Jump to content


Photo
* * * * - 5 votes

PALLNET FUEL RAILS


  • Please log in to reply
316 replies to this topic

#21 pallnet

pallnet
  • LocationLouisiana/Mississippi

Posted 18 May 2011 - 07:01 PM

UPDATE:
Rail stock arrived late today so tomorrow evening after work I will cut it down to blanks for L28's. I need some input as to which rails you guys need me to machine first on this run. Barbed, 11mm O-ring or 14mm O-ring?
Thanks
pallnet

Yeah that's right an L28ET in an S13.
DSC00226signature.jpg
 


#22 zpizzaman20

zpizzaman20
  • LocationNorthern VA

Posted 19 May 2011 - 05:02 PM

I need a barbed one.

Edited by zpizzaman20, 19 May 2011 - 05:02 PM.


#23 BrownBomberZ

BrownBomberZ
  • LocationHomosassa, FL

Posted 19 May 2011 - 05:58 PM

Hey Pallnet

Do you have any more gauges and seal kits

#24 pallnet

pallnet
  • LocationLouisiana/Mississippi

Posted 21 May 2011 - 07:46 PM

Sirs
I will produce a few barbed rails early this week and then some 11mm rails will follow.
Yes I have gauges, some seal kits are here and more seal kits will be here this week.

I love this time of the year here in the south, someone is always cooking something big and good for dinner. My good friend Howard and his wife called my wife and I over to theyre place because Friday while I was working all day, he was out catching blue crabs (he caught over 6 dozen), he iced them down and this evening we ate like kings...
Posted Image

Early tomorrow morning Howard and I will be takeing the kids to meetup with another friend and some of his family. There's a large drainage canal that's full of fat crawfish that has our name on it.
Posted Image
I own 25 crawfish traps and 24 crawfish nets, that's not counting what the other guys have.
Posted Image

BTW: If you need deep water crawfish traps, I make my own so I would gladly make and sell them to you.
After all that I will be back on rails.
Thanks
fellas

Yeah that's right an L28ET in an S13.
DSC00226signature.jpg
 


#25 BrownBomberZ

BrownBomberZ
  • LocationHomosassa, FL

Posted 21 May 2011 - 10:26 PM

What can you say...Got to love fishing and crabbing in the south...now that a few of my friends and I are out this semester of college we may have to catch us some grub like that

#26 turboHLS30

turboHLS30
  • LocationDaytona Beach, Florida

Posted 26 May 2011 - 07:09 AM

Hey, I'd like an 11mm rail with a gauge. How much would that run me?
Kid's in the backseat cause accidents and accidents in the backseat make kids, stick with a 2 seater.
"Those thoughts that were going through your mind as you sat there in your Z breaking through the BOOOST ZONE will become a reality."
By PR280z

Posted Image


#27 turboHLS30

turboHLS30
  • LocationDaytona Beach, Florida

Posted 26 May 2011 - 07:10 AM

DOUBLE POST :(


Edited by turboHLS30, 26 May 2011 - 08:08 AM.

Kid's in the backseat cause accidents and accidents in the backseat make kids, stick with a 2 seater.
"Those thoughts that were going through your mind as you sat there in your Z breaking through the BOOOST ZONE will become a reality."
By PR280z

Posted Image


#28 pallnet

pallnet
  • LocationLouisiana/Mississippi

Posted 26 May 2011 - 10:50 AM

UPDATE:

I have (4)barbed rails with cold start that will be completed by Saturday and ready to ship out after then. I do have black faced gauge in stock and one can be added to the rail order. For those that don't know, this is a stock type of replacement fuel rail for turbo and non turbo "L" EFI engines. It reuses your stock injectors.


Barbed rail with cold start, fittings, custom bent brackets, stainless hardware(no gauge and no hole).
$155.00ea Insured and shipped in the USA.
$175.00ea Insured and shipped outside the USA.

Or

Barbed rail with cold start port, fittings, custom bent brackets, stainless hardware (1)black faced liquid filled gauge.
$175.00ea Insured and shipped outside the USA.
$205.00 Insured and shipped outside the USA.


For this sale of 4 rails I will include a set of 6AN end fittings and injector seals for FREE!!!

Email me to claim your custom fuel rail.
pallnet@hotmail.com

Thanks!

Yeah that's right an L28ET in an S13.
DSC00226signature.jpg
 


#29 turboHLS30

turboHLS30
  • LocationDaytona Beach, Florida

Posted 26 May 2011 - 05:24 PM

I need the one that will let me run Supra injectors on my L-Series. When will you have some of those?
Kid's in the backseat cause accidents and accidents in the backseat make kids, stick with a 2 seater.
"Those thoughts that were going through your mind as you sat there in your Z breaking through the BOOOST ZONE will become a reality."
By PR280z

Posted Image


#30 Kuro

Kuro
  • LocationIllinois

Posted 27 May 2011 - 06:29 AM

I'll take one of the:
Barbed rail with cold start, fittings, custom bent brackets, stainless hardware(no gauge and no hole).
$155.00ea Insured and shipped in the USA.

email sent.


