Jump to content


Photo
- - - - -

Group Buy on SpeedHut Gauges


  • Please log in to reply
283 replies to this topic

#261 jjwongx27

jjwongx27
  • LocationCentral California

Posted 06 December 2016 - 12:03 AM

How much can you do on speed hit gauges

6 GAUGE CUSTOM KIT
GPS Speedometer 200mph, Tachometer 10K RPM Shift-light, Oil Pressure Gauge 100 psi, Water Temp Gauge 120-260F, Fuel Level Gauge, Volt Gauge 0-18V
Except I don't need volt gauge. If I can swap it out for an a/f ratio one

http://www.speedhut.....i?clid=5572651

#262 ihiryu

ihiryu
  • LocationKilleen, TX

Posted 07 December 2016 - 10:59 AM

Could you send me a message with the part numbers

 

Thanks,

Steve


Contact me for cheap prices on speedhut gauges, many, many, other things

http://tinyurl.com/SpeedHut-Group-Buy

If we've done business and you were satisfied, a simple "Like" on our facebook page would be all the "thanks" I'd need!

https://www.facebook.com/KRMotorsports


#263 260DET

260DET
  • LocationWarwick, Q, Australia

Posted 15 December 2016 - 10:53 PM

Do you do overseas orders without charging $50 shipping for a couple of gauges? Should be, what, $20? 



#264 ihiryu

ihiryu
  • LocationKilleen, TX

Posted 19 December 2016 - 01:46 PM

Sorry the shipping is from Speedhut, I don't bloat any fees.  


Contact me for cheap prices on speedhut gauges, many, many, other things

http://tinyurl.com/SpeedHut-Group-Buy

If we've done business and you were satisfied, a simple "Like" on our facebook page would be all the "thanks" I'd need!

https://www.facebook.com/KRMotorsports


#265 ihiryu

ihiryu
  • LocationKilleen, TX

Posted 22 December 2016 - 12:01 PM

Got some good news!  I have a friend of mine who has been building these!  These are made for the Z cars, to fit the Speedhut gauges, The use 4" for the two main gauges, and are specific to the speedhut, the smaller gauges use 2 5/8 but are not tailored to the Speedhut, but will definitely work.  

 

 

https://www.dropbox....124453.jpg?dl=0

https://www.dropbox....124500.jpg?dl=0

https://www.dropbox....124508.jpg?dl=0

https://www.dropbox....124512.jpg?dl=0

https://www.dropbox....125031.jpg?dl=0


Edited by ihiryu, 22 December 2016 - 12:18 PM.

Contact me for cheap prices on speedhut gauges, many, many, other things

http://tinyurl.com/SpeedHut-Group-Buy

If we've done business and you were satisfied, a simple "Like" on our facebook page would be all the "thanks" I'd need!

https://www.facebook.com/KRMotorsports


#266 tim.d

tim.d
  • LocationCharlotte, NC

Posted 22 December 2016 - 12:06 PM

Man i wish their clocks had illuminated dials.



#267 Yoak

Yoak
  • LocationCA/WV

Posted 04 January 2017 - 01:30 PM

Tried to send you a message but it says you can't accept any new ones right now. If you can send me a PM :)


--------------------
1979 Datsun 280ZXR
1973 Datsun 240Z
www.doitinadatsun.com

#268 TimZ

TimZ
  • LocationDearborn, MI

Posted 05 January 2017 - 05:56 AM

Got some good news!  I have a friend of mine who has been building these!  These are made for the Z cars, to fit the Speedhut gauges, The use 4" for the two main gauges, and are specific to the speedhut, the smaller gauges use 2 5/8 but are not tailored to the Speedhut, but will definitely work.  

 

 

https://www.dropbox....124453.jpg?dl=0

https://www.dropbox....124500.jpg?dl=0

https://www.dropbox....124508.jpg?dl=0

https://www.dropbox....124512.jpg?dl=0

https://www.dropbox....125031.jpg?dl=0

 

Sorry - slightly off topic but that tach appears to have check engine and brake warning lights - I didn't see an option for this (still don't) when I ordered mine, or I would have ordered it that way.  Was that tach supplied like that or was it modded later?


