Jump to content
HybridZ

After market fuel rail


joelrs7

Recommended Posts

Hey guys. I bought a 2 foot fuel rail stick from jegs i'm going to custom make. I have a pretty good idea on what I need to do, however; I wanted some insight from someone who has done it. I plan on cutting it to proper length, drilling and tapping holes for all of the barbs, and was wondering what I should use to seal off the barbs from leaking and can withstand gas. Liquid teflon? o rings? Thanks. P.S its for a L28ET

Link to comment
Share on other sites

I've used teflon tape with some success, but after recent trouble I used a Permatex thread sealant and that worked better than anything else I've tried. One good piece of advice I got was make sure the threads are clean, and do not over-tighten them.

Edited by SleeperZ
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...