Jump to content
HybridZ

Any one have a pic of a vg exhaust cam?


stony

Recommended Posts

Specifically the Cas sensor drive gear. I need to see how it is oriented in the cam. Below is how the gear is oreinted in a RB cam. Notice if the dowl was at 12 oclock the half moon would be pointing to 3 oclock.

 

I need to know if the vg is the same or if the half moon points to 9 oclock.

 

Cam_Install_16.JPG

Link to comment
Share on other sites

Cas sensor drive gear. its the little gear that is pressed into the cam that engages the cas sensor when its installed. In teh pic above you can see it on the right (exhuast) cam. it has a little half moon key way. When the half moon break you can pull the gear out and press another one in. It has to be clock a certain way so you timeing is correct and i want to verify is the VG gear is teh same as the Rb gear. I installed mine with the instruction provided from jim wolf. but my timing is not 180 Degrees out. So either the VG and RB drive gears are opposite each other or the instructions provided were wrong. I was told over the phone by a jim wolf tech they are the same.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...