Jump to content
HybridZ
disepyon

Prospect-D Replacement Panels

Recommended Posts

UPDATE:


 


before 2/13/2017: Prospect-D started out making inner rocker panels for the 240Z and early 260Z. Please refer to site and attached pictures.


 


2/13/2017: Officially Established a Website: https://www.prospect-d.com/


 


2/19/2017: NEW PRODUCT (240Z and 260Z Seat Brackets)


 


Prospect-D now offers seat brackets for 240Z and early 260Z along with the Inner rocker panels. These are made from 16G CRS which is a tad thicker than stock material.  The rear seat brackets has been designed to mimic the front bracket and eliminate the 3 rear factory brackets.


 


Please see attached pictures and additional information on our site, which includes an install guide for further details.


 


 


Thanks for Looking!


post-1610-0-43417000-1471576429_thumb.jpg

post-1610-0-63658800-1471576439_thumb.jpg

post-1610-0-88740400-1471576448_thumb.jpg

post-1610-0-25534400-1474869201_thumb.jpg

post-1610-0-20990600-1474869275_thumb.jpg

post-1610-0-77151000-1474869285_thumb.jpg

post-1610-0-19673300-1475126247_thumb.jpg

post-1610-0-50553700-1475126249_thumb.jpg

post-1610-0-76434400-1475126253_thumb.jpg

post-1610-0-86875000-1475126256_thumb.jpg

post-1610-0-01835700-1475126261_thumb.jpg

post-1610-0-72483900-1475126307_thumb.jpg

post-1610-0-66365500-1475126316_thumb.jpg

post-1610-0-30447200-1475126326_thumb.jpg

post-1610-0-91408900-1475126335_thumb.jpg

post-1610-0-47690500-1475126345_thumb.jpg

post-1610-0-83692200-1475126354_thumb.jpg

post-1610-0-83813800-1475126363_thumb.jpg

post-1610-0-83623500-1487531211_thumb.jpg

post-1610-0-36785100-1487531221_thumb.jpg

post-1610-0-07746100-1487531227_thumb.jpg

post-1610-0-04709500-1487531246_thumb.jpg

post-1610-0-56311200-1487531255_thumb.jpg

post-1610-0-85273700-1487531269_thumb.jpg

Edited by disepyon

Share this post


Link to post
Share on other sites

I'm definitely interested. You might consider making just the ends, as that where the rot tends to be and shipping would be way cheaper. Either way, I'm in for a set and I'd prefer full length, I don't frequent here much since the attitude shift years back, you can email me at [email protected] if you get these made.

Share this post


Link to post
Share on other sites

I'm definitely interested. You might consider making just the ends, as that where the rot tends to be and shipping would be way cheaper. Either way, I'm in for a set and I'd prefer full length, I don't frequent here much since the attitude shift years back, you can email me at [email protected] if you get these made.

Hey Evildky,

 

Sorry for the late response if your still visiting this thread.

 

I am currently making a set for someone else. Let me know if you are for sure about buying a set from me in case you do not get my email.

 

 

Fellow Z members,

Had promising interest from a well known datsun online store, but seems to fell through, never heard back from them.

 

So it appears there isnt enough interest in these to make by bulk, just let me know for now on if you want to purchase a set from me and ill just make them for those that ask.

Edited by disepyon

Share this post


Link to post
Share on other sites

Update for those waiting on parts:

 

As of now I have the rocker panels made. Will be working on making the seat belt mount and support plates.

 

 

Below are pictures of the general process that goes into making them to give you an idea of whats involved with how I make them.

IMG 1822

 

IMG 1827

IMG 1828

IMG 1831

IMG 1835

IMG 1838

IMG 1864

IMG 1870

IMG 1880

 
Parts are finally coated with a light layer of Bloxide rust preventative weldable primer to keep from rusting during shipping and before installation.

IMG 1890

IMG 1891

IMG 1892

 

Edited by disepyon

Share this post


Link to post
Share on other sites

Thanks guys,

 

Kevbo82,

I had some time after work to make the tie in plates tonight, refer to my edited main post.  I received the shipping boxes today however I am still waiting on bubble wrap to arrive. Hopefully it can get here either Thursday or Friday so I can get these shipped out to you and the other customer before the week is over.

 

Will keep you updated.

Edited by disepyon

Share this post


Link to post
Share on other sites

Thanks guys,

 

Kevbo82,

I had some time after work to make the tie in plates tonight, refer to my edited main post.  I received the shipping boxes today however I am still waiting on bubble wrap to arrive. Hopefully it can get here either Thursday or Friday so I can get these shipped out to you and the other customer before the week is over.

 

Will keep you updated.

Awesome, i'm totally just sitting around twiddling my thumbs with nothing else to do on this car waiting for these parts  :lmao:

The more I cut into it the more rust I find, so hopefully your parts will be the start of actually putting pieces back on rather than cutting apart! 

Share this post


Link to post
Share on other sites

A quick post to give some props to Brent

 

I just received my set of inner rockers yesterday, the whole transaction went super smooth, they were produced and delivered in exactly the time frame he described when I first inquired. The packaging, shipping, communication, and product were all extremely professional and well executed. I wouldn't hesitate to do business with Brent again! I'm sure if you're looking at these you know there is no other real source for them, i'm so happy to have a set for my project 240 because I'm not sure what I would do without them! Here's a shot of one test fit on my car.

 

66E73A2B-7750-4E4B-9C99-6BC3524F6E39.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×