Jump to content
HybridZ
AE2ZX

L28e To L28et Swap

Recommended Posts

DID a bunch of cleaning today the shop needed it...it was out of control .

gray got his 300zx hood scoop installed on the ae86 .will post a pic in the moring , it was to late to take one by the time we finshed up .got the blocking plate made for my egr holes . i made one for the other spot but , i mite make another i dont like how it turned out ..got to grind out the intake hole in the moring .and throttle corner then get the intake all sealed up with some fittings , pop off vavle and other spots ..a clean shop is a friendly shop so tomarrow should go eazy with everthing in its place and eazy to find :burnout:

Share this post


Link to post
Share on other sites
Guest grey_turboae86

thats my girl right there!!!

 

and to all Z owners!! esp you Yasin....

 

glad to be cruisin around this place, a lot of people have some really nice rides on here, and i really appreciate Z's. As seen there is my turbo AE, that is all to be said

-marc

Share this post


Link to post
Share on other sites

got all the spots sealed up on the intake ..plates are made and sealed ..have to wait untell the moring to put the throttle body back on ..the part store here had to order the 89 240sx throttle body gasket they didnt have one in stock ..once thATs on then the intake should be done.

Share this post


Link to post
Share on other sites

Wow beautiful AE86...there is car that is truly miss...I built some wicked ones in my time and this is THE first time in over 10years I do not have an AE86...someone give me a hug...here is my last sweetiepie (I know shameless plug)...

 

BTW grey_turboae86 - Do we know each other and any specs you can share on your beautiful car?

 

89877345.jpg

 

89877319.jpg

 

89873299.jpg

 

89870527.jpg

 

52786557.jpg

 

86833333.jpg

 

Yasin

Share this post


Link to post
Share on other sites
Guest grey_turboae86

Yasin- When you were on club4ag and i was starting this setup i was asking you some questions, and my sign on name was silver_hatch2. dunno if you remember me, but i definately remember your car, and glad to see you here... how is your red porsche?

 

specs on my car are:

87 sr5-gts full conversion with stock disc-disc LSD rear end

fully rebuild late model ae92 GZE

trd metal headgasket, ARP head studs, big port head

t25 sr20det turbo, starion front mount intercooler

365cc GZE injectors, STOCK ECU!!! (runs good actually)

no tvis, fully 2.5 inch mandrel exhaust, with high rise manifold

with my old hks top mount setup and 7 psi on a tiny z32 tt turbo was 170 to the wheels.. with this new manifold and bottom mount turbo at 10 psi with starion front mount it is easily putting 190 to the wheels!! this thing is fun to drive, and virtually no lag.. perfect drift setup for me

 

t3 front coilovers with 400 lbs rates, kyb agx's

stainless steel brake, clutch and diff line

illegal garage clutch, and t3 5 link

front, and rear strut bars

no interior and a bunch of autometer Z series gauges

and of course the newly aquired 300zx turbo hood scoop.

oh ya 14x7 -9 rewinds (obviously) ae92 skirts custom boyeee

Share this post


Link to post
Share on other sites

got the intake all done up .also took care of the water thermo housing .now off to other things:burnout:

 

intakedone005.jpg

intakedone004.jpg

intakedone003.jpg

intakedone002.jpg

 

:icon44:its moving right along ..soon as my dissy comes and turbo gasket

then iam really going to need a turbo!!! then clutch and pick up the flywheel .

after that i will be able to putt it all in ...

- removing my motor and paint my bay ..

soon very soon ...mabe middle of next month

mabe next week!!! if i had all the parts it would be today !

 

rhrhrhrh shhshshsshshhs rhrhrhrhrhrhrhrhrh shshshshhshssh !!!!!! turboo drivennnn

Share this post


Link to post
Share on other sites

Grey - I vaguely remember you...my memory is slipping! Pardon me!

 

Anyhoo...awesome set-up. I really like the T25 and your 190whp seems to be spot on. Starion IC is also a nice piece as well. Great set-up. So are you running the GZE AFM?

 

Whats new over at club4ag these days, I have not been there in ages.

 

Yasin

Share this post


Link to post
Share on other sites
Guest grey_turboae86

:flamedevi looks like everything is slipping into place very nicely ZX... and clean too!!

 

the electronics in my car are all bluetop, so no gze ecu...

 

club4ag is well club4ag... i tend to browse and find useful topics, but rarely post unless something someone is doing bothers me or they want advice.. lol

 

i stick to hachiroku.net more

Share this post


Link to post
Share on other sites

turbo turbo TURBO...went on a parts run to a few junk yards this eveing ..no luck:icon56: ...call my little brother because i was over in his town ...tell him iam looking for a turbo and he is like why didnt you call me frist ..lololol i got a t3 turbo on my 89 saab 9000 just sitting out back.. :shock: i about [email protected]#% my self ...

so i go over thinking it wont be the sameone i need .. turns out IT IS ! .

it took five of us three hours to get that beast off but it was worth it

FOR SURE...

$50 bucks:icon43:it has NO shaft play .....its almost the same in every way the saab T3 is water cooled :icon44: so i will have to figure out a water system :icon44:

i will have to swap wastgates "sorry Bleach" :(..also i will have to reclock it

but that so eazy:icon43: .... Gray gots his turbo stuff on lock

THANKS GRAY :twisted: RED J :icon28: AND BLACK BUG :trippen:YOUR ALL SUPER SAVAGE WITH THE HELPING HANDS !!!!

so ya super stoked out. :cheers:

pics in the moring mid afternoon for sure :burnout:

Share this post


Link to post
Share on other sites

Good job on that throttle linkage. You're an engineering genious! :D

 

nice find on the turbo as well. Go ahead and get yourself all set up. I'll keep an eye out for a local turbo or wastegate.

 

I finally fixed my main engine problems. Sealed up the injectors to the manifold by using proper holders.

Share this post


Link to post
Share on other sites

well reclocking that wasnt as eazy as i thought it was going to be ..

took forever dam thing didnt want to break free:twisted:...

but its done and test mounted looks good :icon44:..still need to do some cleaning

and make the water lines work ..oil lines bolt up well ..i have to run down tO PT and cut the down pipe off the saab and use it.. not to big of a deal just more work .i also will have to mod the stock zx actuator arm just a little .

looks great super stoked :icon43:..but iam pretty tired and need a little break :wink:be back late:burnout:

 

 

turbo003.jpg

turbo002-1.jpg

turbo004.jpg

turbo005.jpg

 

Thanks bleach ! looks like the wastgates are just a little differnt ..

i will need the actuator but not the wastgate its self or my stock down pipe .

so its all yours if you want it :)

Share this post


Link to post
Share on other sites
Guest grey_turboae86
:twisted: this is childs play :emo::emo:.... hahaha

Share this post


Link to post
Share on other sites

went down to get my down pipe and stoped at the meeting of the minds zcar meet ..it was pretty tight not that big of a turn out all the way up here , but it was chill .Bleach thanks for all the info and tips on the swap stuff your z is looking prime :burnout:

mettingoftheminds2006030.jpg

mettingoftheminds2006020.jpg

mettingoftheminds2006034.jpg

mettingoftheminds2006018.jpg

mettingoftheminds2006016.jpg

mettingoftheminds2006010.jpg

mettingoftheminds2006009.jpg

mettingoftheminds2006008.jpg

mettingoftheminds2006007.jpg

mettingoftheminds2006005.jpg

mettingoftheminds2006001.jpg

mettingoftheminds2006039.jpg

mettingoftheminds2006041.jpg

mettingoftheminds2006042.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×