Jump to content
HybridZ

Heavy Duty frame rails and connectors


Recommended Posts

    Sorry for Not Posting for a while.   After my last post on Jan 30,  I went my Orthopedic Surgeon to check on

my Sore Left Knee.   He previously did a Partial Knee Replacement on my Right Knee about 6 years ago.  At that time,  my Left Knee was not too bad but I had pain occasionally.  After the 2022 Sema Show, my knee got real bad to the point that I could hardly walk at the end of the day.   So I made an appointment to have my Left Knee checked out.   No surprises, the X Rays showed Bone to Bone Contact causing the pain.   So I wanted the surgery as soon as possible.    But I did not expect that there would be an opening for my surgery in only 2 weeks.  So on Feb 15 , I had a Total Knee Replacement Surgery which consists of installlation of a Titanium Joint inserted into my leg.   I went home the same day but I knew that the Physical Therapy would be Painful and take Months too.

 

Pic of my Left Knee

IMG_5237.JPG.296e21ecc0fc8dd96e4713c27f7fae47.JPGTop to Bottom

 

 

-Now back to posting - continuation of Air Conditioning Installation

 

Pic of the Sanden Compressor mounted with 90 degree Outlet Fittings to clear the Hood.

IMG_5241.JPG.3cfb51b0cdbf5dfb9cdaf7bf21917d70.JPG

 

Top View of  Compressor Installation.

IMG_5242.JPG.355d06cbab49a1620b574dd4e58ac32a.JPG

 

Vintage AC Condensor mounted in front of the Radiator Core Support.

IMG_5243.JPG.bc92e67899db98c20b222adef7e1ec50.JPG 

 

As the new AC Compressor Location changed the Drive Belt Arrangement for the Alternator so

new mounts had to be constructed.

IMG_4766.JPG.1bc66ff17a2bdf6f79cc4f89aa42f21e.JPG

 

The New Alternator Mount being Test Fitted.

IMG_4768.JPG.d70ad5a7a9b6c6500cca78bf4fcb9136.JPG

 

Front View of New Alternator Mount.

 

 

Mount was Powder coated and Test Fitted.

IMG_4770.JPG.192c3dddead912b24bfeca499aa97668.JPG

 

 

Front View of Mount

IMG_4769.JPG

 

Because of the Evaporator Hoses, the Glove Compartment Box had to shortened in Depth by 2"'

IMG_4778.JPG.a7a49b432b24c1f999590486205b9ef8.JPG

 

So now, the Holley ECU Box was mounted in the Lower Shelve.   This postion is better for view the ECU LED Trouble Lights.  The Upper Shelve would  be the New Glove Box although smaller.

 

The Glove Compartment Door Hinges were slotted to provide additional adjustment.

IMG_4832.JPG.9ee28e8694527fe62c0f3fa4dc6159b9.JPG

 

 

Next- More Modifications to AC Vents ,etc.

Edited by toolman
add text and pics
Link to comment
Share on other sites

  • 1 month later...

Reapairing Right Side Dashboard Ac Vent Hose-

   The Right AC Vent  2"Hose was broken off from the Duct Vent.   So a method to reconnect that hose would have

to be found.    I diecided to use a 3' piece of  2" radiator to"splint' the Vent Hose to the plastic Vent Housing.

IMG_5088.JPG.8b3534f4edd046b0c90ab0ea60c05a5b.JPG

 

 

 Used the Hot Glue Gun to adhere the Spint to the Vent Housing.

IMG_5089.JPG.5c65656c2b8f8149426fac48b7ced318.JPG

Inside View of the  Splint

 

 

IMG_5092.JPG.00b7919de340877ef9148a1307c40eb6.JPG

 

The Finished Repair if the AC Vent Hose and Duct

 

I had to fabricate a Micro Phillips Screwdriver to remove the Three Phillips Heas Screws to Chrome Duct Vent.

