Jump to content
HybridZ

1975 260Z 2+2 coupe First timer project


Recommended Posts

Hi all,

Name is Dave, I'm Scottish but currently live in New Zealand... found this forum while searching for Z cars seemed to have a lot of projects and technical information so I thought I would throw in my 2 cents as well. I'm guessing most people on this site are from America?

 

Im new to the whole S30 game but have admired the cars for a long time so when one came up for sale near me I decided to have a look and made a bid, sadly it went for more than I was willing to pay for it but through some miracle it came back up for sale a few weeks later (sale fell through) so once again I bid and this time won the auction. Managed to get it for almost $2000 less than the first auction. Score! I pick it up on Saturday morning then the fun can begin.

 

This is the lucky lady herself...

 

385444784_zpscxcbknic.jpg

 

385444698_zpsmfqpmzq4.jpg

 

Needs a bit of TLC... and when I say a bit I mean a lot. Anyway something to keep me busy and spend all my money on eh?

 

So I will hopefully keep updating this as often as I can or whenever I accomplish something or need help!

 

 

Link to comment
Share on other sites

Yes the majority of people on this site are from America, and yes we can be very brash a lot of time. Doing your own research first and presenting your questions in a comprehensible way will get you very far on this site. There are also plenty of people on this forum from other parts of the world as well. 

 

Looks good, and welcome to the never ending money pit game. 

Link to comment
Share on other sites

Thanks guys, looking forward to the challenge and eventual joy from owning this car!

 

Quick update, got the car home on Saturday then set to work on Sunday morning, stripped out most of the interior and started to identify areas of rust that will need immediate attention. Since I have never done any rust repair before and they are in some pretty important places, I'll probably leave this to a professional... Some pics of the rust...

 

IMG_0489_zpskfiqofjv.jpg

 

IMG_0491_zps6afnoc4a.jpg

 

IMG_0490_zps7cnxxbes.jpg

 

IMG_0492_zpste64sbl9.jpg

 

IMG_0493_zpsuduip5dg.jpg

 

Will keep the updates coming, should hopefully get some work done on it this weekend!

Link to comment
Share on other sites

  • 11 months later...
Been a while since I updated this thread but have been updating my local NZ forum. Copied and pasted this info from there so please excuse the odd formatting etc..
 
So some more progress, got the shell completely stripped of everything. 
 
IMG_0625_zps1wdhryin.jpg
 
IMG_0626_zpswwddcedl.jpg
 
IMG_0627_zpsqno47wuk.jpg
 
and a cheeky little picture of the new heart...
 
IMG_0628_zpskz53qpug.jpg
 
Next stage is to possibly get it sand blasted before getting all the rest removed. Actually struggling to find someone willing/able to do the work for a reasonable price. Would do it myself but I don't think I have the skill to get it done to a reasonable standard. Also with the floor I need it to be certified by a repair inspector. Will be fun to jump through those hoops...
 
Hopefully with the shell out the garage I will have the time and space to start tearing down the suspension and drivetrain to give it a bit of a tidy up and revamp.
 
The work goes on...
 

Also, got my new wheels today. I know it's a bit early in the project but they were a good size and price so thought I may as well. They are 16x9 et20. Let me know what you think. 
Thanks. 
 
 
image.jpg1_zpsk715vvys.jpg
 
 

Needing to strip the rubberised under-seal off the shell but not wanting to work under the car. I had to build a rotisserie for it. 
Got the idea of 2 engine stands and modifying them for the car. 
 
so after a lot of measuring and double checking and some welding.
 
IMG_0724_zpszkfbbmv8.jpg
 
I ended up with this...
 
IMG_0746_zpsnskigtaa.jpg
 
IMG_0747_zpsailox2w2.jpg
 
IMG_0763_zpsxrezjhmq.jpg
 
IMG_0765_zpsufajlpqt.jpg
 
IMG_0754_zpsi8cnulmr.jpg
 
It's reasonably stable and sturdy enough. Will do the job while i need it.
Hopefully have it stripped and off to get media blasted, primed and sent off to get the rust repaired.
 

Been a while since I updated this, been on Holiday the last month in Cambodia and Vietnam but managed to get a little bit done before I left.
 
Got bored of doing the body work so thought I would make a start on the sub-frame / suspension parts so stripped and removed the old knackered bushings (fairly easy with a blow torch and a vice) and put in some nice shiny new red polyurethane bushings and give them a lick of paint.
Pretty please with the way they turned out...
 
IMG_0859_zpsompw6euq.jpg
 
IMG_0872_zpsabmzdkon.jpg
 
IMG_0862_zps8fg3qsrw.jpg
 
IMG_0863_zpszbwogdpt.jpg
 
IMG_0866_zpsi4asvx54.jpg
 
IMG_0873_zps27xpxkvn.jpg
 
Spent way too much money on holidays so progress may be slow for a while...
Hopefully get some more work done on it in the coming weeks.
 

Well, finally got the car to a point where I can take it to the blasted, took it in on Friday morning so should hopefully get it back on Monday, will put up some picture when I get it back.
Then after that it's off the get the holes repaired and the body work done.
While all thats happening I finally have space in the garage to work on all the other bits:
Rebuild suspension, brake upgrades and start work on the interior restoration.
Going to be good!
 

Picked up the shell today. Looking MUCH better all one colour and no visible rust. Turned out to look not as bad as I imagined. 
Plenty please with it 
 
image_zpsokybkaro.jpeg
 
image_zpsv2u2jkhd.jpeg
 
image_zps1n7zf6ah.jpeg
 
But there are previous repairs which is actually where the worst corrosion has taken place. Disappointing. 
 
image_zpsdojbaqif.jpeg
 
image_zpsxnzaq8hq.jpeg
 
 
image_zpse0mfsxdb.jpeg
 
 
So next is off to the body to shop to have all the holes sorted out. Exciting times!!
 

Body shop quoted me an enormous figure so thought I would tackle what I could on my own.
With the long weekend I though I had better get some work done on the car so set about cutting out and replacing the holes left by the sand blasting.
 
Little patch on the rear passenger corner. First time using a welder so please excuse the average welds:
 
patch%202_zps0vbhms5l.jpg
 
patch%201_zpsup4zlkqg.jpg
 
Replaced the spare wheel well in the boot. All sealed and primed:
 
wheel%20well_zpsmyt9kcz8.jpg
 
Then I took to the passenger door sill:
Removed a previous "repair" only to find that they had just welding a panel straight over the rusted area .   :mad:  So the panel behind had rusted as well... So took that out and started replacing the area. There is a lot to do. I'm guessing the driver side is the same.
 
Removed the patch:
 
sill%203_zpsx2rd8nwk.jpg
 
sill%202_zpsga18mvw6.jpg
 
Cut out the rusted area:
 
sill%201_zpsvcnzdhol.jpg
 
Treated the area:
 
sill%205_zpsvxysb3wb.jpg
 
Welded in the new steel:
 
sill%207_zpsbejxlmfj.jpg
 
sill%2010_zpsy7bkqkdx.jpg
 
Still needs grinding and sealing but getting there. There is still a long way to go but little by little I will get through it. :)
 
On holiday back in Scotland at the moment but when I get back I will hopefully get stuck in to more work. Can't wait.
 

 

Link to comment
Share on other sites

  • 2 weeks later...
  • 1 month later...
Jeez, it's been a lot longer than I thought since I posted an update on here...

 

But, I have made some progress! Not working at the moment so have plenty of time to dedicate to the car.

 

Finished off the passenger side rear quarter... Still need a lil finishing work.

 

IMG_1218_zpsvmzvtxlp.jpg

 

Then I set about the rear quarter window...

 

IMG_1222_zpsumrxqypa.jpg

 

IMG_1223_zpsm1q2g5s5.jpg

 

Afterwards was over the the drivers side which turned out to be A LOT worse than the passenger side. It's obviously been bearing the brunt of the weather when it was stored, looks to have had water sitting in the sill as well as the bottom portion most of the way along was pretty well done for.

Seems like a huge mountain to climb but slowly and sure I worked my way through it as well as the driver rear quarter which I am working on now...

 

 

 

IMG_1225_zpsc3qydamn.jpg

 

IMG_1234_zpslgbnhcte.jpg

 

 

 

IMG_1249_zps4el1seng.jpg

 

IMG_1251_zpsab1s7elw.jpg

 

IMG_1253_zpsnq41ezs5.jpg

 

IMG_1257_zpsz9qjvmga.jpg

 

IMG_1271_zpsqjpamw3d.jpg

 

IMG_1270_zpszqcxxid6.jpg

 

IMG_1272_zpss2xmz0sx.jpg

 

Still to come!...

Ordered some cavity wax and sprayer so I can coat the inside of the sills and rails etc.. once they have been repaired to help stop any further rusting!

And then I will be moving on the the rear of the car... Lower rear quarters on both sides are pretty crappy and I will need to do a serious amount of work on the latch panel as well. Joy. Plus! the lattice sort of panel between the engine bay and windscreen needs repaired as well which will be a bit of a challenge.

 

Then finally, I can get the floor and rails looked at which once they are being done (by others), I will get in to the doors, wings, bonnet and hatch lid...

 

The fun (and spending money) never ends!!!

  :D   :D   :D   :!:

Edited by Dapat88
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...