Jump to content
HybridZ

Ignition Wiring question


Recommended Posts

So somewhere along the life of my s130, someone lost the keys. The ignition switch is messed up now from a PO using a screw driver to turn it to the on position, and there is a flip switch for the starter. Anyways, i bought a universal ignition switch from autozone, i tried to wire it up but just couldn't seem to get it. The blue plug that plugs into the original ignition, i found the battery wireand the starter wires, but can't seem to get it to where when the key is in the on position or acc to get anything to happen. Just wondering if anyone else installed one before and could help me in doing mine. I need the wiring diagram for the ignition. I looked in the FSM but it wasn't any help. Thanks again! I would really like to be able to use a key instead of a screw driver and flip switch -_-

Link to comment
Share on other sites

It still has the original ignition switch in it. Just no keys. The part i got from AZ is just a 10$ universal starter/ ignition switch, i Can't seem to find it On the website. I'll post pics when i get home from work. Btw, it's a 1983 280zx. The one i bought has 4 contacts on it. Battery, accessory, starter, and ignition. The stock blue plug has 5 wires, the bottom right(yellow) is for battery, and bottom left (white/ blue i think) is fur the starter. I tried every combination for the other ones but can't seem to get it. Thanks for your help guys!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...