Jump to content
HybridZ

73BOTIZ

Members
  • Posts

    68
  • Joined

  • Last visited

About 73BOTIZ

  • Birthday 03/29/1952

Contact Methods

  • Website URL
    http://www.datsunracing.com/z/73botiz

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

73BOTIZ's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. I sell the crossmembers for $150.00 plus shipping, usually $15.00 to $20.00

    Mike D.

  2. how much do you charge for mounts to do a 302 swap?

  3. I have a crossmember that I have sold to many of the HybridZ members. It was sold as an "alsil" mount. You can do a search for threads and I can send you a pic if your interested. Mike D.
  4. I have what you are looking for.I can send you som pics if you still need these items. I am in the Nor Cal. Mike
  5. Here are some dimensions for you. Overall from inner flange to outside of threads = 6" Inner flange to the beginning of the splines = 3-3/4" Inner flange to the end of the splines = 5-1/8" I used the axles with turbo companion flanges and cv axles, before I switched to 280Z axles,and I don't have any stock R180 companion flanges to measure for you. Hope this helps, Mike D
  6. I removed the one on my Q45 R230 without removing the rear cover. I just removed the pinion nut and used a 3 finger bearing puller. Mike D.
  7. You can file a fraud complaint on e-bay. I had to do this once and was able to get most of my money back. All the info you need is on their website. Good luck, Mike D.
  8. Tim, I also want a pair of shafts. Let me know what you need as far as payment or deposit. Thanks, Mike D.
  9. I have a complete rear end assy. drum to drum from a 78. Make me an offer for the moustache bar. Mike D.
  10. Good job Mike, see you at the track. Mike D.
  11. Thanks for the info Tim, I didn't think about that. I do appreciate all of your info on this swap, it is very helpful. Mike, I hope to get to the track in March. I am installing frame connectors at the moment. I also want to get some Drag radials because it is frustrating going up in smoke in the first 3 gears. The next you have your car up in the air, do you think it would possible for me to swing by and take a look at your front mount? Mike D
  12. I just finished my adapters so I thought I would post some pics of the finished parts. I usually don't have much luck posting pics, so if they do not come up, they can be viewed here http://www.datsunracing.com/z/73botiz As soon as I get another pair of cv's, I will start the installation and fab a front mount. Mike D.
  13. I have bought products from a local company in Rancho Cordova Ca. Specialty Design Products. They have anything you need in either stainless or mild steel. I'm not sure if they have a website but their address is: SPD 11252 Sunco Drive Rancho Cordova, CA. 95742 916-635-8108 e-mail specpro@msn.com They have a free catalog that lists all of their items. Mike D
  14. I installed mine and it was not hard at all. I did have the rear end on the bench at my shop which made it much easier. I did have to surface grind a small amount off of the Phantom Grip so it would fit between the spider gears. I also dis-assembled the unit and counterbored the spring pockets and installed stronger springs. Mike D.
  15. Thanks, for this info Tim. I will be getting a pair shortly. Mike D
×
×
  • Create New...