Jump to content
HybridZ

Suspension issue please help


Recommended Posts

Hey guys I was trying to figure out what would cause my drum brake on the rear to tilt in towards the body of the car with with the side of it going inward towards the driver door. Is there anything to adjust this? The wheel toe is inward only on driver rear

post-54890-0-67619100-1503876939_thumb.jpg

Edited by JDs78
Link to comment
Share on other sites

Thank you for the reply one thing I did notice was that the rear strut tower on the passenger side was closer to the frame of the car. On the side I was having the issue the strut tower was pushed outward more away from the frame of the car

Link to comment
Share on other sites

You can do the struts without taking the control arms off. You can take the control arm off with the strut to change the inner bushings, too. But when you take the strut off of the control arm, you're entering a forbidden realm. Beyond this place, there be dragons. 

Search "spindle pin puller" if you want to save a whole lot of hassle. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...