Jump to content


Photo
- - - - -

L28ET MLS exh gasket


  • Please log in to reply
4 replies to this topic

#1 kubus

kubus

    Newbie

  • Members
  • Pip
  • 13 posts
  • LocationGdansk / Poland

Posted 13 December 2016 - 03:23 AM

hi there guys....

 

what You run with Your turn setups ??

as all the common gaskets available - are "paper" like - and don't lasts long ....

 

any ideas / tips ??

 

many thanks.

 



#2 softopz

softopz

    Member

  • Donating Members
  • PipPipPipPip
  • 419 posts
  • LocationOntario Canada

Posted 13 December 2016 - 05:42 AM

The nissan OEM one should be a paper/graphite/metal. I also found non oem in that same material and like them



#3 BMAC

BMAC

    Moving Up

  • Members
  • PipPip
  • 30 posts
  • LocationFL

Posted 13 December 2016 - 02:32 PM

I use this gasket for my l28et.

http://www.zcarsourc...176_198420.html



#4 Tony D

Tony D

    Wiki D

  • Donating Members
  • PipPipPipPipPipPipPipPipPip
  • 9961 posts
  • LocationReno NV & Lucena Quezon, Philippines

Posted 23 December 2016 - 11:00 PM

0.051" Monel Wire in a mating groove machined in the manifold face.
Held in with either a dab of red RTV or clear packing tape across the flange when installed whichever time allows.
Misanthropic Anthroparion Class 5 Hoarder, aspiring to posthumous fame as my containers are cut open and the market floods with crap I've squirrelled away over the years! I endeavour to persevere...

#5 Sylvre

Sylvre

    Newbie

  • Members
  • Pip
  • 2 posts
  • LocationGeorgia, USA

Posted 28 March 2017 - 06:25 AM

Tony, would you happen to have any pictures of that setup or similar?




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users