My Complete LS1 Install Documemtation with Pics

[Guest Grenade300]

Ok guys, for all the info I got from this site it's time to give something back. I documented my entire LS1/T56 install using the JCI kit from start to running. I put it all in a MS word document as I went along. It contains 56 pics of the install and a pretty detailed write up to include the part number of the NAPA serpentine belt, how to overcome the GM T56 clutch connection. But the file is huge. Almost 40MB.

 

edit - I was e-mailing this file out, however, I found it will be easier if I just put it on a file server. Here is the link http://www.megaupload.com/?d=GEBNOIGW. All you need to do is go to the link. At the top of the page you will need to punch in the 3 letter code displayed (usual anti-hacker thing), wait for the 45 second counter to reach 0 and then click the "free download" button. That will download the file to your computer.

 

This took a lot of time to write up so I hope somebody uses it.

 

This write up only covers my experiences installing my LS1/T56 with a fuel cell, stand alone engine harness and no A/C

 

Thanks,

Scott

 

Edit: I managed to size down the pics and still keep great quality. The file is now only 3.5 MB. As per the advise of "Bschiltz" in a below post, I am removing my e-mail address. If you want a copy then just send me a PM with your e-mail address.

[MY77Z 10]

Hi Scott,

i will be more than greatfull if you send it to me, a friend of mine here in kuwait has a 280z shell and thinking about getting a LS1/T56 drivetrain, your copy will help us out alot

my email: abu_allail@hotmail.com

thanks again for making our lives easier

[Hayabusa 11]

This write up only covers my experiences installing my LS1/T56 with a fuel cell, stand alone engine harness and no A/C

 

Hi Scott, please send the info i'll need help for my project and this would give my some valuble insight,Thanks Wallace -email is ws6854@aol.com

[ramblinon9 10]

hi scott,

I would greatly appreciate if you could send me a copy of your booklet to me as well. my email is americanidiot949@yahoo.com

thanks a lot

-Christian

[COZY Z COLE 375]

I'm making this a sticky and maybe it will save-some of the repeat questions being posted on this conversion.

 

LARRY

[Mrtemp 0]

I'd appreciate a copy as well. My email is tempuraman@hotmail.com

 

Cheers!

[240Z28 0]

Scott,

Sounds like something all of us contemplating the LS1 install needs to have. Thanks for taking the time to provide it to us. Please email it to me at epfmotorsports@cox.net

Thanks.

[bschiltz 110]

I'd like a copy as well. Thanks a ton for doing this!

 

One thing to note, guys. Posting your email address in open forum is a good way to get spam mail. Web crawlers search for any potential email address and try to send spam to it. PM is the way to go.

[Plague_oc 10]

edit, sending pm

[Guest Grenade300]

Ok guys, I got a lot of PMs and e-mails, so I sent the documemtation out in one mass e-mail to several recipeints, I THINK I got it out to everybody.

 

If you asked for a copy and did not get on, just shoot me a PM and I will get it to you ASAP.

 

Constructive critiscism and advice is always welcome.

 

Thanks,

Scott

[gdv350ss 1]

Scott,

 

Thanks for sharing your build-up and taking the time to document it. This will surely be a great benefit to those of us who are about to began our own projects. Please send a copy to gdv0412@comcast.net.

 

Thank you!

[digipalms 10]

Me too. thans pennysaver1@verizon.net

[Plague_oc 10]

thanks for writing that up! very helpful

[Slow_Old_Car 10]

pm sent

[jbk240z 10]

Me too, pm sent.

[Hayabusa 11]

Thanks very helpful!

[proxlamus© 2]

oh me me! rdritlei @ mscd (no spaces)

[Guest Abner]

Thanks for sharing. pm sent

 

Just a suggestion: Have you thought about uploading to a free file server like megaupload.com? Its a good way to share a single file with lots of people without sending out dozens of emails.

[JustinOlson 13]

Send a copy my way:

 

JustinAOlson @ gmail.com (without spaces)

 

Regards,

Justin

[TravRMK 10]

I would love a copy of this. I sent you a PM with my adress.

[Phantom 36]

Any way to just load it up on this website so folks could peruse as desired?

[Guest Grenade300]

Whew! I hod no idea the response on this would be so large!!! I'm thrilled so many people want a copy.

 

Abner - I think I will take your advice about the free file server, that way I can make updates to the document and just re-post it on the server.

 

REMEMBER, If you want a copy, send me a PM WITH YOUR E-MAIL ADDRESS. I am getting a lot of PMs with no e-mail addresses in them.

 

I think I got a copy out to everybody who requested one, but if I missed somebody, then just shoot me a PM.

 

Glad to help out,

Scott

[jbk240z 10]

I got my copy, thanks alot!

[Joedatsun 0]

I would love a copy as well.

 

lahieres@patmedia.net

 

 

Thanks

Joe

[tfreer85 20]

I'd like to get a copy myself. tyson.freer@gmail.com

 

Tyson