Jump to content


Photo
- - - - -

Shifter boot seal 5 speed


  • Please log in to reply
2 replies to this topic

#1 Enginerd81

Enginerd81

    Newbie

  • Members
  • Pip
  • 23 posts
  • LocationPlainwell, MI

Posted 08 January 2017 - 09:28 AM

Quick and easy question - I'm putting my trans back together, disassembled to reseal/gasket/oring to get rid of leaks, and wondered if there is supposed to be anything used to secure the boot that on the shifter:

 

http://www.zcarsourc...tch/1410169.jpg

 

The factory manual doesn't show anything and there was a zip tie on it when I disassembled it. Wondering if it supposed to be sealing all on its own at the base or if others have used a hose clamp/CV boot clam or other. 

 

Thanks

Bryan


'76 Datsun 280z 2+2

'81 L28ET Megasquirt 2 with Supra 440 Injectors

Evo I/C ~ 9 PSI

In the bullpen: Get Megasquirt tuned in and turning boost up


#2 Ben280

Ben280

    Always Here

  • Donating Members
  • PipPipPipPip
  • 110 posts
  • LocationPortland OR

Posted 08 January 2017 - 09:31 AM

I've had good luck with a zip tie. You could go with something heavier if you were worried, but I don't think there is a need. 



#3 BJSZED

BJSZED

    Moving Up

  • Members
  • PipPip
  • 41 posts
  • LocationOntario, Canada

Posted 08 January 2017 - 07:45 PM

I put a new boot seal on, didn't use anything...works fine. If you are re-using the old one, might be looser. Ziptie probably best






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users