Jump to content
HybridZ
Apex944

Elk Grove, CA Lot's of L28 and L24 part's as well as interior and so on

Recommended Posts

Ok, so rather than bumping my old thread that seemed to just confuse everyone I decided to make a new thread instead with all of my current part's that are for sale.

 

 

 

P30 L24 block with the crankshaft and main's still bolted in, no rod's, piston's, etc... Just a P30 block and crankshaft with all the main cap's and bearing's. $30 pick up only

 

2405632060100900994S600x600Q85.jpg

 

 

4 speed transmission also from a 1972 240Z that seem's to be in good shape. $30 pick up only

 

2942511660100900994S600x600Q85.jpg

 

 

Quarter glass with the chrome in good shape. $40 shipped for both side's

 

2170559710100900994S600x600Q85.jpg

 

 

R180 Differential in great shape. I have not confirmed it yet but I believe it is the 3.2?? that came in the standard 240Z. $30 pick up only

 

2599251430100900994S600x600Q85.jpg

 

 

Black plastic inner tail light panel in great shape- $45 shipped OBO

 

2585180390100900994S600x600Q85.jpg

2952336810100900994S600x600Q85.jpg

 

’73 front bumper with brackets but no over rider's, in good shape, a few ding's- $60 pick up only OB

 

2074553700100900994S600x600Q85.jpg

2951667450100900994S600x600Q85.jpg

 

 

’71 rear bumper with over riders in OK shape, need's straightened- $40 pick up only

 

2402006680100900994S600x600Q85.jpg

 

 

Red upper interior plastic panel that the dome light sit's into, in great shape- $35 shipped OBO

 

2001828740100900994S600x600Q85.jpg

 

 

4 screw SU Carb setup with N36 intake manifold, linkage, uniflow air filters as well as the heatshield plate that the carb springs attach to. In great shape, they came from my running ’73 that I was daily driving. $160 shipped OBO

 

2294876440100900994S600x600Q85.jpg

2688091010100900994S600x600Q85.jpg

 

 

MSA twice pipe’s exhaust with less than 15k mile’s on it that I put on the car so it could be driven. I figure $70 OBO picked up is a fair price as it’s welded together as one piece and would be a pain to ship…

 

2638751110100900994S600x600Q85.jpg

 

 

L28ET webbed intake manifold with most of the vacuum pieces as well as the throttle body and TPS sensor and fuel rail with regulator. $80 shipped OBO

 

2464973420100900994S600x600Q85.jpg

 

 

L24 points distributor that I converted to Pertronix less than 5k mile’s ago so it’s like brand new. Worked great on my ’73. $80 shipped OBO

 

2425144210100900994S600x600Q85.jpg

 

280ZX electronic distributor with ignitor in what appears to be good shape $35 shipped OBO

 

2342079810100900994S600x600Q85.jpg

 

 

L28 N47 head N42 long block that came from my daily ’73 in OK shape but I would suggest a rebuild before dropping it into another car. Includes an assembled head and block, waterpump, oil pump, front cover and timing setup still installed but the chain fell ( was the last straw with this engine thus why it is for sale ) oil pan and valve cover as well as the waterpump pulley and crank dampener. $110 pick up only OBO

 

 

6 – 2 – 1 round port header, non-smog but has 1 oxygen sensor hole when it goes to the single pipe. In great shape other than some light surface rust like all un-coated headers get. $80 shipped OBO

 

 

Early style choke cable assembly in OK shape. The cable's are a bit stiff and the lever assembly is a little rusted but it is complete other than a knob for the lever and no firewall grommet. $25 shipped

 

 

E88 head in good shape with all of the valvetrain and camshaft as well as the oil spray bar. Came from a 1972 240Z and judging from the chamber design I would call it the 2nd generation of the E88 head's. It's seem's to be all original so I would suggest having it refreshed with new valve seal's etc.. before using it of course. $60 shipped or $30 picked up

 

 

Steering rack- $50 shipped

 

 

 

Passenger door with all part’s except latche’s and panel’s- $35 pick up only

 

 

 

Steering column- $40 shipped

 

 

 

Fuel tank from '71 240Z- $10 pick up only

 

 

 

 

 

 

 

If the item does not have "shipped" next to it then I will not ship so please don't ask if I will consider shipping it.

