First let me say I've read every thread I could find on here about head/block combo's... But I've found conflicting info, so looking for a bit of advice.
I bought a 260z ITS car a few months ago. E88 head, but I don't know much about it. Car will be a track car only - no W2W racing so no class-specific rules, just HPDE, maybe TT after I get used to it. I've not driven this car at all, but the engine seems to run well, with good oil pressure, no funky noises, etc... Plugs are pretty nasty, but I've read the flat top carbs were set to run rich on these ITS cars.... Static compression cold, with plugs in, didn't open the throttle blades of around 185 across all 6. Engine has been pulled, the cam is stamped with a *C* on the tail end. Engine needs to be cleaned up a bit, as the oil pan, oil pump, valve cover, etc all have oil leaks. Car has not been raced in 7 years, but seller said it had a recent overhaul not long before then. The pistons are +.040 if I remember correctly.
I plan to upgrade the brakes and the front LCA/TC rods. It's got illumina coilovers front and rear. 4 speed, 3:70 LSD out of a Subaru. The car is gutted, in the process of strengthening the cage some. Now gotta decide what to do with the engine if anything. I have this engine, 2 old 240 engines w/ E31 heads as well. I've already traded the flat top carbs for a set of 72 dome carbs, will keep the E36 intake...
Option 1: Keep what I've got, just clean it up a bit and run the dog snot out of it....
Option 2: Buy a turbo F54 block, put the E88 head complete on it and run the dog snot out of it...
Option 3: Buy a F54 flat top block, put the E31 on it - high compression but this will be a track only car so I can spring for the $$ fuel.. BTW, in the latest issue (Nov07) of Grassroots Motorsports, this is what they recommend.. to quote "John Williams recommends starting with a 2.8L block from a 81 or 82 Datsun 280zx for a nice bump in displacement... Top the block with a free-flowing E-31 head treated to a light shave, and the comp ratio will be around 10.5:1 or 11:1. (While the later 280Z and ZX heads have larger valves, the E-31 still flows best)..... With a header and tuning this engine should yield around 180Hp to the wheels.." So they're recommending a basic E31 w/o enlarging the valves here?? Good idea or not?
Option 4: Buy a flat-top F54, then a P90 head, mill it down 0.080, swap the valves for the taller ones from a N47, and shim the towers 0.080. I'd guess this would be the most $$ option of the 3... any guesses what this would cost?? +/- cam swap??
Also, if I do option 3, can I transfer the cam from the 260 to the 240 engine (one of the 240z the valve cover got busted, the cam/valvetrain looks pretty nasty), would it be worthwhile?, or should I spring for a new higher lift camshaft (any recommendations here?)...
Just trying to decide what to do with what I've got...
ed hunter