Jump to content
HybridZ

Stock rear spindle/knuckle needed


zboi

Recommended Posts

So my spindle pin won't come out of my knuckle assembly. I put it in a press and it is bending the rear control arm instead of pushing out the pin. Wondering if anyone has a knuckle I could use, don't need any bearing or stun axle or anything just the bare knuckle assembly. Passenger side.

Link to comment
Share on other sites

The threads got mashed from being beaten on and pressed, and then I welded a rod to them to try to twist it so it would break free and it just snapped the bolt. This thing is seriously stuck in there bad.

Edited by zboi
Link to comment
Share on other sites

Do you need the whole strut? It sounds like you may need the A arm too.It's to wet today but I think Saturday is going to be nice.

If you want to pull the parts I will let you have the strut the A arm and the axle for $65

Edited by 72240Z
Link to comment
Share on other sites

Do you need the whole strut? It sounds like you may need the A arm too.It's to wet today but I think Saturday is going to be nice.

If you want to pull the parts I will let you have the strut the A arm and the axle for $65

I'd take you up on that. My only concern is what if the pin is frozen real bad in that one too. Its a fair bit of work getting all that taken off.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...