JoeK Posted September 13, 2015 Author Share Posted September 13, 2015 T3 have anything to say about it? Quote Link to comment Share on other sites More sharing options...
BluDestiny Posted September 13, 2015 Share Posted September 13, 2015 Miky360, are you running the straight through RCA's? And how much camber are you running? I don't see how that would have been an issue with camber tilting the bottom of the wheel outward. Quote Link to comment Share on other sites More sharing options...
Phantom Posted September 14, 2015 Share Posted September 14, 2015 So you're running a combination of Arizona Z Car and T3 suspension components? I can understand why you might be having issues combining two aftermarket parts suppliers whose units were designed to replace the stock but work with their own parts, not someone elses. I only have a few things from T3 at this point but have been very impressed with their work. Quote Link to comment Share on other sites More sharing options...
BluDestiny Posted September 14, 2015 Share Posted September 14, 2015 Miky, you'r running http://www.arizonazcar.com/lowarms.html in combination with https://technotoytuning.com/nissan/240z/front-lower-control-arms-240z-260z-280z? Because that is the setup I was going to go with, just with 16" or 17" wheels Quote Link to comment Share on other sites More sharing options...
JoeK Posted September 15, 2015 Author Share Posted September 15, 2015 At Bludestiny, I believe Miky is running these https://technotoytuning.com/nissan/240z/gtx2-front-lower-control-arms-and-tc-rods-datsun-240z-260z-and-280z with the AZC roll center adjuster, which is the last picture in your AZC link Quote Link to comment Share on other sites More sharing options...
miky360 Posted September 21, 2015 Share Posted September 21, 2015 I WAS running T3 RCAs then came into an issue because my steering knuckles were first gen smaller holed ones so I might as well upgrade to the AZC ones. My t3 ones are now for sale if anyone is interested ahaha Quote Link to comment Share on other sites More sharing options...
G-E Posted September 24, 2015 Share Posted September 24, 2015 Just fyi a straight RCA will reduce camber ever so slightly... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.