Darkone

i guess i should of added that its going to be a z32 platform build

will the JTR mounts from the 280Z kit fit the 300zx just wondering??

me and a buddy were racing and i exited off the freeway at 3am and made a green light on to a street with like a 2 mile straight away so i opened her up, i passed a cop on a side street that was running radar well he turned on the red and blue's and i floored it lol i made it about 5 miles down the road when a cop coming from the opposite direction flashed his lights so i stopped. I got charged with failure to yield, Reckless driving, eluding an officer, speeding, being a nuisance in a residential area (because of noise) and no registration or insurance the car. they towed it and i have to pay court fines and towing charges to get it back

This is mine unfortunately it is currently housed at police impound till i fork over 2k to get it back zzzzzzz

im looking at this cam comp cams 12-210-2 would this be good in my z its got a 350 TPI and a nv3500 out of a late 80s truck and the stock manual trans rear end and 195/75/14 tire this is the cam specs that im looking at RPM 1500-5500 Duration 268/268 and lift is 454/454 this is seat to seat duration @0.050 is 218/218 and lobe center angle is 110 any info would be great thanks

Ya i just ordered a 10''x20' piece of 3/8 steel to make some brackets so i will have to see how it go's

i zeroed them out and had them hit 25 feet and 40 feet low/high beam respectfully and since they are mounted in a factory style bucket/housing i can adjust them with the factory adjustor screws

Well i found out what intake in going to use it's off of a 06 impala 5.3l and as for the brackets i will have to fab my own cause im only going to run an alternator and no other acc's

I work at a slvage yard and the lights came out of a 05 reno and a nissan murano (i belive) as for the outer covers im going to use the headlight bucket covers and im going to fiberglass around the front and back of the lenses the low beam will be 55 watts and the high beam will be 135 watts

Hey thought this was the right place for this and thought i would get your in put i have an hour into the first one so what do ya think

well the motor came from huricane katrina and was thought to have water damage well the guy pulled the heads off and dropped one of them:frown: well come to find out the engine had no rust or even a sign of water in it. and well long story short hes moving and nedds to sell it so im getting it. and well i figured now that i have logged over 40,000 miles on the z with it,s tune port :twisted:i figured this would be the best use of the ls series motor

Will a 5.3L truck intake fit under the stock z hood? and do you think $200 for an engine with 9 miles onit is worth it its all in a box comes with an ecm and a wiring harness and new headers and needs a head but its complete other than that.

maybe to make sure u get a kit for your car and not a different car

ya he said try it again and id go to jail butt all in all he was a good sport about it

took the z out and boy did i not know what i was missing i idled it down the road and turned on the main road and then l couldnt contain myself so i power braked it through 1st,2nd,3rd:burnout: then let it lose from the binders and what a rush:biggrin:. the police officer down the block thought it was pretty spectacular also:nono: but he let me go with a warning. when it stops snowing i will post some video thanks guys and galls for all the help this wouldnt b possible with out u guys thanks a lot:lol: