Klmykvl Posted July 6, 2015 Share Posted July 6, 2015 I had MS2 running on my l28et. I adjusted my fuel mixture after that it seems that my injectors have stopped firing. I get a pulse light while cranking and both banks are flashing while using the stim. I even un did all changes, but still cannot get the car to start. I no longer hear the injectors clicking. Any ideas? Quote Link to comment Share on other sites More sharing options...
skirkland1980 Posted July 6, 2015 Share Posted July 6, 2015 Make sure you have ignition voltage on one pin at each injector. Use a voltmeter and use the battery as ground. Also see if there's a difference using the engine as ground. If that checks good look at the ms grounds. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.