IMG_5093.JPG.860d28d8bb192fb9e5a5e5e08a447be9.JPG

 

This Micro Phillips Screwdriver also was used in other 'tight spaces" where normal phillips screwdrivers would not fit.

 

Modifying the Dashboard Center Vent-

   The Original Center Console Vent only had a small piece of foam around the vent tube leading to the Blower Box.

I decided to construct a sheet metal Tube that provide a tighter seal to Outlet Vent.

IMG_5039.JPG.988d0e2227c7af5760cd7d2adfa04b5b.JPG

 

Making Template for the Vent Connector

IMG_5042.JPG.783c5bb3d325c2a3c12fb2b4bdd68352.JPG

Bending the sheet metal with a 5/8" deep socket to match the template shape.

 

 

Finished AC Vent Connector

IMG_5044.JPG.09fa5580e3cf1cefbcae98838336b1ff.JPG

 

 

Next-Heater Blower Fan Replacement

 

 

Edited by toolman
add text and pics
  • Like 1
Link to comment
Share on other sites

  • 1 month later...

Replacement of Heater/AC Blower Fan-

 

     Finding a Replacement Blower Fan especially with the similar mounting arrangement and size was not easy.   The

closest one that found was  one from a Kai Sportage for $99. This was a brand new one and a rebuilt one.   The blower shaft was the same size as the original Datsun.   Their Fan was slightly larger (about 1/4"}but made of black plastic..

 

IMG_5077.JPG.4d562d1f606a1568e883476c0dbaef54.JPG

 

Its speed was a little faster so hopefully it provide more air flow.

 

Replacement Electrical Connector Plugs-

 

     Alot of my original Datsun Plastic White Electricl Connector Plugs were pretty brittle.    

IMG_4216.JPG.51a83d59995c7341319a6b5002f86136.JPG

 

   So I found these Replacements on Ebay.

   IMG_4371.JPG.5d8843996a78ced6aa510e558446825e.JPG   2.3 connector and terminals

 

        Ebay also had 6.3 connectors and terminals but I could not find its pic.

 

Repairing Interior Vents-

    These vents draw air from the two air tube built into both top sides of the engine compartment.   Basically the vents function at high speeds (above 40mph}.   Some people forget to close them when running their Air Conditioning and wonder why the Air Conditioning is not cooling the vehicle.

    Replacing Foam gaskets on the Vents.

IMG_E3795.JPG.1723b64def94c02ca649465f9ec42b62.JPGIMG_E3795.JPG.1723b64def94c02ca649465f9ec42b62.JPG

Used Contact Cement to Glue the form the Ducts.

 

 

Next- Replacement of Wiper Motor

 

 

Edited by toolman
wrong pic
Link to comment
Share on other sites

  • 2 months later...

WIPER MOTOR REPLACEMENT-

     i replaced my Original Factory Wiper Motor with one from a 1992 Honda Civic.   Amazon had a Cardone New Wiper

Motor #85-1423 for $105.   This particular wiper motor has "Parking Return Feature" which returns the wiper blades to return in the Parking postion when Shut off.   The original Factory does not have this feature so the Driver has to accomplish this task manually.

IMG_5079.JPG.6884f370c6e6cd024a947201585a2b67.JPG

 

This Honda Wiper Motor has the same mounting bolt pattern so the installation is easy.   Also the  Motor rotation is the same.    The Datsun Wiper Mounting Plate has to "notched" for the Honda Wiper Motor Clearance.   The Honda Motor

was similar Mounting  Slot for the Datsun Wiper Arm and bolts right up.

   A Hot Glue Gun was used to glue down the Hoda wiring to prevent possible  wiring problems.

IMG_5081.JPG.4dbb621ab3c3477b2fb418c327627143.JPG

 

The most difficult portion of this installation is the Electrical Wiring of this swap.   A Water Proof Relay was utilized as the

Wiper Motor is located in the Cowl Section of the vehicle.   I used -irhassody 40.30 Amp 12vt Waterproof 5 pin HD relay $11 from Amazon.

