COMBO/TURN SIGNAL SWITCH WIRING

[stony]

I have a set of toggle switches wired in now for headlights and turn signals. I want to wire those into the stock combo switch. Need to know what wires go where.

 

 

3 stand alone large gauge wires. I THINK I HAVE THESE RIGHT BUT LET ME KNOW IF THEY ARE WRONG

 

1. R  = BATTERY POWER

2. B = GROUND

3. WR = SWITCH 12V

 

6 pin plug

1. RW =

2. RB =

3. GR =

4. w =

5. GB x 2 =

 

9 pin plug

 

1. GW =

2. GL =

3. LY =

4. YL =

5. L =

6. LW =

7. YB =

8. LY =

9. LR =

 

 

[Miles]

Google this:  "240z electrical schematic"  Many Z owners have made color electrical schematics.

 

Also: "240Z combination switch repair"   Many how-to repair/wire combo switch write ups by Z owners.  Some have all of the wires to the combo switch identified by color and function.  See attached example.

Edited July 30, 2016 by Miles

[stony]

I don't have any of the stock harness and those diagrams aren't much help with my limited expeirence reading those. Would be awesome if someone could tell me which of the wires I use and where they go. Especially the 3 larger gauge wires.

[bramagedained]

This is from my early 260z so YMMV.

 

Datsun colors are the color at the plugs/switches.

 

https://docs.google.com/spreadsheets/d/1Mlqy6QR2UduNRmCWBGEcglUYTEqlRhLIg8jXEqfWP0k/edit?pref=2&pli=1#gid=0

[Exposed]

hopefully someone can shed some light on this. the wiring diagram in post #2 shows the hazard switch have the following colours 

GW,GR,GB,G,G,GY,GY,WB,WR

 

But when looking at the hazard switch i see red,green, white, yellow, black, red/white, red/yellow, red/black and red/blue

 

Can someone explain what im missing, why dont the colours match up?

Edited November 18, 2016 by Exposed