#31 pallnet

pallnet
  • LocationLouisiana/Mississippi

Posted 27 May 2011 - 01:38 PM

UPDATE:

Ok, (2)barbed rails are left from this batch.

I will be running 11mm rails early this week coming, I will post when they are just about ready.

I have (2)14mm rails on the shelf if anyone needs one. Both have a gauge free hole, the gauge itself is extra.

Thanks
pallnet

Yeah that's right an L28ET in an S13.
DSC00226signature.jpg
 


#32 pallnet

pallnet
  • LocationLouisiana/Mississippi

Posted 28 May 2011 - 03:37 PM

UPDATE:

(1)Barbed rail is left from this batch.

Rails will be shipping out early this week.

Thanks
pallnet

Edited by pallnet, 28 May 2011 - 03:38 PM.

Yeah that's right an L28ET in an S13.
DSC00226signature.jpg
 


#33 SuperDan

SuperDan
  • LocationSan Diego, Ca

Posted 29 May 2011 - 09:30 AM

Put me down for 1 of the next 14mm style kits you make.
Experience is a hard teacher, she gives the test first and the lessons afterwards.

#34 pallnet

pallnet
  • LocationLouisiana/Mississippi

Posted 30 May 2011 - 06:21 PM

Sir
I have a 14mm rail with a gauge hole tapped in the side that's just waiting to be boxed in your name. I made it in a batch a few weeks back when I ran the gauge hole as a freebe so I will still honor that. Do you need a gauge? I can add one in the order for the cost of the gauge. Email me for the info.


Some info for the other guys.
Sit tight fellas, I will be turning out some more 11mm rails shortly, I had to bump them back a few days to a week. They're demanding that I spend even more time at work(Toyota) right now.


Thanks
pallnet

Yeah that's right an L28ET in an S13.
DSC00226signature.jpg
 


#35 Tony D

Tony D
  • LocationReno NV & Lucena Quezon, Philippines

Posted 30 May 2011 - 10:59 PM

Don't eat em man! Get a kiddy pool and raise your own. They like corn meal.

But as a Michigander, I'll never admit to how I know this! :lol:

Good to see you are back in business Pete.

What of the "Ford" injectors---they were 10mm as I recall. You said you had a rail setup for them at one time--still have that pattern?
Misanthropic Anthroparion Class 5 Hoarder, aspiring to posthumous fame as my containers are cut open and the market floods with crap I've squirrelled away over the years! I endeavour to persevere...

#36 pallnet

pallnet
  • LocationLouisiana/Mississippi

Posted 02 June 2011 - 07:32 PM

Tony
Dude it's too late, I put a major dent in the crawfish population here in my area. I'm going Saturday morning and what I catch is going in a washtube with a fishtank bubbler. I have plans of going Sunday as well but to a different area and boil them that evening for some of the family. My traps work great.
I would try to raise them but we have snakes, birds, cats and coons that would get in there and kill my crop. I know, it's all food....;)

I'm glad to be back in the game.

I made a few rails to use that 460cc injector but I never realy tooled everything completely to make more then a few.

Later
pallnet

Yeah that's right an L28ET in an S13.
DSC00226signature.jpg
 


#37 pallnet

pallnet
  • LocationLouisiana/Mississippi

Posted 05 June 2011 - 06:15 PM

Update:

I have (1)barbed rail and (2)14mm rails still for sale.

I'm machineing (3)11mm rails early this week.

Email or PM me if you're in the market for a new custom fuel rail.


BTW: if anyone is keeping up with my war with the local crawfish population. Today we hauled in a good bit.
Posted Image

I had my little helper with me. I was useing traps and nets but she liked useing a stick/string and bait. I gave her (6)nets to run and she did great.
Posted Image

I can't wait to teach her how to make parts.
Thanks pallnet

Yeah that's right an L28ET in an S13.
DSC00226signature.jpg
 


#38 lilbastard

lilbastard
  • LocationVirginia

Posted 05 June 2011 - 06:42 PM

I need an 11mm. o ring rail kit, and noticed the 125 dollar plus shipping price and was checking availability.
I paypal.
awilson59@cox.net
lilbastard

zzzmaximus on EBAY

#39 pallnet

pallnet
  • LocationLouisiana/Mississippi

Posted 08 June 2011 - 06:10 PM

Sir
Yes the $125.00 shipped for an 11mm rail is correct but I'm no longer offering the free gauge hole by itself although the threaded hole is free with the purchase of a gauge. However I am offering up free 6AN end fittings with each of the 11mm rails from this batch.

Email me so I can tell you what to put in your paypal transfer.

Thanks
pallnet@hotmail.com

Yeah that's right an L28ET in an S13.
DSC00226signature.jpg
 


#40 HK240ZT

HK240ZT
  • LocationSanta Barbara, CA

Posted 16 June 2011 - 03:18 PM

I need one barbed rail with gauge and seal kit if you still have any available.

Thanks,
Howard K.
Work In Progress...




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users