Jump to content
HybridZ
ZT-R

Skyline Chassis Dimensions

Recommended Posts

Racinjitter    10

Sorry it is a little jumbled, cut and paste...Hopefully this is what you wanted.

 

 

bodyworkType2+2 FHC

Designer

Number of doors2

dimensions & weights

Wheelbase2720 mm107.1 in

Trackfront1486 mm58.5 in

rear1490 mm58.7 inLength4675 mm184.1 in

Width1780 mm70.1 in

Height1360 mm53.5 in

Length:

wheelbase ratio1.72

Ground clearance145 mm5.7 in

Kerb weight1530 kg3373 lb

Weight distribution

(Front)Fuel capacity65

litres14.3

UK Gal17.2

aerodynamics

Drag coefficient

Frontal AreaCx

engineCodeRB26DETT

Manufacturer

NissanTypeS-6 DOHC

24 valves total

4 valves per cylinder

Main bearings

Construction

Bore × stroke86.00mm × 73.70mm 3.39 in × 2.9 in

Bore/Stroke ratio1.17

Displacement2569 cc (156.77 cu in)

Unitary capacity428.17 cc/

cylinderCompression ratio8.50:1

Fuel system

EFiAspirationTurboCompressor

typeIntercoolerY

Catalytic ConverterY

Max. output

(DIN)279.8 PS (276.0 bhp) (205.8 kW)@6800 rpm

Max. torque (DIN)368.0 Nm (271 lbft) (37.5 kgm) @4400 rpm

Maximum rpm

CoolantWater

Specific output107.4 bhp/litre1.76 bhp/cu in

Specific torque143.25 Nm/

performanceNote:A value of -1 means that

the car cannot attain that speed.

0-50mph (80 km/h)

0-60mph5.00s

0-100km/h

0-100mph13.00s

80-120km/h (50-70mph) in top

0-Quarter-mile13.70s @ 102.00 mph

0-Kilometre24.70s @ 211.00 km/h

Top speed249 km/h (155 mph)

Fuel Consumption

CO2 Emissions

Power-to-weight180.39 bhp/tonchassis

Engine location

FrontEngine alignment

LongitudinalSteeringrack & pinion PASTurns

lock-to-lock

Turning circle11.40 m

SuspensionFrontI.MultiLi.CS.

RearI.MultiLi.CS.

Wheels F/R9.0JJ x 17/9.0JJ x 17

Tyres F245/45 R 17Tyres R245/45 R 17

Brakes F/RVeDi/VeDi-S-ABSBrake ∅ F/R324/300 mm

Braked area

Transmission5MDriveAWD

Top gear ratio0.75

Final drive ratio4.11

generalNumber

madeModel

CodeBNCR33

Model Family

Share this post


Link to post
Share on other sites
HakosukaJD    10
do u have the same figures for the engine bay of the 240' date='260,or 280z...the ones in the other forum dont have that many measurments for what i need.

thanks[/quote']

 

That one will be a bit harder....I'll check through all my "Nostalgic Hero" magazines and see if I see it anywhere....

Share this post


Link to post
Share on other sites
stony    11

the dimmensions like they have in the sticky in the chassis forum for the 240z would be prime.... but manily the engine compartment dimmensions

 

 

ZTR where is this thread you mentioned? i cant find it. im comparing some measurements to see what can stay and what would have to go if i built a front clip to mount the GTR front suspension.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×