Jump to content
HybridZ

Transmission Tunnel Measurement for 240z


Recommended Posts

Hey guys,

 

Kind of a random request. Does someone with a 1971 or 1972 240Z have easy access to measure the length from the firewall to the bolt holes of the stock cross member? Just in a forward to aft measurement like straight from the trans crossmember bolt hole to the firewall if say you put a piece of wood or something that spans the tunnel gap. 

 

It should be between 16 inches to 23 inches. I'm thinking it is almost in the middle of that at 19.5 inches.

Link to comment
Share on other sites

It would have been so easy to grab it before I cut the tunnel out...I was just so tired though that it slipped my mind. 

 

I think that won't work as I trimmed the panel quite a bit so I doubt the pieces will fit. I really need to just crawl under the car and find out.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...