240zdan Posted January 27, 2014 Share Posted January 27, 2014 So a few years ago when I built my Z I decided to install a "fuel cell". Well filling up the gas through the interior is getting old, and I could never get my fuel level sender to work properly in the "baffled" foam cell. Its time for the fuel cell to eventually go. The issue is, while repainting the car, I decided it would be wise to shave the OEM gas door. I am pretty much set on putting an LS1 plastic tank in the car, unless I find another suitable alternative. Since this part of the forum pertains to bodywork, lets talk about fuel filler caps/neck. What after market fuel filler caps have you seen that caught your interest? The Z has a slight curve where the cap would sit, so I think a recessed mounting would be a must. So far I have been eyeing the Sparco setup along with an ebay one. My car is white, and I don't want the fuel filler to stand out. I have thought about anodizing the pieces black. Other than finding a OEM door and welding her back in, what would you guys consider if you were to rework the fuel fill cap? Quote Link to comment Share on other sites More sharing options...
socorob Posted January 27, 2014 Share Posted January 27, 2014 http://www.aircraftspruce.com/catalog/appages/aerofuelcaps.php http://www.speedwaymotors.com/Billet-Pop-Up-Gas-Cap,50662.html http://www.ridetech.com/store/coolcap-stainless-steel-gas-cap.html http://www.speedflowshop.co.uk/aero-300-6-bolt-flange-with-stepped-neck-58--52mm-670--capa36nsl-1223-p.asp http://www.eddiemotorsports.com/store/product-category/exterior-parts/universal-gas-fills/ http://www.hrpworld.com/store/default/search?___SID=U&o=Fuel_Safe_Aircraft_Style_Flush_Fuel_Caps&q=Fuel+Safe+Aircraft+Style+Flush+Fuel+Caps http://www.aircraftpartsmart.com/newton_fuel_caps.htm I was looking for some a few years back, and still had these in my bookmarks. Places that sell kit cars also have some cool ones too. Quote Link to comment Share on other sites More sharing options...
LanceVance Posted January 27, 2014 Share Posted January 27, 2014 (edited) I bought a motorcycle fuel tank (GSXR I think) with the door and key for around $80. The tank was dented, but the area around the filler cap provided more than enough straight metal for grafting. It's still sitting in storage awaiting the bodywork stage of the build, so I don't have any pictures, but it's something for you to consider. Socorob, I'm really digging the aircraft fillers on the last page, did you ever price any of them? Edited January 27, 2014 by LanceVance Quote Link to comment Share on other sites More sharing options...
socorob Posted January 27, 2014 Share Posted January 27, 2014 No, I ended up selling the car before I got around to putting a fuel cell in it. Quote Link to comment Share on other sites More sharing options...
z-ya Posted January 27, 2014 Share Posted January 27, 2014 I'm planning on going with large flares in the rear. I will relocate the stock fuel door to the flare, and then use a 280Z fuel filler because it is all metal, and aftermarket fuel filler hose can be easily attached to it. I'm going more a stock look. Quote Link to comment Share on other sites More sharing options...
240zdan Posted February 1, 2014 Author Share Posted February 1, 2014 Thanks for the links. Quote Link to comment Share on other sites More sharing options...
JoshuA Posted January 7, 2015 Share Posted January 7, 2015 Old thread, I know. Some of the old school motorcycle caps are pretty cool too. http://images.wemoto.com/full/FUEL_CAP/10002666.jpg Quote Link to comment Share on other sites More sharing options...
LanceVance Posted January 7, 2015 Share Posted January 7, 2015 Nice find! That would look great on a Vella Rosa kitted Z. Quote Link to comment Share on other sites More sharing options...
jpndave Posted January 8, 2015 Share Posted January 8, 2015 I have one of the caps like your original post, aircraft spruce link on socorob's post. Quality and function is superb. It's in the Jeep project in my signature. Make sure it's positioned to allow a fuel nozzle to fit properly. Quote Link to comment Share on other sites More sharing options...
jpndave Posted January 9, 2015 Share Posted January 9, 2015 Here is the manufacturer's page. I think mine is a locking 300 series. http://www.newton-equipment.com/aero-filler-cap-range.html It seals with an o-ring that is engaged when you rotate the cover, top shelf product. Quote Link to comment Share on other sites More sharing options...
skyline240z Posted February 6, 2015 Share Posted February 6, 2015 Why don't you go make one yourself, since you are a machinist and have access to a 5 axis machine, maybe you can sell some too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.