 

I also will not ship outside of the US, no exceptions sorry.

 

Also, I am LOOKING for quite a few certain part's that I would be willing to barter for if anybody has them. Remember, I am LOOKING for meaning I do not have these item's that are listed below-

 

Chevy small block part's

Small block chevy swap part's

Strut brace front or rear

Front lower valance

Over fender's

Passenger side pull strap with chrome finisher's

Fuel injection fuel pump IE Aeromotive or any of the other good brand's

Carburated electric fuel pump

Aftermarket fuel pressure regulator either fuel injection or carburated

Oil catch tank

Etc...

 

 

All item's are located in Elk Grove, CA and all prices are OBO.

 

Picture's will be up later tomorrow evening at the latest.

Edited by Apex944

Share this post


Link to post
Share on other sites

Are the 6-2-1 headers square port or round port? any pics?

 

D'oh forgot about that part...

 

They are round port as they are currently on an N47 head at the moment.

I also forgot to add that it does have some sort of EGR tube attachment on it that I capped off with a cut off bolt ( correct thread pitch of course ).

 

Here is the only picture that I have of it at the moment. I can take more tomorrow and post them in the evening.

 

 

http://inlinethumb24.webshots.com/45143/2322822790100900994S500x500Q85.jpg

Share this post


Link to post
Share on other sites

Awaiting pictures of the 240z front bumper, Hoping you'll ship it to me! ;)

 

Please read the sentence that is by itself towards the bottom of my first post.

 

 

Does the steering column have the ignition still on it?

 

 

Yes it does still have the ignition on it as well as a key that matches.

Share this post


Link to post
Share on other sites

I'll be interested by the steering column if it still avaliable. Good thing is I only need the mechanical part of it, no need for the switches.

 

I believe I've sent you a PM long time ago (April maybe), please let me know then :)

Share this post


Link to post
Share on other sites

I'll be interested by the steering column if it still avaliable. Good thing is I only need the mechanical part of it, no need for the switches.

 

I believe I've sent you a PM long time ago (April maybe), please let me know then :)

 

Unfortunately if you recall from that conversation we had, I do not ship outside of the US.

 

 

Picture's have been added (sorry for the long wait) as well as prices have been lowered.

Share this post


Link to post
Share on other sites
:( I'm not sure to understand the reason but I accept it. I've checked my PM, I don't have your answer anymore, sorry then if you feel I was insisting.<BR><BR>I'm travelling to the US in a month, maybe you can ship part to one of my friend in MI, I'll bring it back with me to Europe afterwards. What do you think? I guess we can deal with PM if you're ok.... Edited by Lazeum

Share this post


Link to post
Share on other sites

Part's Update:

 

280ZX 5 speed transmission in great shape with sensors. It is a FS5W71B Tybe B 5 speed transmission 1977-1983 non-turbo. $65 picked up only

 

 

1973 240Z Gauge set. Tachometer, speedometer, oil/water, fuel/amp's, no clock as it is broken like usual. $50 shipped for all gauges

 

 

1973 240Z top half dash cap in like new condition. $45 shipped

 

 

 

1973 Short tail fuse box in excellent shape- $40 shipped

 

 

 

P30 L24 block with the crankshaft and main's still bolted in, no rod's, piston's, etc... Just a P30 block and crankshaft with all the main cap's and bearing's. $30 pick up only

 

2405632060100900994S600x600Q85.jpg

 

 

4 speed transmission also from a 1972 240Z that seem's to be in good shape. $30 pick up only

 

2942511660100900994S600x600Q85.jpg

 

 

Quarter glass with the chrome in good shape. $40 shipped for both side's

 

2170559710100900994S600x600Q85.jpg

 

 

R180 Differential in great shape. I have not confirmed it yet but I believe it is the 3.2?? that came in the standard 240Z. $30 pick up only

 

2599251430100900994S600x600Q85.jpg

 

 

Black plastic inner tail light panel in great shape- $45 shipped OBO

 

2585180390100900994S600x600Q85.jpg

2952336810100900994S600x600Q85.jpg

 

