Jump to content
HybridZ

My $650 budget s130 build


OldAndyAndTheSea

Recommended Posts

Currently, I am living in Bristol, Rhode Island until March to become a composites technician. So I will preface this whole build with a disclaimer that states: I will only be able to work on the car(s) every third week or so, for about a day. So progress will be slow. But, I'll be making carbon pieces and projects for the cars while I am here, and will update accordingly.


and yeah...... I know....The LAST thing I need is ANOTHER Z car, but I promise you this one solves a couple of problems I have been facing.

I'll explain...

A little back story to get you familiarized. I own a 240z a 260z and a 280zx. The 240 is the project car some of you have seen, my 260 is a running driving future gift for my brother, and my 280zx is unfortunately non moving, non operational.

But currently it just sits in my driveway, as most of its good turbo parts were robbed to aid my N/A --> turbo conversion build on my 240. The other problems with the 280zx are the facts that it is an automatic, has some pretty rotten floors, and needs rear end work,  despite what a respray may lead you to believe.



So what's a guy supposed to do?

On one of my last nights in New York, I was curious and just decided to pop on craigslist to see if anything interesting was in the area. Lo and behold, a 1983 Datsun 280zx turbo, 5 speed. runs. drives. body is rough (but I'm a body guy, plus you'll see it doesn't really matter)

Taking any reasonable offer. Title in hand. "I don't know much about the vehicle"

Jackpot!!!







The car is pretty rusty. But luckily most of it is what I call "crispy on the edges" due to a stupid factory two tone decal that loves to trap moisture and subsequently rust. But lucky for me, I own a pretty much worthless 280zx that is not doing anything other than sitting in my driveway. So I have a donor car.

I got this rusty piece of shiz for 650 dollars. But OH MY LAWD, does it run and drive well...I wouldn't have ANY hesitation daily driving it...Which is actually my plan for spring :)

photobucket-28559-1378764353113_zpsff8eb

photobucket-53264-1378764371994_zps54430

photobucket-23023-1378764392609_zpsb22fd

photobucket-36200-1378764402827_zps71dfb

photobucket-50127-1378764418049_zps6639e

photobucket-43151-1378764437977_zps86192

photobucket-25151-1378764450938_zpsad847

photobucket-6843-1378764495027_zps9f5e3e

photobucket-56703-1378764477088_zpsfbd1d

photobucket-48079-1378764462252_zpsb2900




And here's my NOW donor car.

photobucket-1700-1336518743444.jpg

Let the surgery begin. The following was only 1 day of work. That's all I've been able to do. The timing with purchasing this car and going to Rhode Island couldn't have been worse..Talk about blue balls......


photobucket-45346-1378764510043_zpsd7cdc



The ole Switch-a-roo.

photobucket-46660-1378764533940_zps569d1

photobucket-33725-1378764546280_zpse6488

photobucket-55041-1378764563406_zpsc4bdc

photobucket-60246-1378764576677_zps3ad9a


So my plan is to take the best parts of both my 280zxs and make one surprisingly nice daily driver until I properly finish my 240z. As always, all work will be done in house, by me, and unless listed, all parts used are already owned, so no expense occurs. I'm trying to keep this car as low cost, and make it as ridiculously nice as possible. I know I can do it.

 This is the starting point. I have a lot of high hopes for this one.


And finally here's an exhaust clip (ignore the door ajar bell). There is a comically awful restriction (bend) in the pipe, and it still doesn't sound too bad in my opinion. I'm very excited to make a nice full welded 3 inch exhaust. That's one of the first micro projects. But until then.

http://s524.photobucket.com/user/twofortyz/media/photobucket-51276-1378767778162_zps556a4081.mp4.html

Edited by OldAndyAndTheSea
Link to comment
Share on other sites

  • Replies 114
  • Created
  • Last Reply

Top Posters In This Topic

A lot of body work ahead of you , talking about rust  . I guess it's not as bad as the donor car . Good luck on your project . And I'll take center light panel if you don't need it . :-D .

 

Yeah, there's definitely a whole lot of metal work in my future, but at least the floors are there, and the surrounding gasket areas are all very solid, which were trash on the auto zx. "Most" of the rust is merely cosmetic. haha.

 

And that center panel was like icing on the cake. I'm definitely going to utilize it, at least in the meantime. Too cool to pass up. Thanks for the encouragement :)

Edited by OldAndyAndTheSea
Link to comment
Share on other sites

  • 2 weeks later...

Okay. Got to work on the car for a day this weekend.

