Jump to content
HybridZ

Recommended Posts

I just dug through your whole build here again and absolutely love this car. Just wanted your feedback on the inter cooler and radiator you purchased from Pro Alloy. They appear to be a top notch outfit with quality custom parts. I am shooting for very similar power figures from my 2jzgte swap and that inter cooler looks ideal. 

Share this post


Link to post
Share on other sites

Thanks

 

The fuel tank, radiator and intercooler are all custom builds from Pro Alloy and I've just received a radiator expansion tank from them, everything they've made for me has been top quality, great craftsmanship and works really well. I couldn't be happier with their stuff. Because its all built to my specs it means everything fits perfectly and looks like its meant to be there instead of just going with generic parts which can look out of place. The inter cooler is working great, it could easily handle another 200hp and still provide sufficient cooling. They are not cheap however for the quality of their parts/work I don't think its bad and its true you get what you pay for.

Share this post


Link to post
Share on other sites

I wasn't happy with my stamped engine plaque so I got one fully custom made by laser engraving:

 

DSCF9394.jpg

 

 

 

 

Looks way better:

 

DSCF9407.jpg

 

 

 

 

 

Got a new mascot:

 

DSCF9389.jpg

 

 

 

 

 

Got my plastic tail light chrome trim surrounds re-chromed, they aren't perfect but much better than what was there, I've got 2 spare sets now so I'll send the best away to a different company and hope I get a better job.

 

DSCF9420.jpg

 

 

 

 

 

I was hating my rusty rear bumper bolts, so I've changed them to titanium ones, 12g vs 32g, only saved 80 grams overall, but hey, I guess every little helps, if I changed every bolt on the car to titanium I'm sure it would save a couple of kg, but I'm not a millionaire so that won't be happening.

 

DSCF9423.jpg

 

 

DSCF9426.jpg

 

 

 

 

 

I'd been running Hawk HP+ pads which were working great, but they were very dusty and it was destroying my wheels so I've changed my pads to Pagid RS29's, so far they seem just as good, they are still dusty but not as bad as the Hawks and the dust seems less corrosive.

 

DSCF9428.jpg

 

 

 

 

 

I found a nice model of an S30, even has a similar intercooler to mine:

 

DSCF9437.jpg

 

DSCF9431.jpg

 

 

 

 

 

Tail light panel was looking a bit tired so time for a refresh:

 

DSCF9449.jpg

 

 

DSCF9452.jpg

 

 

DSCF9457.jpg

 

 

DSCF9464.jpg

Share this post


Link to post
Share on other sites

I'm lucky to have some great driving roads where I live.

 

12031634_945599085505802_316107624062569

 

 

 

 

 

Won car of the show at a recent show:

 

IMG_0348.jpg

 

 

 

 

 

Changed the location of my front plate:

 

IMG_0426.jpg

 

 

 

 

 

I got an external mic for my GoPro so I tried it out, it was too close to the exhaust so once its hard on boost I was getting some distortion, next time I'll have it further from the exhaust:

 

Low Boost Run:

 

 

 

 

Took her to the drift track but it turns out my sump baffling isn't adequate and I was experiencing starvation about 1/4 way through the corners so I called it day but through a few circles first:

 

 

 

 

 

 

I've made plans to upgrade my baffling massively and will be suing these rubber flaps:

 

DSCF9545.jpg

 

 

 

 

 

I removed my bumpers for re-chroming and I quite like the bumper-less look at the rear:

 

DSCF9605.jpg

 

 

 

 

I've got a new stroage location for my cars so I can keep them both in air chambers:

 

IMG_0442.jpg

 

 

 

 

I received my custom overflow tank from Pro Alloy:

 

Tank%2011.jpg

 

Tank%2013.jpg

 

 

 

 

Planning a few things, will be upgrading to adjustable rear arms soon, oil sump upgrade, get boost by gear working for first gear takeoff. I'm also looking to run wider rear wheels, I'm thinking I can run 8.5" wheels with 245 tyres and I'm looking to use Watanabe wheels and will be taking he extra space from the inside, will end up close to the coilover but should be do-able.

Share this post


Link to post
Share on other sites
18 hours ago, torynich said:

What brand are your front air dam and rear wing?

Not sure on exact brand, but they both came from MSA and I am happy with both of them if you are thinking about them. 

 

 

 

 

17 hours ago, boosted300 said:

Wow, some really juicy content here...