 

’73 front bumper with brackets but no over rider's, in good shape, a few ding's- $60 pick up only OB

 

2074553700100900994S600x600Q85.jpg

2951667450100900994S600x600Q85.jpg

 

 

 

Red upper interior plastic panel that the dome light sit's into, in great shape- $35 shipped OBO

 

2001828740100900994S600x600Q85.jpg

 

 

 

MSA twice pipe’s exhaust with less than 15k mile’s on it that I put on the car so it could be driven. I figure $70 OBO picked up is a fair price as it’s welded together as one piece and would be a pain to ship…

 

2638751110100900994S600x600Q85.jpg

 

 

L28ET webbed intake manifold with most of the vacuum pieces as well as the throttle body and TPS sensor and fuel rail with regulator. $80 shipped OBO

 

2464973420100900994S600x600Q85.jpg

 

 

L24 points distributor that I converted to Pertronix less than 5k mile’s ago so it’s like brand new. Worked great on my ’73. $80 shipped OBO

 

2425144210100900994S600x600Q85.jpg

 

280ZX electronic distributor with ignitor in what appears to be good shape $35 shipped OBO

 

2342079810100900994S600x600Q85.jpg

 

 

L28 N47 head N42 long block that came from my daily ’73 in OK shape but I would suggest a rebuild before dropping it into another car. Includes an assembled head and block, waterpump, oil pump, front cover and timing setup still installed but the chain fell ( was the last straw with this engine thus why it is for sale ) oil pan and valve cover as well as the waterpump pulley and crank dampener. $110 pick up only OBO

 

 

 

Early style choke cable assembly in OK shape. The cable's are a bit stiff and the lever assembly is a little rusted but it is complete other than a knob for the lever and no firewall grommet. $25 shipped

 

 

E88 head in good shape with all of the valvetrain and camshaft as well as the oil spray bar. Came from a 1972 240Z and judging from the chamber design I would call it the 2nd generation of the E88 head's. It's seem's to be all original so I would suggest having it refreshed with new valve seal's etc.. before using it of course. $60 shipped or $30 picked up

 

 

Steering rack- $50 shipped

 

 

 

Passenger door with all part’s except latche’s and panel’s- $35 pick up only

 

 

 

Steering column- $40 shipped

 

 

 

Fuel tank from '71 240Z- $10 pick up only

 

 

 

 

 

 

 

If the item does not have "shipped" next to it then I will not ship so please don't ask if I will consider shipping it.

 

I also will not ship outside of the US, no exceptions sorry.

 

Also, I am LOOKING for quite a few certain part's that I would be willing to barter for if anybody has them. Remember, I am LOOKING for meaning I do not have these item's that are listed below-

 

Chevy small block part's

Small block chevy swap part's

Strut brace front or rear

Front lower valance

Over fender's

Passenger side pull strap with chrome finisher's

Fuel injection fuel pump IE Aeromotive or any of the other good brand's

Carburated electric fuel pump

Aftermarket fuel pressure regulator either fuel injection or carburated

Oil catch tank

Etc...

Share this post


Link to post
Share on other sites

i live in roseville, i would like to pick up the twice nice exhaust, and the 5 speed for 130, awwesome i have luvers for a zx if you have one, i also have a four speed tranny, a r180 whole rear end and a powersteering set up, and some other parts if your interested, nothing in the posted your looking for stuff unfortintly, if you have room ill trade you a complete rear and front end for just the transmission, and a nice hood off a 72 and a nice fender and an shaved intake for inection for the exhaust.... and ill give you the powersteering setup too.... my dads pissed i have his garage full of stuff, he has no room to drink beer. and pretend to work on his motorcycle.

Share this post


Link to post
Share on other sites

i live in roseville, i would like to pick up the twice nice exhaust, and the 5 speed for 130, awwesome i have luvers for a zx if you have one, i also have a four speed tranny, a r180 whole rear end and a powersteering set up, and some other parts if your interested, nothing in the posted your looking for stuff unfortintly, if you have room ill trade you a complete rear and front end for just the transmission, and a nice hood off a 72 and a nice fender and an shaved intake for inection for the exhaust.... and ill give you the powersteering setup too.... my dads pissed i have his garage full of stuff, he has no room to drink beer. and pretend to work on his motorcycle.