Made some progress. With projects like this, you have to take it one panel at a time. It's easy to become discouraged when one looks at the project as a whole.

So I started off deleting the OEM air cleaner, and added the intake that I used on my 240 when it was N/A. It'll work for now.

I swapped wheels and tires.

Then I started working on the tail light panel. Cut out the rust, and welded in some patches, thus beginning the adventure. I'll try to complete a section every time I return home.


Total Work Days: 2

Money spent on parts: $13 (silicone coupler for my intake)

Total cost of project thus far: $663





Here are some pictures.

OEM cold air intake

photobucket-1065-1379911683580_zpse3d062

photobucket-39993-1379911652895_zpscaf05


Wheels

photobucket-52349-1379853776027_zps836a4


photobucket-30240-1379853750095_zpsebc5d



photobucket-51386-1379853804851_zps1d6fc

photobucket-47503-1379853846313_zpsa61bb

photobucket-55040-1379853864152_zps25705

photobucket-46664-1379891765250_zps950b6

photobucket-53814-1379891786717_zpscfa5e

photobucket-52210-1379891808084_zpsb6b69

It's a start....More to come.

Link to comment
Share on other sites

  • 2 weeks later...

Work continued this weekend.

Got a couple of things done.



Swapped out the door internals, and wiring so I once again have power windows, and mirrors.

- Video showing some nasty window up and downage:

http://s524.photobucket.com/user/twofortyz/media/photobucket-1468-1380557511076_zpsddb33352.mp4.html

- Roughly cleaned and swapped the door panels.

photobucket-36198-1380669521492_zpsd4e2a

photobucket-46995-1380669493353_zps0304f

photobucket-60159-1380669461953_zpsf3f9b

photobucket-53215-1380669549236_zpsb26b3

photobucket-52656-1380669753655_zps59817

 - Swapped to my better seats. I think the blue and brown/tan look fantastic together; fortuitous circumstances.

photobucket-51363-1380557387798_zpse7304

- Test fit the optional rear panel.
photobucket-47479-1380557597955_zps15c41

Oh, and I did a little body work. Some of the easier stuff. I'll come back and tackle the time consuming areas when I have more than an hour or so to work. Gotta refill my 75/25 bottle too. There's a bunch of welding in my future. I don't mind. I love me some sparks. :)

photobucket-66968-1380557375208_zps3314e

photobucket-35631-1380557362922_zps4788b

photobucket-46042-1380557345883_zps338dc

photobucket-60160-1380557298976_zpsa432b

photobucket-62941-1380557313529_zps6fba5


It's looking better. Til next time, I'll be busy getting itchy playing with composites here in Rhode Island.

photobucket-46857-1380669438560_zps1ca13

 

Total days worked so far: 3

 

Money spent this week: $0

 

Total money spent on project so far: $663

Edited by OldAndyAndTheSea
Link to comment
Share on other sites

  • 2 weeks later...

Okay, made a little progress this last weekend.

Spark notes:

-Swapped rear hatches
-Pulled rear bumpers
-Began cutting out the cancer under rear bumper area
-Continued more of the simple body work

Barrage of pictures.

photobucket-41471-1381774640886_zpsffda3

photobucket-55900-1381774855041_zps2662c

photobucket-61615-1381774871993_zpsca9b7

photobucket-66967-1381774665496_zpsf671f

photobucket-24456-1381774807141_zpse5bd6

photobucket-37401-1381774761222_zps99033

photobucket-40972-1381774777543_zps9d329

photobucket-28318-1381774717136_zpsa5c8b

photobucket-55493-1381774731252_zps2074f

photobucket-57648-1381774701885_zpsb0a18

photobucket-53743-1381774687058_zpsbd3b4


Total time worked on project to date: 4 days

Total money spent this week: $0

Total money spent on project to date: $663


I'm right in the thick of it. Gotta keep chugging along. :)

Link to comment
Share on other sites

  • 2 months later...

Christmas break (10 days off) has given me some time to bang on the 280 a little bit.

More cutting.....welding.....grinding but I've made some aesthetic progress.

And I still haven't spent any money! Haha :cool:

Some before shots...

photobucket-36200-1378764402827_zps71dfb

photobucket-50127-1378764418049_zps6639e



And let the patch fest begin. Apologies for the mediocre (even by my standards) picture quality, the light is difficult this time of year, especially at night.

photobucket-2312-1388081874965_zps39ad20

photobucket-2208-1388081843914_zps18807f

photobucket-744-1388081797828_zpsa420876

photobucket-4933-1388099179085_zpse6edb2


And some primer. Still a ways to go before she's ready for Pebble Beach :lol: 

photobucket-9332-1388099130036_zps91de96

photobucket-7788-1388099162386_zpsff14d0

photobucket-3573-1388099145341_zps2fd8a7


I can't wait until I'm doing mechanical things to the car again! Exhaust is in the future.



