grayson260z Posted March 9, 2014 Share Posted March 9, 2014 (edited) So my floor pans fromhttp://www.thezstore.com/pathing/PROD/30-7317 Arrived and we started attempting to install them. Well everything is going well thank you for asking. Except We've met a small snag. Right below the little recessed cup thing where the seat belt retractor sits was a little rusted out and it's at a weird angle to where we don't think we can just weld some sheet metal in there. I don't have a good picture but will get one shortly today. If you guys have ever ran into this problem let me know how you surpassed it. It's the place where the driver floor pan stops and the slanted piece starts up. Only pictures I got. Edited March 9, 2014 by grayson260z Quote Link to comment Share on other sites More sharing options...
duragg Posted March 9, 2014 Share Posted March 9, 2014 They are all different and there is no perfect "right" way except it should end up strong, safe and without as much rust or as many holes. Cut the area out bigger and fashion a piece to get in there somehow? Nobody will ever see it, you will not be judged on the outcome, it can only be better than it was. Carry-on. Looks good. Quote Link to comment Share on other sites More sharing options...
RebekahsZ Posted March 9, 2014 Share Posted March 9, 2014 Not "as much" rust. 😜So true. Quote Link to comment Share on other sites More sharing options...
B. Whisky Posted April 9, 2014 Share Posted April 9, 2014 i got rid of the little cup and made it flat. msa replacement seat belts dont use it. I just made sure that i kept the hole for the bolt and tied that metal in well. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.