Jump to content
HybridZ

Syndicate

Members
  • Posts

    40
  • Joined

  • Last visited

About Syndicate

  • Birthday 04/23/1980

Syndicate's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. Hey man, me and you are on supraforums.com together. You ready to help me with my 2jz swap now?
  2. Gave you a ring. If for some reason you check this before your answering machine. Give me a ring back at 910-228-1458 Blake
  3. Not to take anything away from Hybrids but that is what would happen to this project most likely if I don't sell it now. I would most likely pull the engine and trans out and sell them. And just have the rolling chassis but up on blocks at my farm and keep the wheels for my next car. I will be the first one to say, if I could turn wrenches I would love to keep this car. But I can't and what troubles me also, is that even after the car is finished, their will be maintance issues that I will not be able to address. So with that being said. She is forsale for 5,500. below is a list of specs and other items that come with the car for that price. Pictures are obviously located above in the the post, but if you or someone would like to see more pictures, I have more. Thank you Blake 1990 300ZX TT with 406 SBC engine and built 700R4 auto transmission swap. Quick review of engine and transmission...406 SBC engine, Cast iron Vortec Fast Burn cast iron heads never touched. 1.6 roller rockers, hardened push rods, hydraulic lifters, Forged Eagle 4340 crankshaft, Forged Eagle H-beam 5.7 rods, 13.1 comp hyperpunetic SpeedPro pistons, balancer, Scat flywheel. 700R4 auto trans with shift kit, 3,000 rpm stall converter. This engine and trans combo was built to handle over 600hp.New Moda R8 wheels 18x8 front and 18x9 rear. BFG Force tires up front and BFG drag radials rear both front and rear BRAND NEW Never drove on. I have now found myself a new toy and do not have the interest to finish this one. THIS CAR IS NOT COMPLETED. The engine and transmission are mounted in the car. All that needs to be done now to finish the car is the following. Intake, carb, distributor, full exhaust, driveshaft, starter, radiator, water pump, hoses and wiring. If you message me with your email I will be more than happy to send you what pictures I have the progress so far on the car. Other items I have are....... Brand New Chevy 302 .30 over forged Speed pro pistons Brand New starter for SBC Distributor and cap for SBC Fuel injection manifold for LT-1 with TB and injectors Brand New electric water pump 4 Brand new in boxes Power Stop bronze slotted rotors for the TT 90-96 300zx Holley blue series fuel pump and regulator in box Complete Interior to a 90-96 300zx Red in color 2 90-96 300zx front fenders 2 90-96 300zx rear tail lights with center section 2 90-96 300zx headlights and turn signals
  4. I sold the TT engine and trans along time ago. How serious are you about buying this thing? I ran into an old friend who works at a rather large performance shop in town that is willing and wants to finish the car. They feel some magazine coverage can come from it since they have had a couple other cars in mags before.
  5. I will get a price together with all of the items that would come with the car. Just give me a day or so. I'll shoot you a pm when I get all of it together. Take care Blake
  6. If you are serious about buying it, I will cut you a pretty good deal on the whole package. Plus I have a TON of things that would come with the sale. I will probably end up buying another Supra and just sticking to bolt on from now on lol. I would love to finish this car, just don't have the time. Blake
  7. Just need someone to finish it off. All it needs is minor things like, intake manifold, driveshaft, radiator and hoses, wiring, things like that. And no trans tunnel massaging needed here.
  8. Here's my project. Bought the car from a performance shop awhile back. My progress is below, but now I am at a stand still. I don't have alot of time to work on and finish the car. But every shop I talk to here locally wants an arm and aleg to finish it because they have never seen one before. The car is so close to finishing it makes me sick. If anyone is local to Wilmington NC, please help a brotha out lol!!! Bought it............ Put rims on it......... Towed it to the shop......... Ripped the Twin Turbo motor and trans out........... Started fabbing............. Test fitted an engine............ Engine and trans mounts ready......... Built a SBC 406 for it.......... Bolted the 406 and 700R4 in it............ Rolled it outside............ Now it sleeps beside a V8 rx-7 waiting to be finished..... HEEELLLLPPPPP!!!!!!!
  9. My bad on the 2nd gen thing. I thought the 84-86 were considered 1rst gens. But anyways I plan on buying a 350 here soon just to grab up the drop in conversion for the Ls-1 from Hinson. I have seen pictures of the swap and the room under the hood is crazy. There is plenty in there for a possible twin turbo kit, big single or even a top mounted magnacharger or better yet a kennbell. The 350/Ls-1 marraige would be something not to recon with. She'll go straight, through curves or even sideways perfect and still stop on a dime.
  10. Well then if it's for the 2nd gen Z, how is that a conversion kit for the Z32?????? Back to the point, no one makes an over the counter kit for the Z32 yet. But someone I know just might lol
  11. Well, they didn't lie to him and tell him it was going to be easy to make that. They said the average was 900-1000 a week for a 5-6 day work week. So atleast they are being honest about it. I just thought that was pretty good pay compared to the area money he would be getting at an hourly job. Plus he already owns two trucks and all the tools he needs to do it since he has already worked for Time Warner as a sub doing cable,hsd, and digital phone work. So his out of pocket up front money wouldn't be that big of a hit. I just never knew there was that much money in the Direct TV install market. I know when he was working for Time Warner he was knocking down 900-1100 a week no problem. He just wants to get out of Time Warners hair because of all the crazy ass climbing he has to do for installing cable drops off telephone poles. 32 feet in the air off working off of a fiberglass ladder can get scary sometimes I'm sure.
  12. My little brother is thinking about installing Direct Tv for a living. He has told me that some of the installers he has talked to have told him that they are pulling in $1200 plus a week for installs. I just wanted to know if any of were doing this or knew someone doing this for a living and could verify this? I just think that's kind of a ong shot for that type of work, but I could be wrong. Thanks in advance Blake
  13. You let me know what you want and when you want it and we will agree on the price for that work.....done.
  14. Well if someone wanted to run an auto, those engines are not that bad of a deal. Would handle boost VERY well too. I forget, which liter sizes are the truck motors?
×
×
  • Create New...