       This is my wiring diagram for this Honda Wiper Motor Swap.   Double check the wiring colors as I found some wiper motors has different wiring colors.

   IMG_5543.JPG.4d4a1325a1cd676d4af4ee5062e74f23.JPG 

 

 

Honda Wiper Motor installed.

IMG_5082.JPG.959f4c82edf06415edfd2e04e74e4bb4.JPG

Edited by toolman
Link to comment
Share on other sites

  • 1 month later...

SEMA Show 2023 Las Vegas,NV  Oct32-Nov4

 

    The Sema Show is the Biggest Automotive Show in the World so there are hundreds of cars, trucks and now Electric powered vehicles( gokarts,sport cars,etc) were there.  I will try to label the vehicle pics with the proper description as possble.

 

Sema Show Sign outside of the Central Hall

 IMG_5671.JPG.5b66f56eb3c9e7153baffb68d1c67383.JPG

 

interior picture of the Show

IMG_5674.JPG.b86b6de7dde225f83701296ffeb696ed.JPG

 

 

Nitro Funny Car on Display

IMG_5677.JPG.67952c62544130f8013f45b559c7cc02.JPG

 

 

240z with LS9 supercharger and 6 speed trans at the show for the Ultimate Street Car Competition Race.   This

race consists various street racers who competete a events across the USA(East to West Coast).  The events include

racing in a straight line, 60 to zero stopping,  a tght sports car track racing.

 

LS9 into a 240z with 6 speed trans

IMG_5678.JPG.2625da33c85d36f3787d2ca762555d96.JPG

 

LS9 supercharged  Z

IMG_5679.JPG.a144c69d87306eee3d948e9907064389.JPG

 

 

Interior View note-Hand Brake

IMG_5680.JPG.f4a2758739fbe046e6b8194f111b4fc8.JPG

 

 

There were Super High 4WD trucks all over the Show.

IMG_5682.JPG.dcfb3968ade2c78ab71b74bea400eeed.JPG

 

 

IMG_5683.JPG.375ea6575dd5b6189745afcd5f647a7c.JPG

 

K Mini Race Truck

IMG_5707.JPG.a4580915f9bb1940588d37614b8e8bd7.JPG

 

IMG_5704.JPG.e7caa37a6b8f403efb0d7a9f38437a23.JPG

 

Under carriage

IMG_5706.JPG.90ff1cc851f2e7372ab4115b04cafbbd.JPG

 

Truck Interior

IMG_5708.JPG.550b3bb6d4c53043e71e2b0c407f7a2f.JPG

 

 

Crowds of people outside the buildings

IMG_5729.JPG.bffe3de9f401558df14062c1e2d537be.JPG

 

 

 

 

 

How high can you go?

 

IMG_5670.JPG.45fa5d26fa4e43c6e2841f2366160f1b.JPG

 

Beautiful Red Ferrari with V10 motor

IMG_5697.JPG.94ab44885c98b66fb18f402aac122711.JPG

 

V10 motor

IMG_5698.JPG.c1a558ddafa413446718476e5aece7b2.JPG

 

4WD Truck Lineup

IMG_5717.JPG.fea67b2e4369513b229796b77d8bba66.JPG

 

IMG_5718.JPG.17e2a5e60dc7991253265f1bd5fad445.JPG

 

Another Z Race Car

IMG_5684.JPG.09ee5dcd4f5900a934ec03cfcee16305.JPG

 

 

Skyline JDM

IMG_5693.JPG.1f53830064b39a0bb7ea52c80d847165.JPG

I

 

Interior

IMG_5694.JPG.956b1f355557c71ee99e038eabe802c9.JPG

 

IMG_5695.JPG.df9d9d8ae5b8a1d53b5e2819dbd4a0a8.JPG

 

Super Clean Green 240Z

 

IMG_5700.JPG.2ec59cb87d1ecddc22fb975e7625fd71.JPG

 

