Jump to content
HybridZ

My Dream LS7GTZ.......project underway


Recommended Posts

A big THANK YOU to Matt for instructing at Z Nationals at AMP. You kept me and your other students safe and spent a hard, hot day at the track that you could have invested in your own car or your own family obligations. I'm very glad that you fell in love with the Z-car as a little kid. To get into a cobbled together home-built POS like mine with a soup-sandwich, Walmart parking lot driver like me takes some really big balls. Thank you, again, for the great instruction-I can't say enough about what a wonderful time I had.

Link to comment
Share on other sites

  • 2 weeks later...

A big THANK YOU to Matt for instructing at Z Nationals at AMP. You kept me and your other students safe and spent a hard, hot day at the track that you could have invested in your own car or your own family obligations. I'm very glad that you fell in love with the Z-car as a little kid. To get into a cobbled together home-built POS like mine with a soup-sandwich, Walmart parking lot driver like me takes some really big balls. Thank you, again, for the great instruction-I can't say enough about what a wonderful time I had.

Keith,

 

I enjoyed the day and I'm here to tell you that you were probably one of the top 5 fastest amateur drivers on track. You dont learn that in a WalMart parking lot.

 

Your car finally has brakes.........WOW what a difference that makes. You allowed me to Coach you, not so much instruct you and that is what I enjoy. You have the car control skills, it just takes someone who can encourage and push you closer to the edge without going over. You did great and I look forward to many more sessions. 

 

The smoother you are with the least amount of input........The faster you can go. 

 

Your lap times were faster than my advanced student that wanted to show me how fast his car was (I think he was showing me how to floor it between turns) and how he was surprised when they didn't give him "solo" status to begin with. It was his first time at AMP (probably the most technical track in the SE) and I just happend to be his instructor (I hold the track record in a sports car 1:23.2, so what would I know). He would rather let his ego drive than be teachable and possibly learn something. I didnt bother telling him about how I have a driving coach that goes to every race with me. Like I said, What would I know. 

 

You come to the track preparred to absorb any and all information that can lead to you becoming a better overall driver on a road course. Whether it is information from me or whomever............That is the why you continue to lower your lap times and in the process somehow push the envelope more while driving with more confidense and control. 

 

It was my pleasure.

  • Like 1
Link to comment
Share on other sites

  • 3 months later...

Some spy shots of the new MTI Racing GTZ racecar........(she's been out of comission for 16 months now)

 

new carbon fiber wide body

new MTI built LS7 427 race engine w/ more hp (650rwhp)

new 102 throttle body and 102 LSX fast intake

new V5 race cam

new ARE drysump and Razor pump

new tube frame front clip

new upper and lower control arm Howe suspension

new MTI Machine custom CNC hats and AP Racing brake caliper brackets

new adjustable Bilstein coil overs

new Howe spindles and hubs

new side pipes and custom headers

new PPG dogring T56 transmission

We widened the cars track width 4"

We lengthened the cars wheelbase by 4"

New 2" wider CF rear flares

we dropped the fuel cell by 10"

relocated the ARE dry sump tank to passenger floorboard at firewall

relocated the battery to passenger floorboard

relocated cool suit cooler to passenger floorboard

new radiator

new GT style air box from grill to hood

new heat exchanger

new CF cowl hood

new CF rear spoiler (same wing)

we changed the degree of rake in the nose for better downforce aero

new splitter/undertray

redesigned the opening in the gnose to decrease the drag 

new window net (the old one had expired)

installed seat bracket to recertify the FIA RACETECH seat 

 

GET READY................

 

 

 

post-13190-0-11687800-1421894862_thumb.jpg

post-13190-0-00691300-1421894882_thumb.jpg

post-13190-0-55899300-1421894927_thumb.jpg

Link to comment
Share on other sites

How much weight did you drop?

Cary,

 

I'll have it on the scales tomorrow hopefully if not within a few weeks. I'm dying to know what our weight is now as well. 

 

I've attached a few more build photos. 

1. Notice the new front clip geometry. We tied it into the old chromolly frame rails we had added in the past for chassis strength.

2. Take note of how far back against the fire wall and how much lower we were able to mount the engine. cg should be greatly improved.

3. I designed the new front clip to have a quick release plate to make it where if I hit something, like a wall, It should give at this point and break free hopefully not damaging/bending the majority of the front clip cradle. This is right behind the gnose. (not that I ever hit walls BTW) The last time I wrecked it at Road Atlanta in T4 I hit the wall going 83mph per the data. The tie rod bolt sheared off and I had no steering input. That was the second time that had happened, first time was at CMP and I didnt hit anything. The new Howe stock car suspension solves that.

4. As you can see I am standing on the removable chromolly nose cage, I'm 180lbs., and it is quite strong. This is the brace for the splitter and as we all know the true rule of thumb is that if it going to make 180lbs of downforce or more, it should support at least that weight.

