Jump to content
HybridZ

Luna: The cause of, and solution to, all of my problems


Recommended Posts

Keep up the good work, all this stuff is looking awesome. I don't use my dash at all either and to have it matched eight the rest of the dash would be a really clean look. With the cost of other carbon dashboards out there I'm sure if the pricepoint is right it will be a real hit.

 

Thanks, I am really looking forward to the outcome. Although it is highly unlikely that I will be making these for others, as I am fairly certain the tooling (plug and mold) will have to be destroyed in order to make the part. I'm going to try for that not to happen, but it probably is.

 

do you think you can take pictures of all the steps in the molding process?  even the little stupid details, like how you lay the fiber, take the mold off, and how you cut the edges to make them the way they are supposed to be (and not sticking out or super sharp)

 

It's not something regular people get to see, and i'm quite curious....

 

thanks!

 

s

 

PS: the work you're doing is stunning, man.  keep it up!

 

I can certainly start thinking along these lines. Perhaps a gopro video of some of the process. A better understanding of the process will help people realize how much time, effort, and money goes into even the simplest of parts.

 

I thank you for the kind words. As a 25 year old guy, teaching himself, working out of his garage, I am humbled by the wonderful support and feedback this site provides.

 

Thank you all for keeping me on track and in check.

 

 

 

 

 

The insert I made failed quality control. I didn't snap a picture of it, but I've decided to modify the inset plug to make it much easier to lay up. One large storage compartment instead of two. Simplifies things greatly - allowing for higher quality control.

 

Here's the beginning of that. I hope to have this finished in a day or so.

 

Chopped!

 

IMG_20150618_145540818_zpsqdvabi9w.jpg

 

IMG_20150618_193300779_zpskxpcwp3w.jpg

 

 

 

 

 

I did a little bit of sanding tonight. Won't look like much in the pictures, but the bottom is essentially, for all intents and purposes, what I'd call "roughed out"

 

 

The top won't be needing nearly as much work, as it isn't as crucial cosmetically.

 

 

IMG_20150618_212427025_HDR_zps1c9pst72.j

 

IMG_20150618_205640403_zpshtohri5w.jpg

 

IMG_20150618_205621606_zpsqzhanebs.jpg

 

 

 

I expect to be sanding primer by the weekend.

Edited by OldAndyAndTheSea
Link to comment
Share on other sites

Well, the weekend weather turned out to be wonderful, so instead of sanding on a beautiful day, I went sailing instead.

Lost a little time there.... So I'm not sanding primer as anticipated. But, I did make some progress this evening.

Started working on the top portion.

Crack kills, people..


IMG_20150620_135920406_zps3nbpqmsk.jpg

IMG_20150620_143028503_zpsddflxtiq.jpg

IMG_20150620_143015204_zps8pgrmor0.jpg

IMG_20150620_165420667_zpso0ff4shj.jpg

IMG_20150621_202031818_zps5oe4o51t.jpg

IMG_20150621_202050852_zpsn5n5uxgv.jpg

Still needs some fairing, but it's getting there.


And finally the insert plug. I'll be finishing that up tomorrow.

IMG_20150621_210925217_zpsw9hrunls.jpg





I lost a little time, but gained a little sanity. A fair trade. Thanks Moth.

Now back to the task at hand...

Link to comment
Share on other sites

Well, I've been slacking..... The days have been nicer than anticipated and instead of working, like a good boy, I decided to enjoy the outdoors instead.

My two week deadline was destined to fail from the start, as today I realized I actually don't have enough carbon on hand to make the dash, even if I did have the mold ready.

Whoops. :D

 

Oh well, I've got 10 yards on order.

So I'm going to continue fairing the plug for an hour or two each day until it is ready. I'll be sailing, at the winds discretion, any chance I'm not at work or working on the car(s).


It is pretty close to the first spray. A few hours of futzing and I'll have it in one color.

IMG_20150623_200942998_zpsmifp6uma.jpg

IMG_20150623_201012274_zpsjk2zxbcs.jpg

IMG_20150623_200540605_HDR_zpswutbitpb.j




The console insert plug is just about finished. I should be pulling a mold off of it within a couple days.

IMG_20150623_133535703_zpsuxaukvbn.jpg

IMG_20150623_141141776_zpscyqlkafy.jpg

IMG_20150623_141155561_zpshw0n2epl.jpg

V1 part vs. V2 plug

IMG_20150623_141241761_zpsgcdgbbrh.jpg

Will be a much simpler layup.



So not as much as I, arbitrarily, wanted.....But progress nonetheless.

Tomorrow I'm definitely going sailing. I'm soo close to a foiling gybe on the moth I can taste it


....I'm an addict.

Link to comment
Share on other sites

Yup, this version would allow for such a thing, should someone want it.

 

A simple hole saw operation to the OD of the cup holder of your choice. Fits in the recess of the, once, ash tray.

 

That was the main idea for deleting the ash tray....along with other reasons.

Edited by OldAndyAndTheSea
Link to comment
Share on other sites

  • 2 weeks later...