Full Blown  Black Dodge Charger

 

 

Blown Hemi

IMG_5716.JPG.f9bb4a5d73ef94cc240b302685452336.JPG

 

IMG_5723.MOVIMG_5723.MOV

 

Inside of Show

IMG_5676.JPG.c36960c466f98fce0b0e1a323b2b8022.JPG

 

Large Trailing Arms

 

IMG_5727.JPG.e1b81bbc4f0d4a8144f0e18feaa8b9e9.JPG

 

Lambo with Metallic Wrap

IMG_5730.JPG.ad6b931769e37b6e4837c27a9ac35528.JPG

 

 

You can not get much Lower than this!!

IMG_5731.JPG.468ed5c2635e42762a9fd3be9a7f2e44.JPG

 

Road Racing 240Z

IMG_5732.JPG.af2007da5d73aa6dc9e0bc3b3dd82493.JPG

 

More Road Racing Zs

IMG_5734.JPG.7abce8e93dd44f62e9b6e47aff541604.JPG

 

 

California Lower Rider Chevy

IMG_5735.JPG.36bdb4998be2449539573b3d8c8d6deb.JPG

 

Liberty Walk 370Z

IMG_5736.JPG.952172ad62f5e73638ff1216e2b604b7.JPG

 

 

Scion Race Car?

IMG_5737.JPG.5b3ca5a18e7690e8a8e0ea7bb359e19e.JPG

 

Porsche Race Car

IMG_5740.JPG.42374446e9205b09d1b724d513c54994.JPG

 

Cobra Race Car

IMG_5726.JPG.11795df67fefc423bbedd82d24ecdcf6.JPG

 

 

Fully Blown Hemi Roadster

IMG_5744.JPG.227b6b78f0e0df92a4cad821b82c1c38.JPG

 

Yellow 240z

IMG_5613.JPG.c1266d42a59e7dab317457a7c86cfee4.JPG

 

 

 

IMG_5614.JPG.4cefb9bbdf3276ba603ba827adb4f455.JPG

 

Interior

IMG_5618.JPG.ff867efcc3be6396e95b93ce8d83f1c0.JPG

 

 

Roll Bar in Deck

IMG_5617.JPG.2fb3071e8316838916b2ace4dd66a708.JPG

 

Engine Compartment

IMG_5619.JPG.98bb008d5f9c36ad391709dd30e4ec3b.JPG

 

Tri[ple Webers Carbs

 

IMG_5622.JPG.44c3f99901df6baa3d2fe591327403dc.JPG

 

This Z Car was build in "Snow Country" -Canada probably costed than 30% more because of that 

alone.

 

K truck

IMG_5743.JPG.2f66ec27cd0b1a65dfa1204c32ccd4a6.JPG

 

This Blue 240z was in the Battle of The Builders entries.   It was powered with Blown LS motor

 sticking through the hood.

Rear View-modified Tail Lights, custom Spoiler and Rear Chassis Deflector

IMG_5602.JPG.5dfd72498f9b264cce5f09c3f6daf416.JPG

 

 

IMG_5604.JPG.9f0e36d407aff08877e8e23b35f58769.JPG

 

interior

IMG_5603.JPG.34326e7321a7a1a579dd20a7d1526d09.JPG

 

IMG_5746.JPG.c1a17edba0f3eb10441ae370b4ae967d.JPG

 

It has a small Blower on a LS motor with square tubing front frame and custom strut mounts.