And oh yeah....

Days Worked on Car: 7

Total money spent on project to date: $663

Edited by OldAndyAndTheSea
Link to comment
Share on other sites

Hacked away a little last night. Still lots more to do....

photobucket-12015-1388197541722_zps9f707

photobucket-4054-1388198029105_zps4ff50e

photobucket-6360-1388197572867_zpsefe209

photobucket-5065-1388197558503_zps01ea2c


And more progress this morning/today.

photobucket-9828-1388264708176_zps6a50d5

Some test fitment.

photobucket-7003-1388264693231_zpsd331a4

Primed

photobucket-1965-1388264754192_zps454d23

photobucket-11639-1388265045439_zpsd6f2d




I'm not done for the day yet.....More tonight.

 

 

 

 

EDIT: More

 

Rinse and repeat. Driver's side. (note: exhaust tip delete: :))


photobucket-8211-1388286806286_zps9a0f4c

photobucket-7496-1388286821807_zps150b75

photobucket-2933-1388286844441_zps58c272

photobucket-2026-1388286857556_zps419793

photobucket-4443-1388286869898_zps413a0d

Initial view from the back. I'm not patching anything else, as it is all hidden under the bumper anyway. Also gives me TONS of room for exhaust exits on the drivers side.


photobucket-9389-1388286887881_zpsaee3e3

Once again, I'll finish it in the morning. Tomorrow the bumper can go back on, until paint. Exciting!

Days worked on the car: 9
Total money spent to date: $663

Edited by OldAndyAndTheSea
Link to comment
Share on other sites

More progress from Christmas break at home. I'm headed back to Rhode Island this afternoon.

 

Here's the initial, not straight at all first coat, driver's side.

photobucket-7570-1388359418055_zps733222

photobucket-2951-1388359470092_zps31e998

photobucket-7200-1388359539715_zps81db4c

 

Bumper back on, without gaping holes under it!

photobucket-9356-1388371056912_zps723a11

photobucket-8242-1388371099757_zpsfbc8bc

 

More....

 

photobucket-3443-1388371125268_zps77b629
 

 

 

Roughed out in primer. Lots more tweaking left to do, but for the moment this will work.

This is where I left off.


IMG_20131231_172949103_zpsw3jtekbq.jpg

IMG_20131231_183956807_HDR_zpsfpxez815.j

IMG_20131231_205120780_HDR_zpsrheqakge.j

IMG_20131231_210813438_zps66jtculv.jpg

IMG_20131231_210625872_zpsluvjy1e8.jpg

IMG_20131231_210650411_zpsxl9phnrx.jpg


I feel I've gotten a lot accomplished in the short amount of time I have been home. I am now beginning to feel the majority of the HARD work is behind me. Very satisfied.

Happy New Year all! 


Days worked on project: 11
Total money spent to date: $663


 

Link to comment
Share on other sites

  • 2 months later...

I actually spent some money on the car, for the first time since buying a silicone coupler for my intake.

 

I bought some 3" exhaust making materials. But technically, the scrap price of the old catalytic converter will pay for most if not all of these. So once I do that I'll probably subtract that price from the total once again. The way I see it, this still won't cost me anything in the end. :

 

Muffler - $49.50 shipped rounded up to $50.00

280zxmuffler_zps7fbeef6c.jpg

and some mandrel bends. $80 shipped

mandrelbends_zps39d45b39.jpg


The rest of the straight pipe, and the remaining parts are already owned, thanks to the 240 project.


So for now...

Total money spent on project to date: $793

 

 

 

Also,  I got back to working on the 280 today. Some progress ensued.

Passenger floor got my attention for most of the afternoon.


IMG_20140110_205206268_zpswgnf8x9r.jpg

IMG_20140110_205411622_zpstp7xp7e4.jpg

Stripped the floor of all the sound deadening. Luckily there is still some nice steel hidden beneath all the insulation.

Saving weight! I had to take at least 15-20 pounds of material out of car today.

IMG_20140307_174355315_zps9c7t0pbw.jpg


Where I stopped for the evening. Merely tacked in place.

IMG_20140307_212125415_zpszyeqwau2.jpg


Tomorrow is another day.


Days worked on project: 14

Total money spent on project to date: $793

Link to comment
Share on other sites

Got back out to work for an hour or so tonight after work.

