2012 My project car is a 240Z and with a VG30ET engine transplanted out of a 1986 Z31, If anyone could let me know what the stock rev limit is for the VG30ET and is it possible to increase the rev limited safely, if so what can I set the new rev limit to?. Modifications to engine: Stock engine Aftermarket ECU which would more than likely be a Haltech Platinum Sport 1000 Upgraded injectors 650cc and fuel rails to suit (future proofing for later upgrades) Stock Turbo Stock Boost level at this time but looking to possible increase boost level max of 14psi this increase would be a future upgrade. Quote Link to comment Share on other sites More sharing options...
BLOZ UP Posted July 4, 2012 Share Posted July 4, 2012 6500 from the factory. People have run them to 7000. A significant amount of those people also spun rod bearings. I set mine to 6000 and don't plan on increasing it. The VGE dies off after 5500 anyway. Quote Link to comment Share on other sites More sharing options...
OZZ240 Posted July 4, 2012 Author Share Posted July 4, 2012 Thanks for the info Quote Link to comment Share on other sites More sharing options...
BLOZ UP Posted July 4, 2012 Share Posted July 4, 2012 Also, keep in mind that better springs are needed for more than 6500, so the word is. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.