WTB: drivers side fender
Z:1976 280z
Name: Mel Steves
Location: St. Petersburg FL
Number: 239-404-5501
Email: Melspace02@aol.com
Payments: Paypal or cash in hand
Let me know what you have. Thank you
I have recently installed a new aluminum 3 row rad and also a new water temp sensor and noticed that the car is running hotter. I noticed that the old water temp sensor was nasty with build up but Im also wondering if there is a proper way to bleed the coolant system on this car. Its running almost about 3 quarters on the temp gauge which I would believe would be hotter than 200 degrees with the a/c off. When I installed the radiator I used a 50/50 mix and also added a small amount of water wetter. I let the car idle until it was warm with the heat valve pushed to the hottest setting with the fan off and also had the rad cap off to check for bubbles. Any direction would be greatly appreciated. Thanks
I recently purchased a new thermo time switch from MSA thinking it was the reason it would take my z 1 to 3 cranks to start sometimes. Since I have installed the new thermo switch it has improved a little but some times I will have to crank it twice or it will crank the first time but takes 3-4 seconds to fire. I have noticed it to start sooner in the morning and harder while after driving or when its hot out.I also have noticed since installing the switch if it takes 3 times to start it doesnt sound flooded or fart when it finally fires up. Any direction would be greatly appreciated.
Zammm I just got a parts car in and I have all those pieces you need, I'm bad at making prices so what are they all worth to you for a group price? I can send pics if you want. It would be easiest to text pictures. My number is 425 314 8646. Thanks Adam
Looking for some random parts for my 76 280z.. Let me know what you have and how much shipped zip code 33710
Drivers window door trim
Lock knob
Rear hatch datsun logo in excellent shape
Door sill carpet hold down.. Im missing it and it looks bad without it
Hood stick holder.. Mine is broke
Rear trim that cover rear lights. Mine is cracked
Door window crank
Chrome door handle trim
Also looking for an air dam.. Thanks
My speedo gauge light is out and the po put a dash cap on the car. Is there a way to change the bulb without removing the whole dash now? I can move the gauge once I remove the screw but due to the dash cap it will not pull out. Thanks in advanced
I am thinking about getting a ebay champion radiator cause there affordable and look decent. Do I need a 3 row or will a 2 row cool fine. I have a l28et on a stand right now and plan on doing a efan conversion once I get the turbo motor in. I also live in FL and do not plan on having AC in the car when I do the swap. Just seeing if I need the 3 row or not from your experiance