Jump to content
HybridZ

L6 DIS Brackets (LSX) Are Available Once Again


ThatOneZ

Recommended Posts

This is a rerelease of RTz's coil bracket under his permission.

Since he is not producing them anymore and zccjdm is gone I would like to bring these back to the community.

Please read this post in its entirety before ordering. If there is anything unclear, please ask.

 

brack1.jpg

.

.

texture.jpg

.

.

BareCoilBracket.jpg

.

.

HintzCoils_bracket.jpg

.

.

BarntsCoilsA.jpg

.

.

MikeHintzCoils.jpg

 

 

Block mounting points...

 

coilbracket.jpg

 

Made from 3/16" 6061 Aluminum.

 

Mount Price: $99 shipped anywhere in the US.

If outside the US, PM for pricing.

 

1. Price does not include coils.

2. Mount will require rerouting heater hose.

3. The mounts come with a light DA sanded finish as shown in photo 2. They are ready for paint, or polishes with minimal effort.

4. Included hardware... stand-offs and S.S. bolts for mounting to the block. All extra hardware not included.

5. Coil Part Number: 12558693, or 2000 Chev. Suburban 5.3L

6. Connector Part Number: 12582189 (connectors only come in batches of 4, as a sub-harness)

7. Coils known to work with Wolf3D, Haltech, Motec, J&S, and Megasquirt. It's up to you to know if and how they will work with your specific EMS.

 

 

 

Coil Schematic...

 

CoilPinOuts.jpg

 

 

Pin A... can be grounded to the block, but my recommendation is the head.

 

Pin B... needs to be grounded at the same location as the ECU.

 

Pin C... to ignition channel.

 

Pin D... provide a good 12 volt power source (with key 'on').

 

Begin with 3.5ms dwell. Test and tune for best ignition performance.

 

For ordering send a PM or post here.

Thank you everyone.

Edited by ThatOneZ
Link to comment
Share on other sites

  • 2 months later...
  • 2 weeks later...
  • 9 months later...
  • 1 month later...
On 7/24/2018 at 2:15 PM, Ben's Z said:

Sent you a PM

I have sent a couple of PM's my guess is hes busy or not doing this. If hes not doing this anyone have  the file I could cut them locally I could use a set for my ls coil swap.

Link to comment
Share on other sites

  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...