Posted Image

Information is not knowledge
Knowledge is not wisdom
Wisdom is not truth
-FZ, Joe's Garage

#269 ihiryu

ihiryu
  • LocationKilleen, TX

Posted 05 January 2017 - 09:06 AM

Yes, you can add that now as an option.  I believe it's an additional 10 per LED.  We weren't able to do that a year ago.  


Contact me for cheap prices on speedhut gauges, many, many, other things

http://tinyurl.com/SpeedHut-Group-Buy

If we've done business and you were satisfied, a simple "Like" on our facebook page would be all the "thanks" I'd need!

https://www.facebook.com/KRMotorsports


#270 ihiryu

ihiryu
  • LocationKilleen, TX

Posted 05 January 2017 - 09:08 AM

Tried to send you a message but it says you can't accept any new ones right now. If you can send me a PM :)

 

I got your email, but I also cleared my inbox.  Thanks!


Contact me for cheap prices on speedhut gauges, many, many, other things

http://tinyurl.com/SpeedHut-Group-Buy

If we've done business and you were satisfied, a simple "Like" on our facebook page would be all the "thanks" I'd need!

https://www.facebook.com/KRMotorsports


#271 TimZ

TimZ
  • LocationDearborn, MI

Posted 05 January 2017 - 10:18 AM

Yes, you can add that now as an option.  I believe it's an additional 10 per LED.  We weren't able to do that a year ago.  

I just received mine a couple of weeks ago.  I don't see any way to select such an option on their website.  I probably already know the answer, but is there any way to retrofit or send it back for mods for a fee?

 

EDIT:  I just spoke with Speedhut, and they gave me an RMA to add in the two lights, so that was easier than I expected!


Edited by TimZ, 05 January 2017 - 10:37 AM.

Posted Image

Information is not knowledge
Knowledge is not wisdom
Wisdom is not truth
-FZ, Joe's Garage

#272 ihiryu

ihiryu
  • LocationKilleen, TX

Posted 05 January 2017 - 11:33 AM

I just received mine a couple of weeks ago.  I don't see any way to select such an option on their website.  I probably already know the answer, but is there any way to retrofit or send it back for mods for a fee?

 

EDIT:  I just spoke with Speedhut, and they gave me an RMA to add in the two lights, so that was easier than I expected!

 

Sounds good!  SPeedhut has exceptional customer service!  It's on their website, it's something you have to tell them.


Contact me for cheap prices on speedhut gauges, many, many, other things

http://tinyurl.com/SpeedHut-Group-Buy

If we've done business and you were satisfied, a simple "Like" on our facebook page would be all the "thanks" I'd need!

https://www.facebook.com/KRMotorsports


#273 RB26powered74zcar

RB26powered74zcar
  • LocationLake Charles, Louisiana, 70605

Posted 05 January 2017 - 03:26 PM

Awesome, can't wait for mine to get made....
TimZ, do you have any pics showing your dash with the speed hut gauges installed?

.

 

 

 

 

 

RB26dettZ pics

 

th_April_2012006.jpg ®


#274 ihiryu

ihiryu
  • LocationKilleen, TX

Posted 05 January 2017 - 03:57 PM

Awesome, can't wait for mine to get made....
TimZ, do you have any pics showing your dash with the speed hut gauges installed?

 

Speaking of which, yours is about a week out!


Contact me for cheap prices on speedhut gauges, many, many, other things

http://tinyurl.com/SpeedHut-Group-Buy

If we've done business and you were satisfied, a simple "Like" on our facebook page would be all the "thanks" I'd need!

https://www.facebook.com/KRMotorsports


#275 TimZ

TimZ
  • LocationDearborn, MI

Posted 05 January 2017 - 07:10 PM

Awesome, can't wait for mine to get made....
TimZ, do you have any pics showing your dash with the speed hut gauges installed?