 

240Z Radio Controlled Car

IMG_5629.JPG.c599bd7211292d55736bd137595d7b13.JPG

 

 

 

IMG_5630.JPG.6b4b2e550382d8f72e9171758c376fab.JPG

 

Fully Carbon Fiber 240Z

IMG_5656.JPG.e1475ef8df0e6bd4eceac9317cddd64a.JPG

 

Video of Drifting Demo by Three Mustangs

 

https://youtu.be/EM2YtruqQwQ

 

 

 

 

Next- Replacing Precision Weather Stripping

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IMG_5655.JPG

 

Edited by toolman
text and pic corrections
Link to comment
Share on other sites

16 hours ago, toolman said:

Super Clean Green 240Z

 

IMG_5700.JPG.2ec59cb87d1ecddc22fb975e7625fd71.JPG

 

Yellow 240z

IMG_5613.JPG.c1266d42a59e7dab317457a7c86cfee4.JPG

Any more info on these cars? Do you know who built them? I've googled and can't find anything on the green car. 

 

Edit: I've now found that it was at the Toyo Tires Treadpass Booth, and some additional photos of the car, but still no sign of who built it. It has Apex's Track Attack Kit on it, can't be too many of those around. 

Edited by rturbo 930
Link to comment
Share on other sites

rturbo930,   

       I found one more pic of the Green 240Z at the Toyo Tire Booth.   I did recall any sign near the car with more information, though.   I hope this pics help you..

                                   Toolman

 

looks like it has Apex Engineering  Time Attack rear suspension

 

IMG_5618.JPG.aef3bb17b46a5cc1bd097e43a0708a4e.JPG

 

 

Edited by toolman
correct text and pic
Link to comment
Share on other sites

  • 1 month later...
Posted (edited)

Replacing Precision Door Weather Stripping

 

   I found out that the Precision Door Weather Stripping was not doing its job.   It seemed too hard and not sealing the

interior from air leakage.   Even after adjusting the Upper Chrome Window Channel  inward to the Maximum Adjustment.

So I decide to look for a Weather Stripping Replacement.   I found an Univerisal Automotive  Door Weather Stripping gasket on Amazon.

IMG_0029.JPG.68d36c88940cc2c7241160250e636c4c.JPG

 

 

 

Two of these Univerisal Weather Stripping Gasket are needed for both sides(Left and Right.   This Gasket was soft but large to handle large door gaps.   This style of weather stripping is used on most late model vehicles.   The only problem was the 240z has a Right Angle-90) degree on the Upper Rear Corner of the door opening.   The gasket was made for Slow Sweeping Corners.  So some fabrication of the weather stripping would be necessary;

Pic of Precision Corner Section which made by Vulcanizing rubber to create the Right Angle section.

IMG_5779.JPG.e4c6465d0e4712805df981cd90fcda38.JPGPrecision Door Weather Stripping gasket

 

    First, A DoorTemplate had to be created to make the Right Angle Corner Piece which will hold both ends of Weather Stripping.  This template will be used only for the constrution for the Right Angle Rubber Weather Stripping  portion.    A Corner Template made of 22 gauge sheet metal will be made to hold the two parts of the Corner Weather Stripping.   This thin sheet metal right angle piece will inserted into in the slots of the each end of weather stripping.  After Trial Fitting, this piece will glued with E6000 to fasten both ends of weather stripping forming the Right Angle or Corner Piece.

IMG_5761.JPG.c760ff814531b4a6e413c4b4083eeb13.JPGTrimming of Connector piece to Fit..

 

The Connector Template inserted into both  Weather stripping ends to Corner piece.

IMG_5762.JPG.7a06c0537bea75d101e2c6bc5aa0ebd2.JPG

 

A Foam Square was cut out of 1/2" Soft Foam to fill the Corner Gap between the Two Weather Stripping Edges.  Note, this Right Angle Connecting piece  will become a permanent part of

the weather stripping after glued all together(connector piece, Foam Filler and both Edges of 

Weather Stripping} with E6000 adhesive.

 

Test Fit of Weather Stripping on Door Template without Corner Connector.  This Template is flipped

over to create the opposite( Left) Door Template.