My busy season has begun in full swing. My business partner and I take six weeks off in the summer to enjoy the water (we are both avid sailors)

I'm teaching sailing, and spending as much time on the water as physically possible. Making money so I can finish the car up.


That said, I am still working, albeit slowly, on the car.

First, very rough, coat of primer. Still much fairing left to do. Slowly but surely.

IMG_20150703_120902416_zpshz7bds3r.jpg

IMG_20150703_122440584_zpsku5hcyjp.jpg

IMG_20150703_122612258_zpsjoreac02.jpg

IMG_20150703_122624588_zpsnpwonw2y.jpg

IMG_20150703_122637262_zpssshwdqef.jpg



And some of what I've been up to.

IMG_20150625_165104344_zpstchlqgb0.jpg

IMG_20150625_175409247_HDR_zpsegrgh8rl.j

IMG_20150625_175446573_zps6qqlkfm8.jpg
 

Kids flying the chute!

IMG_20150630_110216880_zpshajvdph4.jpg
 

 

 

Foiling gybe moth videos soon!
 

 


Life is good.


Hope all is well for everyone reading.

Edited by OldAndyAndTheSea
Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Progress is slow.

A fairly heavy storm from the Northeast ended up taking out my dock. That was a fun morning. Glad the Whaler and the hoist made it through unscathed.

Apparently there were reported 6' rollers in the Harbor, which for a Harbor, obviously, is quite uncommon. Nor'easters wreck my property. Luckily, they are fairly rare.  

IMG_20150715_082152152_zpsac1q422l.jpg

I lugged them out of the water and piled them on shore. They were heavy, the water was cold, and it was early (6:30am), but I was pissed.

IMG_20150715_082102575_zpsvc0dxwmb.jpg


This made boat rides slightly more interesting, as you had to wade out in 5' deep water to the hoist. Needless to say, I had very few passengers the last couple weeks. :D
IMG_20150715_082106232_zpsuy07s67c.jpg







But the dash plug is very close. One, maybe two, more block sessions and I should be waxing away. Then I'll make the mold. Woot!

It has come a very long way from the piece of garbage I was working with initially.

IMG_20150726_175438287_zpsiiu0bevk.jpg

2k High build primer

IMG_20150726_175631547_zpseewzrjqi.jpg

IMG_20150726_191459414_zpsxobst414.jpg

IMG_20150726_191540688_zps9uhqz9bs.jpg

IMG_20150726_191550696_zpsovcirrfl.jpg

IMG_20150726_191559825_zps9s0ob1wt.jpg

IMG_20150726_191443027_zps0dxjx3ow.jpg




I also bought a bunch more goodies for the car, and am expecting to order some big things like brakes real soon.

Now if only I could find more time...:P

Link to comment
Share on other sites

  • 2 weeks later...

Some of the remaining parts...

-Finned R200 differential cover.

IMG_20150808_191706128_zpsijc7zwzb.jpg

IMG_20150808_191638500_zpsthkatkno.jpg

IMG_20150808_191649847_zps4m08tdcz.jpg


-Arizona Z Car finned billet brace kit, making an otherwise sway bar clearance issue a non factor.

IMG_20150808_191817718_zpsq8kgti8z.jpg


- T3 billet R200 mustache bar, to hold my future differential.

IMG_20150808_191746571_zps2nrkaxzw.jpg


- And a quick mock up of what it will look like. Can't wait til I can put my beautiful lower control arms on and mount everything in place.

IMG_20150808_192019397_zpskv2ponjo.jpg

IMG_20150808_192130895_zpsj91jj8ql.jpg



Just need the right differential.



Happy Summer everyone!

IMG_20150728_231747_zpsuh3tokjc.jpg

Link to comment
Share on other sites

Yup, that was definitely a swim/motorboat day. No sailing for me. It's always a good time, if you're on the water.

 

 

 

 

 

 

Well after some considerable time fairing, I finally finished the dash plug this evening.

I took some excited, poor quality, shots to celebrate the occasion.

I probably have around 20 hours into this plug. Which will, of course, have to be destroyed. So here's hoping it all works out. Otherwise I would have just gotten some serious sanding practice for no good reason.


Hurrible pictures, as promised, as always.

For those that forgot, here is what I started with initially....

IMG_20150620_143028503_zpsddflxtiq.jpg


IMG_20150614_164208886_zpsqpgaubz8.jpg


And some, considerable, time later.


IMG_20150814_210400192_zpswy4savnu.jpg

IMG_20150814_210409689_zpsclmbswby.jpg

IMG_20150814_210416655_zpsrzlfyh6i.jpg

IMG_20150814_210447269_zps2gfxo3bh.jpg

IMG_20150814_210521592_zpsjsoelyow.jpg

IMG_20150814_210917492_zpspeiyulzt.jpg

IMG_20150814_211023554_zpsllpgai36.jpg

IMG_20150814_211000375_zpsnuve0x9x.jpg



Looks like tomorrow I will be waxing and will begin to make the mold! Yes!


