Jump to content
HybridZ

stav2201

Members
  • Posts

    92
  • Joined

  • Last visited

Profile Information

  • Gender
    Not Telling
  • Location
    Danville Ca.

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

stav2201's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. I agree with Tony D on this, I would not grind out those fi notches. if I recall correctly, on an L28 you can use dcoe40s, but optimal power is with 45's or 48's. so a bit pointless to grind them down. Before you do any work on your head, make sure you have upgraded to some after market headers. no point increasing airflow coming in if you can't get it out properly.
  2. I'm in the market for a new set of rims. the klutch sl1's are what I am looking at, but before I buy them I was curious if anyone has had any fitment issues with them regarding a specific build. here is what I am running: -ground control cool overs -wilwood complete brake conversion here is what I want to install: -16x9 klutch sl1 with 15+ offset I have a set of enkei 92's at the moment and the clearance is very small between my calipers and rim, maybe a few mm. have any of you had clearance issues with the face of the rim and wilwood calipers using their 15+ offset rims?
  3. I'm looking to get a set of 16x8 of these wheels. do they still sell them in 0 offset?
  4. this is a rough mockup of what I want to install. the top photo is a picture of my engine bay, the bottom is how I want it installed. this is where I am a bit confused, the stock lines in my car are perfectly suitable for an install, the brass fittings on the willwood prop valve are just not 10m so I cannot use the lines.
  5. this proportioning valve is still causing issues since I don't want to make custom lines, (dont have the tools). I've decided to take a different approach. instead I plan on buying two 10m male to m10 female invertes flare adapters so I can use my stock brake lines and install it in the engine bay on the firewall. anyone have any experience with this approach and know if it is a viable solution https://m.summitracing.com/parts/aaf-all50120?seid=srese1&cm_mmc=pla-google-_-shopping-_-srese1-_-allstar-performance&gclid=CKmMvKee6dQCFQ-OfgodRIsC4A these are the adapters I will be buying to screw into my willwood proportioning valve
  6. you need. -r200 mustache bar, reverse it -r180 driveshaft -r180 companion flange (r200 will not fit) -after market stub axles -r180 diff cover -reverse your diff mount no other modifications are needed
  7. I'm looking for an Arizona z car sump oil pan and a fidanza flywheel, shoot me a message if you got one!
  8. any updates on how it is holding up?
  9. After all the research i have done about sound deadening and user reviews on all the "Off brand" types, dynamat is the most expensive for a reason. The biggest issue with all the other brands seems to be.... 1) The smell 2) Comes off on hot days 3) The smell again... Even worse on very hot days 4) Lack of quality Most reviews seem to say to some effect, "Should of just spent the extra money on dynamat to begin with and save myself time and the hassle". I have dynamat in my car, made a very noticeable difference as soon as a drove it. Remember, you do not have to cover every square inch of your car in it, it just reduces the resonance the metal makes by reducing vibrations. One box was more than enough to cover my floor pans, some of my door, and trunk space (With a couple extra sheets left over) http://www.ebay.com/itm/Dynamat-10455-Xtreme-Bulk-Pack-36-SQ-FT-9-Sheets-/301558330220?hash=item463646f36c:g:zOEAAOSw5cNYPc~N&vxp=mtr
  10. Anyone ever seen some seats like this before, or know if they are still made?
  11. I am finishing up with my willwood install from arizona z car and i have hit a bit of a wall with installing the proportioning valve. I want to make lines in order to have it run into my cabin (right next to my right leg). Although arizona z car supplies a good "how to" install, i feel it is lacking a bit of information. I need to know if i have to remove the distribution block from my 1975 280z, connect the front lines together, then install the willwood proportioning valve between the lines of the back brakes? Silvermine auto suggests removing the distribution block (which is bolted to the firewall) while arizona z car said to place the proportioning valve after the distribution block. Any help would be much appreciated!
  12. I'm setting up my 1975, 280z for a mild track build and canyon carver. at this point I have replaced all of my bushings, balljoints, front/rear wheel bearings, 1inch bump steer spacers, ground control coilovers (no camber plates), spring rates as follows, 200 front with kyb struts, 225 rear with hp struts, rear 7/8 sway bar, rear strut bar, zx transmission, 3.9 clutch lsd, and 16x7 enkei 92s. I'm looking for a front sway bar and was looking at the msa 1inch bar. any suggestions on a proper sized sway bar I should be using or how tight I should bolt down the end link bushings? the car will not be lowered anything more that 1 3/4 inch.
  13. if anyone is thinking of purchasing any parts from this craigslist ad in the bay area keep in mind that this man has zero integrity when it comes to price. I went to go buy the sway bars from him for 125 which we agreed upon. (he has no hardware or bushings for them). when I went this morning he tried to gouge me for 180$ when I got there. just make sure you get the price down way before you head out to deal with him. https://sfbay.craigslist.org/eby/pts/6022802235.html
  14. I have one, it's for a 240z, no vents front valance.
×
×
  • Create New...