Actually.. FWIW, that stock nippondenso distributor has all the info you'll need for full seq. It's got 3 vr sensors built in; g1, g2, ne. 4th pin is common ground. You would use g2,ne, and gnd. I can't give the ne wheel any review though, I'm using the 36-2 as my primary input and the g2 for cam input. Not sure what you have for a motor but if you pulled it from a 96-97 you're in luck because it came with the 36-2 on the crank snout as well as the dizzy. Let me know if you need any other info.