IMG_5992.JPG.367945c09664885be01f8d213cd12afd.JPG    r

 

   The Best Rubber Adhesive that I found is E6000.  It is made by the same manufacturer makes

Shoe Goop.   It can be found on Amazon.    If you ran a bead of E6000 on piece of wax paper and let dry hard.   Then, peel it off the wax paper and you can stretch it 3 times its original size!!   There are two versions of E6000 -low viscosity and high viscosity.   It depends if you want the glue to fill in gaps or stay on the surface.

IMG_5791.JPG.45a7a37b98b6f7ee6a73c50c417dd6b5.JPG

 

Interior View of the  Door Template with Weather Stripping installed

IMG_5769.JPG.328f230f72f02a66c4619a3fb9826214.JPG

Note-a Right Angle Corner Bottom Piece was made from 1/16" rubber sheet which is glued to lower side of the Right Angle Connecting piece to provide a Bottom Sealing Surface.

 

Exterior View of the Corner Section

IMG_5778.JPG.cc44d95d05fe9fb192000b0afa8bab6b.JPG Test Sample Section

Note-Foam Gap Piece installed.    E6000 is used to attach both weatherstripping edges to the Right Angle Connector and later gaps and edges will be filled with E6000 to prevent water intrusion.

 

Top View of Weatherstripping Corner

IMG_5775.JPG.1b744abfeae7a196aefc979d635f6316.JPGTest Section without Construction Template

 

 

Testing Weather Stripping by shining Fashlight along  window sealing edges

IMG_5773.JPG.50ae7c18b9c85bc4429f90af4440c24a.JPG*Light shining through area with no gasket

 

 

 

Right Side Door Weather Stripping installed on vehicle.

 

IMG_6007.JPG.922c7f3e01885943376ab8f68b9c1844.JPG

 

I have not Road Tested the car to check for Air Leakage or Water Leakage yet.   Will let you

know the results of both tests when they are completed.

IMG_5763.JPG

Edited by toolman
text and pic corrections
Link to comment
Share on other sites

On 11/12/2023 at 4:22 PM, toolman said:

rturbo930,   

       I found one more pic of the Green 240Z at the Toyo Tire Booth.   I did recall any sign near the car with more information, though.   I hope this pics help you..

                                   Toolman

 

looks like it has Apex Engineering  Time Attack rear suspension

 

IMG_5618.JPG.aef3bb17b46a5cc1bd097e43a0708a4e.JPG

 

 

He’s on Instagram, corrupttbuilds, he also built an older mustang with a Ferrari engine

Link to comment
Share on other sites

  • 1 month later...

  i will discuss my Interior Modifcations created to add to the "Race Car" Imagine of 240Z Restro Mod.

 

Using Dimple Dies -

    Dimple Dies are used regularly in Race Cars to strengthen and at same time lighten vehicle weight.   Dimple Die tools are basically a Male and Female Round Hole Dies.   In the center, a Bolt is used to squeeze the sheet metal into a Reinforced  Round Hole.

 

IMG_5323.JPG.f9f773555aac61b46bc8efe985247aec.JPG

 

Completed Dimple Die Panel

IMG_5819.JPG.ae90eeae68e68be821b7632bdc5eb314.JPG

 

To create Upper Strut Tower Covers, A Paper Template was made First.

IMG_5832.JPG.3c7e78087983c7d01ac3cd0fa83321ff.JPG

 

Strut Tower Brace  Covers  with a Polished Aluminum Rear Deck Plate

IMG_6096.JPG.17d780b6bff140b024d19657f59826d7.JPG

 

Rear Hatch Area also Large polished Aluminum Pan was added.

 

 

 

Another view of the Hatch Area

IMG_6044.JPG.2314c0d711d3f44ce6693ef062b33a37.JPG

 

 

Interior Mouldings

Front Passenger Side Interior Moulding

IMG_6084.JPG.47070e52e45d942e2d3c23ad3ae15bff.JPG

 

Front Driver Side Aluminum Moulding

IMG_6085.JPG.ec0058adaffb4f5bdae599142c4090cc.JPG

 

Lower Interior Rocker Panel Covers

IMG_6094.JPG.d26abb066ccea4c98da2e83f9bf01506.JPG

 

 

Dimple Die Panel installed on Right Rear Quarter Panel

IMG_5980.JPG.a89a7d82686ff47c3dc320dd0fd96541.JPG

 

Aluminum Door Panels

 To install Aluminum Door Panels on a 240Z took more work as the interior side of the doors are not flat as most cars are.   They were constructed this way because of the confined inteirior area.

