Panamared2000

Good stuff good prices and good service.

I know this is an old thread but sounds to me like bendix problem. My 2 cents,

This is how they look in the engine bay. I think tomorrow finish the installation.

My 1973Z.

RB26powered74zcar . Thanx. I just drove the car last night and the steering wheel feels super. I bet it gets better with the use. This is the same as a pair of shoes. The more you use them the better they feel. Sonethirty Thanx. You are absolutely right. A wheelskin saves you money and gives the interior a very clean look.

Hi fellows. These are my new items i`ve install today. I like the original steering wheel so I end up buing this stuff. Let me know what you think.

Hi Josh. I think yes.

Hi 75zcar. Dont know exactly but took me near 40 hours by hand. And finish them with a drill and a buffing pad. Good method is to use emery compound and tripoli and some drops of kerosene to polish them.

Thank You 75zcar. Im glad You like em. Need to get this kit to zinc plated the linkages before install the parts. http://www.caswellplating.com/kits/electroless.htm

Hi all. I like to share the work I have done on my carbs. The still need some work to do but they look great. Thanks again Clive (EvilZ).

Thank you gtikyle . As soon I can the pictures are coming. Whish to have the time to take the car to a very nice place to take pictures. At this moment the engine is an L24 matching numbers in the car. But is overbore .30 with new pistons rings. The whole engine visit the machine shop and then it come back home where was built. Have a crane xr3000 with a ps91 coil, pacesseter headers 6-2-1, willwood brakes front and rear. The distributor is the stock one modified on the inside (xr300 optic), taylor wires and NGK Spark plugs, the head is totally rebuilt cylinder head E31. All gaskets and seals are new either, the whole electrical system is fine, new regulator, lightened flyweel, 5 speed tranny and R200 diferential both from a 1983 280zx. The carb is a single one, because it was the one that was a pice of cake to clean and put it to run. The tires are pirelli dragon 215 45 17. the wheels are Koning. At this moment I have an L28 at the machine shop to do the same thing but they are going to run dual SU`s, a fidanza light flyweel and a centerforce dual friction clutch. I dont want to push the gas to much because of a freshly rebuilt engine has only 3.5 miles on it. But runs strong and smooth.

Hi all. I want to share with the people that encourage me to end this beautiful project. Like to thank especially EvilZ and Yetterben for the parts that make possible this thing to be done. Of course there is more people involve like John from bad dog parts, Roger from Zbarn, Dave from ArizonaZcars (Brakes), motorsport and blackdragon for many different parts. Here`s a video of the car with headers and the down pipe. The exhaust sistem is not done yet but Im working on that. Hope you like the videos.

Hi all. If any one can drive me the right direction. I`ve got an S130 couple of weeks ago. It is a manual 5 speed and has a P79 cylinder head. The vin number is JN1HZ04SODX579494. My question is, What year it is? Thank You.

Wow looks awesome. Im going to do the same thing, the only thing is that I want to keep the original steering rack.