No, I don't have them installed yet - just sent the tach back to add the engine and brake warning lights

 

Here's a few of the Speedo mounted in the stock gauge housing:

20170105 221405
20170105 221416
20170105 221500
 
... I just had to file down the ribs on the retaining ring until it was a snug fit in the gauge pod, then I drilled three small pilot holes around the periphery where the ribs were contacting the pod and added three small screws to hold everything in place.  Couldn't have asked for a better fit!

Edited by TimZ, 05 January 2017 - 07:26 PM.

Posted Image

Information is not knowledge
Knowledge is not wisdom
Wisdom is not truth
-FZ, Joe's Garage

#276 RB26powered74zcar

RB26powered74zcar
  • LocationLake Charles, Louisiana, 70605

Posted 06 January 2017 - 06:42 AM

 

No, I don't have them installed yet - just sent the tach back to add the engine and brake warning lights

 

Here's a few of the Speedo mounted in the stock gauge housing:

 
 
 
 
... I just had to file down the ribs on the retaining ring until it was a snug fit in the gauge pod, then I drilled three small pilot holes around the periphery where the ribs were contacting the pod and added three small screws to hold everything in place.  Couldn't have asked for a better fit!

 

 

Yea Tim, those are going to look nice in your Z.

 

I could swear I saw some nice azz gauges in you car before. Blacked out and very colorful when on.  Am I mistaking? 


.

 

 

 

 

 

RB26dettZ pics

 

th_April_2012006.jpg ®


#277 ihiryu

ihiryu
  • LocationKilleen, TX

Posted 06 January 2017 - 09:36 AM

A friend of mine makes a drop in style for the SH gauges, I posted it a few post back.


Contact me for cheap prices on speedhut gauges, many, many, other things

http://tinyurl.com/SpeedHut-Group-Buy

If we've done business and you were satisfied, a simple "Like" on our facebook page would be all the "thanks" I'd need!

https://www.facebook.com/KRMotorsports


#278 TimZ

TimZ
  • LocationDearborn, MI

Posted 06 January 2017 - 09:38 AM

Yea Tim, those are going to look nice in your Z.

 

I could swear I saw some nice azz gauges in you car before. Blacked out and very colorful when on.  Am I mistaking? 

No, you are correct- I have the full set of Defi 60mm black facegauges, but not the tach, and they don't make a speedo.  The Defi tach that works with my setup has been discontinued, so I went with the Speedhut speedo and tach so they would match.  

My winter project started out as trying figure out how to put a T56 Magnum in, so it looked like I needed an electronic speedo, and it just kind of ballooned from there (like it always does :mrgreen: )...


Edited by TimZ, 06 January 2017 - 09:39 AM.

Posted Image

Information is not knowledge
Knowledge is not wisdom
Wisdom is not truth
-FZ, Joe's Garage

#279 RB26powered74zcar

RB26powered74zcar
  • LocationLake Charles, Louisiana, 70605

Posted 06 January 2017 - 08:00 PM

Sounds great Tim. I will attempt to follow your lead with a T56. I really wanted to put a cd009 350z trans with my RB26, but nobody seems to have done it yet and tell how they did it.

.

 

 

 

 

 

RB26dettZ pics

 

th_April_2012006.jpg ®


#280 ihiryu

ihiryu
  • LocationKilleen, TX

Posted 08 January 2017 - 04:55 PM

I've done a few CD009 on a few other cars but not a S30. I would imagine it being really, really tight in the trans tunnel. And the no speed sensor thing kinda sucks too

Contact me for cheap prices on speedhut gauges, many, many, other things

http://tinyurl.com/SpeedHut-Group-Buy

If we've done business and you were satisfied, a simple "Like" on our facebook page would be all the "thanks" I'd need!

https://www.facebook.com/KRMotorsports





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users