...Also finally updated my GoPro housing/microphone status, so expect some 280zx driving videos in the next couple days.

Edited by OldAndyAndTheSea
Link to comment
Share on other sites

Today is my 26th birthday.

To celebrate, I'll be spending a little time to see if I can't essentially finish up the mold, in between other activities.

Snapped a few more pictures (what else is new) of finished waxed plug.

IMG_20150815_112324292_zpsj6trc4fq.jpg

IMG_20150815_120834396_HDR_zpslgb8a2wn.j

IMG_20150815_125518222_HDR_zpsswegvdhw.j

IMG_20150815_143506197_HDR_zpsdt1bgwhb.j

IMG_20150815_183642813_zpsvvrgqfzg.jpg

IMG_20150815_183720525_zpsf49zudfm.jpg

IMG_20150815_184058686_HDR_zpsfksfvoay.j

IMG_20150815_184441055_zpsj50a9pao.jpg




And the first application of the surface coat. I'll be tossing another coat on this morning, and hope to at least start laying up by the afternoon.

IMG_20150815_193636856_zpsshczuvs6.jpg

IMG_20150815_193710591_zps9q5676lp.jpg

IMG_20150815_193717565_zpsxakhhvoe.jpg

IMG_20150815_193644330_zpsvdstj1b6.jpg



Twenty six baby!

Link to comment
Share on other sites

Thanks my friend!

 

 

My birthday was a good day. Got to relax, worked a little, and spent most of the afternoon on the water.

The little work I did put in went to laying up the dash mold.

Scrap glass pieces hodge podged together with carbon bits in key areas.

Remember, the mold will almost definitely have to be destroyed, or chopped, in order to release the part, so there was no point in going crazy with quality on this. Kind of like the plug.

She isn't much of a looker, at least the B side that is. :laugh:

IMG_20150817_115845574_HDR_zpsox5mhbmk.j


So once cured. I flipped the plug/mold combo over, and began to separate the plug from the mold....

As Johnny Cash would say, "one piece at a time."

IMG_20150817_145838804_HDR_zpse4gu2yve.j

IMG_20150817_174844718_zps0l8uhm2z.jpg



And Voila! Looks like we've got something to work with. Great!

IMG_20150818_131831249_zpslmune3p0.jpg

IMG_20150818_131959695_zpsjbvrrmck.jpg

IMG_20150818_131946521_zpshjw8zeui.jpg


I'm pleased. Onward!

 

Carbon dash, here I come.

Edited by OldAndyAndTheSea
Link to comment
Share on other sites

^^ Thanks Gents!

 

And unfortunately the shape does indeed have bad draft. The front of the three smaller pods, and the tach/speedo pods would not be able to release from a one part mold. The draft angle is negative there. No Bueno.

 

I made the mold juuuuust strong enough to work, so I can easily make a few well placed relief cuts, to hopefully free the finished part.

 



Been busy the last few days. Getting organized, ordering parts, cleaning/refreshing pieces, fabrication, wiring...you know...The usual.

Rear brakes are in the mail, somewhere between here and California. Can't wait for those. In the meantime, I'll continue the pace.

IMG_20150823_152811758_zpsoxuxvpl6.jpg

IMG_20150823_152824139_zpsi79xb97q.jpg

IMG_20150823_171447924_zps9yy6dkeq.jpg

IMG_20150823_171558395_zpsryvbogkd.jpg

IMG_20150823_171637614_zpsf2e0cuis.jpg

IMG_20150825_121725827_zps7sa1ricz.jpg

IMG_20150824_150529163_zpsqwmclqjl.jpg

IMG_20150824_195541315_zpspaoc3d7g.jpg

IMG_20150825_150005323_zpsdifaeix2.jpg


More to come!

Link to comment
Share on other sites

nice work on the connector.  I like that you put heat shrink on it.  the one that came with my car didn't have heat shrink and things moved enough that the connection to the fuel pump got undone when I was adding a wire for a O2 sensor.  not cool.

 

one thing that i'd do if I were to make one would be to label all the individual wires right outside the connector (i'd do it inside, but no room);  while you might remember what does what or look at a pinout, It's safer to have it all written up right there, so you don't have to go print a pinout, or try to remember everything.   optional, but the moment you'll have to troubleshoot, you could be glad.... 

Link to comment
Share on other sites

Thanks

 

Although.... of all of the pinned connections on the db37, I made a grand total of 1 of them. Haha. Mr. Kurk MacKay (FricFrac) was the wiring guru behind my harness. I'm simply the guy trying to not make smoke installing it.. He deserves the credit. The dude certainly knows his way around a set of crimpers, that's for sure :)

 

And I agree. Anywhere I can, I do use labeled wire, so I know what's switched etc in a moment. Kurk is so awesome, on his connections he puts little labels on the ends of all of the connections.

 

 

By the way, Kurk, where did you get that labelmaker? I like reaallly want one. haha.

Edited by OldAndyAndTheSea
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...