Hey guys, I've got an rb26dett in my z car and for some reason the consult plug doesn't work. I've checked the wiring about 1000 times and its correctly wired per the ecu pin-out diagrams and from what other members say it should be wired. It has 12v power, ground is grounded, the Rx has about 10v, Tx about 10v, and clk 0V. So the weird thing there is that Tx is supposed to have 0V. The other voltages are correct besides the Tx; I checked the wire and it's wired to the Tx pin on the ecu. I'm lost here and have no clue what my next step should be.