5. Ive included a shot of the profile where you clearly see where the new CF body panels, that are based on oem wheelbase, are repositioned for clearance. The car will be going to the Classic Livery of Atlanta (a good sponsor to have) to rework the flares and provide a better fit and finish. I have a very detailed plan in my head of how I want it to perform but depend on input from some key people. Function over form is the key.........

6. With the removal of all the front chassis. The front clip deffinitely weighs less and the CF body panels weigh less as well. So Im thinking we probably lost close to 150 lbs.

7. The lowering of the engine, the fuel cell, the ARE tank, the battery and the cool suit will really lower the cg.

8. A good friend who drives for Alex Job Racing in the WeatherTech Porsche was looking at it and said that they lengthen the wheelbase on their cars by 1/2" and it makes a huge difference. Leh said that out of everything we have done that the extra wheelbase is the single most important improvement on the whole car. To go from 90.7" to 94.5" is major. It almost makes the fact that the body panels dont fit anymore taste a little better.

9. The CF panels are so light its hard to describe. Ive included a picture of me holding the cowl hood up with my pinky. 

 

Thanks again for following my HybridZ build............

post-13190-0-58776300-1421971956_thumb.jpg

post-13190-0-70776900-1421971959_thumb.jpg

post-13190-0-62657200-1421971961_thumb.jpg

post-13190-0-93218000-1421971965_thumb.jpg

post-13190-0-48898600-1421971969_thumb.jpg

post-13190-0-70323700-1421972567_thumb.jpg

post-13190-0-42151400-1421974190_thumb.jpg

post-13190-0-62393200-1421974200_thumb.jpg

post-13190-0-12594700-1421974209_thumb.jpg

Link to comment
Share on other sites

I'm nearly speechless, it looks amazing.

 

How did you make the wheelbase 4" longer?  I cannot tell by looking at the body.

 

When designing the new front clip we did it then. I actually didnt think about how the panels I was having made were going to be whacked at that point. We made it work and in honesty this car has never been about beauty, even thought I always think of her as one the best looking Z's. It's always been about the function of the car. The answer to your question is that the added length is in the front clip. 

 

Thank you for your post.........

Link to comment
Share on other sites

Really good looking project! I'm interested about that rear wing. Whats that brand? Where did you buy it ? Thanks!

I am the VP of Operations for MTI Racing and we do our own machine work, engine building, composites work, etc.... I mainly work with Corvettes and GM platform stuff and one of my biggest competitors is LG Motorsports. I have nothing against them as they run a tight ship and we have mutual respect for one another. I (MTI RACING) offer an incredible carbon fiber 3 demensional wing ($4,000) but it is too large for my Datsun. It is made for my World Challenge Corvette. If it would fit thats what I would have. There is no better wing on the market.

 

The one I use and have mounted on my car is an LG Motorsports GT2 wing. It Carbon Fiber, not 3 demential, and costs a fraction ($2,600) of the MTI wing.

 

I have used 1" angle aluminum and intstalled a wicker

 

I made the end plates myself out of a scrap sheet of Carbon Fiber and wrapped the edges of them with the aluminum wicker as well. I did them larger at first thinking that Indy cars have large end plates. After testing data shows the smaller ones work best and have less drag.

 

The uprights are made by us (MTI RACING) in house and I have attached some photos of how we welded them to the frame rails and routed them through the deck lid. The wing uprights remain pinned to the deck lid at all times and when it shuts the holes in the mounting bracket that we made out of chromoly and are welded to the frame rails for ultimate support (the rear fiberglass deck lid would never support a wing at speed) the holes line up in each and you insert a race push to open style pin. The uprights we make have different holes to enable you to chose the rake setting of the rear wing based on the setup conditions of the car. 

 

I found that when I added the wing it increased downforce over my previous IMSA 3piece tail by 300%. It also made the car have high speed understeer which was easily cured by adding the front canards. 

 

I am very happy with the functional results of the addition of the wing, side skirts, and front canards.

 

Remember that when wings, splitters, dive planes side skirts, etc are added to a car it will definitely add drag. There is a line you have to walk on where do you trim your car out to give you maximum topspeed and be able to add cornering speeds due to added aero. I also remind people that the cars spring rates will normally need to be changed according to what amout of downforce is added. 

 

I am in the process of redesigning the side skirts since I have side pipes now.

 

I hope this proves helpful

 

Thank you again for following my build........

post-13190-0-58555200-1421989578_thumb.jpg

post-13190-0-96290400-1421989664_thumb.jpg

post-13190-0-45844600-1421990087_thumb.jpg

post-13190-0-07605400-1421990092_thumb.jpg

post-13190-0-72486200-1421990096_thumb.jpg

Link to comment
Share on other sites

Having had a 2:01 lap ride around VIR in the old version, I can't wait to see the new version... 

