Jump to content
HybridZ

280Z Replace floor pans while leaving in seat brackets


Recommended Posts

I have seen this topic briefly mentioned, and also seen a 240Z video showing this. I think the seat bracket mounting is different between the 240Z and 280Z.  If it is possible, I would like to leave the brackets in place.  I've started removing the floor, and I'm not yet sure if it is possible to remove the floor pan spot welds to the inner rocker panel in the vicinity of the seat brackets.

 

Thanks in advance

 

Link to comment
Share on other sites

Thanks guys, I think I was literally looking at this from the wrong angle.  Parts of the floor pan will be easier to remove from underneath.  I should have realized that last night while drilling out some of the seat bracket-to-floor pan spot welds from underneath, but my arm was so tired it was about to fall off.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...