Here are some progress shots.

Somewhere in the welding process....

IMG_20140309_154550131_zpsrnvei1sr.jpg

IMG_20140309_154540101_zpsgxe5gebg.jpg

After I connected the tacks. I laid some chopped strand mat over the freshly cleaned and welded patches. That'll make sure no gaps remain. We're talkin' high quality here. :lmao:

IMG_20140309_185819022_zpssi6koy23.jpg

Then I turned my attention to the rocker panel. I had to rebuild inside the car before being able to rebuild out here. So I got to making some more "off cut" patches.
Real rough, there's a lot going on, hopefully you get the gist.

IMG_20140310_182426955_zpspwvpmtln.jpg

IMG_20140310_200936582_HDR_zpswqvynz4w.j

IMG_20140310_201005715_zpsu5r9mtgg.jpg



I'll try to finish it up and make it pretty sometime tomorrow evening.


Days worked on project to date: 15

Total money spent on project to date: $793

Edited by OldAndyAndTheSea
Link to comment
Share on other sites

Tonight I made a little progress. Basically got myself prepped for tomorrow evening. Did a little welding, some cutting, and threw some filler on the rocker panel. Putty and paint, as they say, makes purdy what ain't.

IMG_20140311_225114029_zpszp2enkch.jpg

But most importantly, I started exhaust stuff :)

I ripped all the old stuff out of there, I'll begin measuring and mock the new piping up as soon as I'm back out there.

IMG_20140311_223057971_zpsjhm6vdqr.jpg

Another "whoops wrong part, I have to order ANOTHER one" piece left from the 240.

2.5" ID - 3" ID

IMG_20140311_223333218_zpsiyqf0lvy.jpg

IMG_20140311_223234259_zpsheol6czf.jpg


I'm excited to see what I can fab up. Time will tell

Days worked on project to date: 16

Total money spent on project to date: $793

Link to comment
Share on other sites

Thanks, and yeah, this car is total garbage. Haha. But for 650 bucks. I can't complain, it's fun to vent on this when things on the 240 are stalled.

 

 

 

 

Blizzard today, so I'm not going into work.

That means most of the day will be spent out in the garage hacking away at the 280zx.

I have just about finished the passenger floor board. A little more welding, grinding, yada yada yada, it will be ready for some paint.

IMG_20140312_142802038_zps2zwttsfn.jpg

IMG_20140312_144529645_zpsx7eeyeho.jpg



Then I'll probably pull the drivers side stuff, and see if I can't start getting that side squared away.

There isn't much weld work after that. A couple more hurdles.


Then I make it smooth, and make it loud. And wait for the thaw.

More to come tonight.

Link to comment
Share on other sites

I have to admire the willingness to take on two projects. The 240 is turning out really nice, and this zx should be a nice companion :D.

Thanks, this car will definitely ease the pain of not having the 240 on the road. It'll allow me to properly finish that car, as it's definitely snowballed into something I consider pretty special.

 

Such a stark difference in quality between the two cars. It's nuts hopping back and forth between rust, and factory fresh. My quality of work has to adjust depending on what car I'm working on, that's what I find the be one of the hardest parts. Realizing this car will never be the 240, and just need to get it close. Anything I do is better than it was. Sometimes I forget that.

 

 

Anywho.....

 

 

Passenger floor is pretty much done. Finally painted (brushed), with some Rustoleum gloss paint I had kicking around the garage. Thinned with acetone 50:50. I used about a 1/4 cup of paint to do the entire floor.

 

IMG_20140315_153431336_zpsdp8q0zsf.jpg

 

IMG_20140315_204245610_zpsmh3qsj67.jpg

 

 

 

 ....And more passenger front wheel well adventures today. Lots of little holes. Lots of time. Lots stronger now.

 

Finished areas painted with same paint mixture.

 

 

 

IMG_20140315_231319837_zpssd2ocbn6.jpg

 

IMG_20140315_233258741_zpsa2lypkfg.jpg

 

I still have the tow hook area and a little bit of the headlight bucket area to contend with, then the entire passenger side will be done.

 

From then on, it's just the driver's floor and anything in the driver's wheel well.

 

I'm close! Oh and I spoke with my friend with the E30 he wants painted some sort of gunmetal color. He said he thinks it would actually be cool if we both had the same color car. So I guess Gunmetal it is!

 

The grey will definitely look great with the blue. Only a few more spots stand in my way. :)

 

 

 

Days worked on project to date: 18

 

Total Money spent on project to date: $793

Edited by OldAndyAndTheSea
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...