 

I look forward to future updates, Matt.  Good to see you back on the Zcar build!

 

Mike

 Old track, you (185lb ballast) on board, 2:01 was fairly quick for a 45 year old Datsun. I'm guessing that when we get it ironed out this year and visit VIR's new pavement, no passenger, new car. I'm guessing 1:57 or better if the conditions are right. (My personal goal is to break 1:56) As you well know thats  quick for any car. This past year in my race on the new pavement I was doing 2:00 flat race pace in the ST2 Vette and the SU Daytona Prototypes were at 1:53 race pace.

 

As usual when I'm up your way we will get together

Link to comment
Share on other sites

  • 2 months later...

Updates on races?

None yet....... Just still shaking things down and doing fitment and set up. Slow process and with everything else going on I dont get to spend a lot of time on it right now. 

 

Doing some radical things with the body panels...........

post-13190-0-30191000-1429560812_thumb.jpg

Edited by cobramatt
Link to comment
Share on other sites

  • 4 months later...

Just an update shot of what Im doing with the car.

 

Since I widened the body 4" (2" on either side), The IMSA flares are not working. I fabricated another flare that I thought was going to work until I built the new side skirts that house the side pipes. They also add aero and extend under the car where only the tunnel is exposed. This really cleans up the underside incredibly, its great to not have to have exhaust in the way. The new side skirts ended up being a little wider than my new flare extensions so Ive gone back and mocked up with aluminum what I am going to need to make out of fiberglass. These box flares are going to be pretty cool looking but most of all functional. I am pulling aero knowledge from Super GT and DTM to direct the flow of air around the car and create downforce. Take note of the foil at the leading edge of the side skirt, it will increase the downforce there as well. 

 

Ive got a few other tricks up my sleeve and as everyone can relate..................Its the neverending build.

post-13190-0-23236900-1440625847_thumb.jpg

Link to comment
Share on other sites

  • 3 weeks later...

Looking good...I know John will knock it out for you!!

Mike,

 

If its body work and aero thats really my department, If its engine or drivetrain thats Johns department. He and I make a great team but please dont think that I just point my finger and John takes care of everything. We both have been busy on other things and havent been able to work on my stuff lately. I was able to continue the DTM style box flares on the Z this past weekend. I think when this is done it is going to be an incredible aero package.

post-13190-0-01944200-1442239991_thumb.jpg

Link to comment
Share on other sites

  • 1 month later...

A big THANK YOU to Matt for instructing at Z Nationals at AMP. You kept me and your other students safe and spent a hard, hot day at the track that you could have invested in your own car or your own family obligations. I'm very glad that you fell in love with the Z-car as a little kid. To get into a cobbled together home-built POS like mine with a soup-sandwich, Walmart parking lot driver like me takes some really big balls. Thank you, again, for the great instruction-I can't say enough about what a wonderful time I had.

 

 

Keith,

 

I enjoyed the day and I'm here to tell you that you were probably one of the top 5 fastest amateur drivers on track. You dont learn that in a WalMart parking lot.

 

Your car finally has brakes.........WOW what a difference that makes. You allowed me to Coach you, not so much instruct you and that is what I enjoy. You have the car control skills, it just takes someone who can encourage and push you closer to the edge without going over. You did great and I look forward to many more sessions. 

 

The smoother you are with the least amount of input........The faster you can go. 

 

Your lap times were faster than my advanced student that wanted to show me how fast his car was (I think he was showing me how to floor it between turns) and how he was surprised when they didn't give him "solo" status to begin with. It was his first time at AMP (probably the most technical track in the SE) and I just happend to be his instructor (I hold the track record in a sports car 1:23.2, so what would I know). He would rather let his ego drive than be teachable and possibly learn something. I didnt bother telling him about how I have a driving coach that goes to every race with me. Like I said, What would I know. 

 

You come to the track preparred to absorb any and all information that can lead to you becoming a better overall driver on a road course. Whether it is information from me or whomever............That is the why you continue to lower your lap times and in the process somehow push the envelope more while driving with more confidense and control. 

 

It was my pleasure.

 

Just finally reading up on this post in its entirety. Jon Mortensen directed me here to checkout your newest setup.. he was right!

I'm doing a double wishbone style setup with tube frame style front end, but I wanted to keep factory fenders. Lots of inspiration here.

 

I quoted you both, because I realized that I met both of you guys at nationals at the track day.. I thought I recognized RebekahsZ's car and after looking at cobramatt's photos, we talked briefly at the track. Cool to come across lol

 

anywho, Cobramatt, AWESOME car. I'm going to pile all this into my brain for the next few weeks of fabrication into my double wishbone car!

Link to comment
Share on other sites

  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...