 

Absolutely gorgeous build brother, way to go!

Thank-you very much fellow RB-Z brother.

 

 

 

 

Hope to get this thread updated this week.

Share this post


Link to post
Share on other sites

Thanks.

 

 

14 minutes ago, primaz said:

I thought that 260's were only in 1974?  I thought that the year yours is a 1978 isn't that a 280 not a 260Z?

Only in America.

 

In the UK we got the 260Z up to 78 (actuallty after 78 but they stopped making them in 78, I think the last were sold in 79 which is when mine was bought), because we didn't have all the power sapping emissions shit on the L26 it made around 160hp so we never needed a 280Z which was not released here.

Share this post


Link to post
Share on other sites
Posted (edited)

Just a few updates since I've not added anything here in a while.

 

 

My Custom Blueprint, ordered this in A3 size but it was so nice I had to order another in size A2, good news is I can now have one in my hall and one in my Garage. Plan to get one for my Civic also so I can have them on the garage wall behind where the cars live.

 

DSCF9891.jpg

 

 

 

 

Changed some rubbers

 

DSCF9895.jpg

 

 

 

 

 

Overflow tank fits perfectly:

 

DSCF9918.jpg

 

 

DSCF9916.jpg

 

 

 

 

Received some lovely parts from T3:

 

DSCF9886.jpg

 

 

 

DSCF9905.jpg

 

 

DSCF9898.jpg

 

 

 

 

Unfortunately the hubs won't fit without spacers

 

Hub%20in%20wheel.jpg

 

 

 

 

 

Fitted them to find they leave the disc sitting about 8mm further out than the stock hubs so I had to remove them again. T3 have now sent me a spacer which should leave the discs sitting correctly. Not sure if I will use them yet though as its seems that almost no wheels will fit them without a spacer, does anybody know if they will fit Watanabes?

 

DSC00611.jpg

 

 

 

DSC00613.jpg

 

 

 

DSC00623.jpg

 

 

 

 

T3 sent the spacers to me, I had asked for new bearings also because I had to fit the first new set back into my old hubs, I had expected to pay for these but they sent everything for free, I'm always happy with their customer service, top quality parts and great customer service. 

IMG_3119.jpg

 

 

 

Working on a carbon fibre splitter

 

DSCF9976.jpg

 

 

 

 

Got myself a VBOX, yet to try it out properly but will post results once I have.

 

DSCF9938.jpg

 

 

 

 

 

 

I decided my washer bottle was letting my bay down, so I decided to have a nicer one made to my specs:

 

DSCF9907.jpg

 

 

 

 

It wasn't cheap but its a work of engineering art and respect of the skill levels required to make it:

 

IMG_3120.jpg

 

 

 

IMG_3223.jpg

 

 

 

IMG_3218.jpg

 

 

 

 

 

 

 

Upgraded my carbon wrapped taillight panels to real ones, didn't want the shiny look so went for satin finish. They look good but the mounting tabs for the lights are really really weak and half broke off so I am thinking I am planning to real carbon skin my stock ones if I can't repair the tabs with some Sikaflex.

 

 DSCF9936.jpg

 

 

 

 

 

 

 

Edited by EF Ian

Share this post


Link to post
Share on other sites

Some random Photos:

 

 

26374501675_35900b4e3d_h.jpg

 

 

 

 

 

 

P1150425.jpg

 

 

 

 

 

 

DSC_0306.jpg

 

 

 

 

 

 

12957610_1149991398384834_79545683576554

 

 

 

 

 

Some interior shots courtesy of Speedhunters: 

 

2015-Datsun-260Z-RB26-Ian-Cormack-by-Pad

 

 

 

 

 

2015-Datsun-260Z-RB26-Ian-Cormack-by-Pad

 

 

 

 

 

Had a great day driving about with some mates in out jap cars, shooting some video. https://www.youtube.com/watch?v=xKPQeYRkjYU

 

 

13000272_1053625591369817_91696339903811

 

 

 

 

 

 

13043294_1053625334703176_26620614118248

 

 

 

 

 

 

 

 

Share this post


Link to post
Share on other sites
Posted (edited)

Then this happened. :(

 

 

Someone old lady pulled out in front of me in a 60mph limit, I had no chance of stopping in time. Then she claimed it was my fault later on, I didn't want to loose my no claims and wanted the car repaired properly so I took her to court and Won of course, but it took over a year since the accident. 