 

Trial Fitting of the Non Polished Aluminum Door Panels

IMG_5873.JPG.c33ccd8aaa0bc5cb846cbb7ea094c5b5.JPG

 

This Test Determined that Spacers are needed because of the "uneven interior door surface'.    A Straight Ruler.   It shows that  3/4" spacers are required to attach the Door Pull Handles'

 

IMG_E6026.JPG.c0049ea2fd5eff24f8f785c1b2912ae9.JPG

Note-Three Black Round Plastic 3" Spacers glued to the Door Skin with JB Weld.

 

The Other Problem is the Window Crank Handles is be extended by about 1/2" longer for clearance to operate.

A Extra Window Crank Handle must be use to cut the Spline End off to extend the shaft.   A Hole Saw is used to remove the shaft off the crank..

 

 

The  1/2"Cutoff Section is attached to the Original Crank Handle with JB Weld Adhesive.  This will allowe the Window Crank Handle to "clear" the Door Panel.

     Also, Other Modification that must be made to the Door Release Mechanism.to function properly.

     First, the Aluminum Panel must cut out to mount the Door Release Mechanism.

IMG_6024.JPG.8550c8759f1bcc954a97023107313838.JPG 

A Dremel Tool was used to perform this task.

 

Also, the Door Release Mechanism itself must be"Tilted upright" in it mounting position.    This is accomplished by fabricating Triangle shaped wood blocks under the bracket.

IMG_6025.JPG.8d601ae4b050c00f4fcd7babe0976a27.JPG

Oak Blocks was used for its strength ,avaiabllity. and ease to fabricate.

Two Longer 6mm x1.0  bolts are necessary due the Wooden Blocks.

 

IMG_6027.JPG.b63737f61e5c9b2681dcdcc3c7096c10.JPG

Door Release Mechanism installed

 

Window Crank Modification

Using  a Hole Saw, a section of an extra Window Crank was removed.  This section

was filed down so the core portions would match for sectioning.

IMG_6028.JPG.b72a02df44c89708e93de91a32ae8e88.JPG

 

Window Crank Handle Extension joined using JB Weld 

IMG_6029.JPG

 With this 1/2" Extension, the Window Crank Handle has enough clearance to operate.

 

Aluminum Door Panel now Completed-

IMG_6014.JPG.7318faf08a952678c8c286674c0cac87.JPG

 

 

Drivers side Door Panel

IMG_6031.JPG.ebbbaee93cc7f55f75f210980327a36d.JPG

 

Fastners Used

 

All of the Dimple Die Alumunium Covers were fastened using Rivet Nuts and Small Machine Screws

(4MM x o.7 ). The only exception were The Upper Interior Aluminum Covers were fastened with 1/4"log Phillips Screws.

 

Radiator Support TopCover

I also added a Aluminum Dimple Plate to hold  a 1/4"x 4" wide Rubber Strip which seals the Hood and Radiator Support Area.  This Seal directs more air through the radiator.   Right now, the Water Temperature runs 193 degrees and up to 200 degrees with AC running.

IMG_6087.JPG.d98482ec27004a23d405e9c1b69b7740.JPG

 

Hatch Interior Cover

  A Polished Aluminum Flat Panel was attached to the bottom side of the Hatch.  It was attached with Plastic fastners.

IMG_6097.JPG.0ce05468d75ecaefee5e3beda71fb003.JPG

 

 

Next Topic-Rust Proofing the Vehicle

 

 

Edited by toolman
text and pics corrections
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...