Jump to content
HybridZ

Fuel sending unit question HELP!?


Recommended Posts

Hey guys,

 

I own a 76 280z and recently purchased a intellitronix fuel gauge. The gauge only reads the following ranges.

 

73 to 10 ohms

0 to 90 ohms

10 to 180 ohms (or 0 to 30)

And 240 to 33 ohms

 

From my research, it appears that our stock fuel sending unit is 90ohms empty 10ohms full. The closest range appears to be 73 to 10. Will that give me close to an accurate reading or is there a sender I can use with the stock tank to make this work? any ideas would be great thanks!

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...