 

 

PM'd

Share this post


Link to post
Share on other sites

are the carbs still available? I'm thinking about comverting from fuel injection to carbs...tghey should fit on a 280ZX?...right?

 

Ray

 

 

Unfortunatly they have already been sold.

 

If you do find a set though they will fit your ZX as long as you can configure a way to hookup the throttle linkage and get a low pressure fuel pump and regulator set around 3 psi.

Share this post


Link to post
Share on other sites

Bump....

 

Updated part's list-

 

1971 240Z Front bumper in decent shape, will need some small ding's and dent's fixed and re-chromed but would be good enough to use for a Z that get's driven alot. $85 OBO pick up only

 

 

 

1971 240Z rear bumper in decent shape, like the front bumper it has some small ding's and dent's but is good enough for a car that get's driven and isn't a show queen. $60 obo pick up only

 

 

 

Pair of 240Z front fender's in good shape, some small surface rust but nothing major. $60 obo pick up only

 

 

 

Early style choke cable assembly in OK shape. The cable's are a bit stiff and the lever assembly is a little rusted but it is complete other than a knob for the lever and no firewall grommet. $20 shipped

 

 

 

P30 L24 block with the crankshaft and main's still bolted in, no rod's, piston's, etc... Just a P30 block and crankshaft with all the main cap's and bearing's. $25 pick up only

 

 

 

E88 head in good shape with all of the valvetrain and camshaft as well as the oil spray bar. Came from a 1972 240Z and judging from the chamber design I would call it the 2nd generation of the E88 head's. It's seem's to be all original so I would suggest having it refreshed with new valve seal's etc.. before using it of course. $50 pick up only

 

 

 

4 speed transmission also from a 1972 240Z that seem's to be in good shape. $30 pick up only

 

 

 

Quarter glass with the chrome in good shape. $35 shipped

 

 

 

R180 Differential in great shape. I have not confirmed it yet but I believe it is the 3.2?? that came in the standard 240Z. $30 pick up only

 

 

 

Late '72 early '73 240Z with intermittent wipers fuse box in great shape, no damage what so ever and includes the cover. $30 shipped

 

 

 

Black plastic inner tail light panel in great shape- $40 shipped

 

 

 

1971 240Z original black vinyl in decent useable shape for the tran's tunnel, floor riser, and wheel well's. $45 shipped obo

 

 

 

1971 240Z original black vinyl dog leg interior peices in good shape. $35 shipped

 

 

 

1971 240Z original black plastic interior dome light trim in great shape. $40 shipped

 

 

 

Steering rack- $40 shipped

 

 

 

Passenger door with all part’s except latche’s and panel’s- $30 pick up only

 

 

 

Steering column- $35 shipped

 

 

 

Fuel tank from '71 240Z- $10 pick up only

 

 

 

Red upper interior plastic panel that the dome light sit's into, in great shape- $25 shipped

 

 

 

 

MSA twice pipe’s exhaust with less than 15k mile’s on it that I put on the car so it could be driven. I figure $65 OBO picked up is a fair price

 

 

 

L28ET webbed intake manifold with most of the vacuum pieces as well as the throttle body and TPS sensor and fuel rail with regulator. $60 shipped

 

 

 

L28 N47 head N42 long block that came from my daily ’73 in OK shape but I would suggest a rebuild before dropping it into another car. Includes an assembled head and block, waterpump, oil pump, front cover and timing setup still installed but the chain fell ( was the last straw with this engine thus why it is for sale ) oil pan and valve cover as well as the waterpump pulley and crank dampener. $100

 

 

 

L24 points distributor that I converted to Pertronix less than 5k mile’s ago so it’s like brand new. Worked great on my ’73. $70 shipped

 

 

280ZX electronic distributor with ignitor in what appears to be good shape $35 shipped OBO

 

 

1973 240Z Gauge set. Tachometer, speedometer, oil/water, fuel/amp's, no clock as it is broken like usual. $40 shipped for all gauges

Edited by Apex944

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×