 

IMG_1295.jpg

 

 

 

IMG_1298.jpg

 

 

 

IMG_1300.jpg

 

Its not that bad but still is about £10,000 of damage, the airdam, bumper, bonnet, headlight bucket, headlight case, headlight, headlight cover, wing, indicator front, indicator side, grill, diffuser plate and two wheels where they touched the kerb are all damaged, as is part of the inner panel meaning the engine will have to be removed to straighten and repair.

 

 

 

So, the car hasn't been on the road in over a year,  between breaking my fibula and tibia wakeboarding to getting my first house and my Job commitments I just haven't had time.

 

IMG_3215.jpg

 

 

 

 

 

In good news however I bought my first house, and it has the all important triple garage, so I now have somewhere to store and work on my cars. That was the main reason for going with this house tbh, petrol head prioritys. 

 

IMG_7924.jpg

 

 

 

 

IMG_7447.jpg

 

 

 

 

The garage isn't much inside at the moment, but I have big plans for it, once the Datsun is sorted again it will be my next project before I can start another car project. Plan to extend the two right side bays longer to allow room for cabinets and benches with room to work on a car all round while it is on a scissor lift which will be recessed into the floor. Walls will be painted, floor will be tiled, insulation added to the roof, the two left bays will get a loft for storage and I'll fit flat led lighting panels recessed into the ceiling throughout.

 

IMG_7042.jpg

 

 

 

 

 

Got most of the parts needed to fix the Datsun now, I decided I would try and cut some weight

 

So I got Marugen Shoukai FRP wings, amazing quality and only weigh 2.15kg each.

 

IMG_3188.jpg

 

 

 

 

IMG_3187.jpg

 

 

 

 

IMG_3185.jpg

 

 

 

IMG_8383.jpg

 

 

 

 

 

I wanted a carbon fibre Bonnet, but nearly all available are actually fibreglass with a cosmetic skin of carbon. I wanted full dry carbon. Only two options I could see were Topstage Composites and Restored.JP. I went for the restored one, it weighs 5.7kg.

 

IMG_3407.jpg

 

 

 

 

IMG_3404.jpg

 

 

 

 

 

IMG_3403.jpg

 

 

Inside will stay carbon, topside will be body colour.

 

 

 

 

Skillard full length grill

 

IMG_3219.jpg

 

 

 

 

 

 

I decided recently that I would go all out, so the whole car is going back to bare metal, only rust is a few spots in the floor plans, this will be repaired along with some more seam welding in the rear, some minor mods in the engine bay and I will be extending the frame rails to join the rear sub-frame. Currently trying to decide if I want to add a half cage or not.

 

 

Stripping in progress. The sound deadening was a pain to remove, even with dry ice.

 

 IMG_8176.jpg

 

 

 

DSCF0178.jpg

 

I plan to re make the interior wiring while building her up again. Work should be commencing when I am on leave in July. So can't wait to drive her again.

 

 

 

 

My sump needs better baffling and the flange isn't flat so I plan to either start from scratch or cut off the flange and re make the current one with a new flange, wings and an improved trap door setup. This will be done while the engine is out the car for the body work.

 

Got some RB26 flanges ready to go.

 

IMG_8873.jpg

Edited by EF Ian

Share this post


Link to post
Share on other sites

Wow...thats quite an update! 

 

So much to absorb...

 

Awesome washer bottle...

 

I got sick to my stomach seeing the damage to your car...

 

But most importantly...congratulations on your house! That's a tremendous milestone! 

Share this post


Link to post
Share on other sites
10 hours ago, boosted300 said:

Wow...thats quite an update! 

 

So much to absorb...

 

Awesome washer bottle..

Thanks.

 

 

 

 

10 hours ago, boosted300 said:

I got sick to my stomach seeing the damage to your car...

Not as sick as I felt I'm sure. I was meant to be heading to the Biggest Jap car show in the UK the next day and I'd got a space on the Top 20 arena, so gutted I didn't make it, had the ferry and B&B's booked and a friend arranged to come other with me, properly gutting.

 

 

 

 

 

10 hours ago, boosted300 said:

But most importantly...congratulations on your house! That's a tremendous milestone! 

Thanks, its nice to have your own place, and I'm super happy to now have somewhere my own to work on the cars inside, no more lying on wet ground in the rain for me.

 

 

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×