Jump to content
HybridZ

AXXIS ULT Pads


Recommended Posts

72 240Z SBC S12+8 solid rotor front brakes and MM 240SX rear brakes

 

I have been looking for brake pads that have  good cold bite as I do most of my daily driving in stop and go rush hour traffic.

 

I have tried KVR, Hawk HPS and Poterfield R4S pads and they require a few stops before becoming efficient.

 

I don't care about dust.

 

Research is showing that AXXIS ULT pads have good cold bite and fade resistance. Friction code:  FF

 

 

 

Do these AXXIS pads make a lot of noise?

Edited by Miles
Link to comment
Share on other sites

  • 2 weeks later...

72 240Z

 

Brake setup: Wilwood 1 inch master cylinder,  280Z booster, Toyota S12+8 front calipers with solid rotor, Modern Motorsports 240SX rear calipers and Axxis ULT pads front and rear.

 

For cold bite and overall brake feel these Axxiis ULT pads are excellent.  Unlike the Hawk HPS, Porterfield R4S and KVR pads I have used over the last 10 years these pads do not require three or four stops to get them working in traffic. First stop they bite. Modulation is excellent as well. Good initial bite with good linear feel.

 

Friction code FF

 

They are also sold as PBR ULT.

 

Source: http://www.importrp.com/index.php

 

Check out the Bimmer sites for write ups.

Link to comment
Share on other sites

  • 3 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...